HP PSC 1510: Printer problem

Similar Questions

• HP PSC 1510 printing blank Pages

  I use a HP PSC 1510 with a MacBook Pro all-in-one printer.  I tried printing from Word, Excel, and preview, but nothing comes out but the white pages.  It is definitely ink in the printer so I don't know what is the issue.  Any help would be appreciated!

  White pages are usually because the cartridge is empty.  If you are sure that the cartridges are good, and no refills, you may have a hardware problem that needs repair.  In this case, you must call 1-800-HP-INVENT to get it fixed.

• PSC 2410 printer problem

  Try to get the PSC 2410 all in 1 printer at work.  It shows flashing 'on' light, animated hourglass icon on the screen, makes noises as if I try to print whenever I turn it on, but does not pull paper.  Sounds stop after 1-2 minutes, but printer remains inadmissible.  This seems to have originated when I accidentally disconnected the USB port while trying to remove a paper jam.  Have tried all the diagnostics, reset the machine by the orientation of the Web site, but no luck.  Goes into the same mode every time I start her if connected to the PC or not.

  I fear that once that happens there is little you can do. The printer had a fatal mistake in the firmware probably due to missed communication, you have described. The only way to try to resolve the problem of the firmware is to do a hard reset. It is not guaranteed to work, but it's the only thing you can try, unfortunately. I've included the steps below. If this does not work, you will need to replace the printer.
  
  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• HP PSC 2110 printing problems

  I can't get my HP PSC 2110 to print properly with Windows 7.  It prints very well when it is attached to a PC running Windows XP.  All I get with Windows 7 is white pages, or a page with a few words in my document in very large characters.

  Did you follow the instructions here:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796879&LC=en&DLC=en&cc=us&OS=4062&product=79488&sw_lang=

  This driver is installed? It should be included amongst the "HP psc 2100 series" in the printer properties. If this is not the case, go to the Advanced tab, then in the driver box, click the arrow next to the listed driver and see if there is something else. If this is not the case, click new driver and select HP in the left column and the 2100 series driver in the right one.

  After checking the correct driver is installed, print a test page. Is it OK?
  If so, print a document with that you have problems. If this is not correct, check the printer settings in this program to confirm that a large font size is not selected, the scale is not at 125%, etc..

  SC Tom
  -There is no such thing as TMI if you request technical support.

• What to do when the HP PSC 1510 printer rolls do not feed in the document

  There is paper in the tray s supposed to be inserted, the device is on, the ink cartridges ink and all the cables are well connected but when I click on the 'Print' button, the book is not out to print and it keeps telling me that "the printer is out of paper".

  This printer was working fine before. This problem occurred after it has not been used for a fe weeks. It seems that the roller does not pull paper in the printing machine.

  Any suggestion that can solve this problem would be highly appreciated

  Normally dirty rollers cause this problem. The document below the link should have instructions for cleaning the rollers, as well as additional measures to try. If this does not work, you will need to replace the printer. Let me know what happens.

  http://goo.GL/yhLhv

• PSC 1410 printing problems, no errors but printing is delayed and often deleted

  Hello
  It's about a year since the printer is faced with these problems:
  -Whenever the printer is turned on it prints the test page (seems to me that it remains in the memory printing process), this occurs even when the PC is not connected
  -Whenever you ask to print a document, the process is pending, but printing does not start actually, it happens sometimes that spending a few minutes (or 20), printing is successful.

  Power cord and USB are fully functional;
  The copy function and the scanner works perfectly.

  I already tried to uninstall the drivers and install the updates, but problems remain.

  Now I am running Windows 7, but problems occur also in the printer connected to another computer running Windows XP.

  What could be a possible solution?

  Thank you very much

  Hello

  I have seen this before, but on some other products.  The solution seems to be "complete alignment" piece of printer setting.  I've attached the link to the document.  See if that helps...

  http://support.HP.com/us-en/document/c00473766

• HP Deskjet PSC 1510: What is my printer HP PSC 1510 Deskjet have memory?

  I'm about to throw my Deskjet HP PSC 1510 printer, since I recently bought a new HP printer.   The 1510 has a card in there?  I used it several times over the years to copy and scan personal information, so I am very concerned to protect my privacy.   Please notify.

  PSC 1510 has no internal memory that would save personal information once power off...

• Windows RT and HP PSC 1510 all-in-One printer connection

  Hi, I have a Windows 8.1 RT (Microsoft Surface 2) Tablet and HP PSC 1510 all-in-One printer cable. Now when I plug the printer via the USB port, there is no driver who finds himself to make this printer work with my camera. Does anyone have this problem or solutions? I tried to look at HP support and nothing there has been useful.

  Hello

  I'm afraid that the printer is not supported on Windows RT, as you can find listed in the following support document:

  http://support.HP.com/us-en/document/c03168175

  Kind regards

  Shlomi

• I have a psc 1510. How to print a test page everytime I turn it on?

  I would like the 1510 PSC DO NOT automatically print a test page everytime I turn on the printer. I don't do a lot of printing, so I don't want to waste paper by the presence of an extra page printed up evry time I want to just print a few pages. Is there a way to disable this test to the start page?

  I use the PSC 1510 on a Mac, OS X 10.6.8.

  Hi there owen13,

  This sounds like the alignment page must be scanned. This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• HP PSC 1510 all-in-one printer

  My OS is Windows 7.

  I tried to get this printer is installed.  Error messages ' print spooler does not "or" error in C:\program files analysis file (X86\HP\Digital imaging\bin\hpqscloc\103.xml "."). sevveral times it worked for a few pages after his farm and re-booting printer displays "printer troubleshooting."

  Hello

  Please contact the Microsoft Community Forums. I understand you when you try to install the printer you get an error message indicating the print spooler does not.

  Follow the steps for troubleshooting instructions.

  (1) how you try install the printer?

  (2) using a CD/DVD to install the printer?

  Follow the steps for troubleshooting instructions.

  Method 1:

  I suggest you to refer to a link.

  Diagnose and automatically fix problems printing and printer.

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I suggest you the link and download the drivers from the manufacturers Web site and are trying to install.

  HP PSC 1510 All - in - One Printer Drivers & Downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=428800

  If still the problem persists after you perform the steps of troubleshooting from the link and if you have questions related to Windows, please do not hesitate to answer us, we will be happy to help you.

  Thank you.

• absence of dv6/PSC of color printing problem

  I have a dv6-6b91eo laptop core i7 and a machine to print/copy/fax psc 2100. The problem started a couple of days when I had to remove a piece of paper that had tied in the printer. I did a test run from the pc and only got a b/w copy. I thought that maybe the color cartridge had been damaged as asked me to remove the cartridges for inspection. I replaced the cartridge with a new color. I did a test run from the pc and only got a b/w copy. I then tried the copy function and it scanned and printed OK, color and all. So, what to do? Is there a software patch that can fix the problem? I Don t have an installation cd for the PSC, so if that's what is needed I must find it on the web, but where? Is it a pc or a printer problem? Any help much appreciated.

  Hi RnRMusicMan,

  Downloaded and run the HP and Docfor Scan print program, but he found no problem with my system, but after I did a backup copy of files on my external hard drive WD My Passport, and here the dv6 color printing capability has been restored after the backup! Also I have absolutely no idea how or why, but the printer works now dv6 o.k.! If you have no idea why this has happened, please let us know, I really want to know both why stopped dv6 color printing after only eliminate a jam on the psc 2210 (no changes have been made on the dv6 and scanning and printing color directly from the psc2210 worked o.k.) and why it has been restored after having made the back-up file. Very confusing to say the least. I will mark this as a solution, but I would really like to know why.

• printer HP PSC 1310 series problem

  I can make copies and I can scan, but it does not connect to my PC more.

  Hi singleton,.

  1. When did you start to question?

  2. you receive messages or error codes?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following links and try to run Fixit and check:

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:

  You can also try uninstalling and reinstalling the printer and check.

  See the links to HP for more information.

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=360489&prodTypeId=18972&ObjectID=c01573147

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=360489

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP Scan Pro not working not not on HP PSC 1510 while using Mac OS 10.6.8

  Hello all-

  Like others, I've updated my old MacBook Pro to Snow Leopard 10.6.8 operating system and have had problems using the scanner on my HP PSC 1510 all-in-One.

  After uninstalling the old HP software through Apple Software Update, print my HP PSC 1510 and I can scan a document to a TIFF, PDF, etc. using the capture preview and go to the system preferences and select the Print & Fax.    However, it is no longer I can scan to OCR, that was the biggest part of my job.

  I use HP Scan Pro v. 7.4.5, part of v. 1.4.7 HP Device Manager.  HP Device Manager "sees" my HP PSC 1510, but when I use HP Scan Pro, the scanner starts, starts the search, and I get the dialog box "error - Sorry, an unknown error has occurred."

  Any suggestions or advice?  Thanks in advance!

  -Brendan

  Hello

  The HP Scan Pro is an older application, intended for older versions of Mac OS X 10.54 ot.

  Complete Feautre solution software is no longer available for 10.6, scanning is possible via picture Capture, preview and print & fax. Advanced features like OCR are no longer available as part of the provided solution:

  http://support.HP.com/us-en/document/c01846935

  You can check 3rd party applications like Read Iris, OmniPage OCR, etc..

• Alignment of the boring cartridges disorder - PSC 1510 all-in-one

  Hello world.

  By years, I own a robust PSC 1510 that worked really well for me. the problems started when I bought a new HP laptop (pavilion dv6) with Windows 7 hope premium as the operating system. Of course, I have downloaded the latest driver and software available on the HP support site. and everything was still ok since I had to replace the empty cartridges with new ones. then, as usual, the printer starts automatically with the alignment process: it prints a page with the alignment pattern and then asks you to put it correctly into the scanner and take a normal scan.

  but when I finished it the HP solution center software displays me an error message with the following text:

  "accordare no riuscito since it piano inclinato pulito scansione di", which translated from Italian looks like:

  "alignment failed because the surface of scan results to bow.

  WHAT?

  I mean, I always finished this procedure before succesfully on my old PC. What is the problem now? the scanning surface is absolutely perfect!

  However, after the error message, the printer is perfectly usable. But if I turn it off, the next time I turn it on it always starts again vain alignment, consuming a sheet and ink and give the same error message.

  I tried to fullfill the process of alignment with the USB cable disconnected, but even this way won't solve.

  are there different methods to correct this? can I ignore the automatic alignment process by default (I can do it manually when it occurs)?

  any help appreciated. Thank you.

  I run a 64 bit version of Windows 7 Home premium on an AMD dual-core HP pavilion dv6.

  Have you tried to turn the page to see if that makes a difference? Have you tried shoring from one side of the printer during the analysis of the alignment page to see if that helps?

• HP psc 1510 all in one "Solution Center".

  Product name: HP PSC 1510 all-in-one

  OS: Windows 8.1

  My HP PSC 1510 all-in-printer software has become non-functional. I need to download a full installation of the software. I am subject to the sites with drivers. The complete program, WITH SOLUTION CENTER needs to be reinstalled. I don't see that accompany the right drivers.

  I found several sites with the complete list of problems and solutions, even if I tried to restrict the search.

  Could someone please locate this complete? A link that includes the center of Solution would be wonderful.

  The original disc is old several years and normally install on the 8.1.

  Thanks in advance for any help. The hair that I'm pulling too thanks!

  Sincerely

  franm

  Hi FCiurczak,

  Don't pull your hair out, I'll have you happy that you didn't want in no time

  This download includes the HP Deskjet and Officejet Software Suite (advanced imagery and product functionality) and driver. HP Deskjet and Officejet full feature software and drivers.

  Having said that it is version 14.8 so I'm almost certain, that there the Solution Center. Please let me know if that solves the problem.