HP Slimline S5-1414: Memory ECC

Similar Questions

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find

• Shows memory ECC: disabled, no part or serial number?

  I have an end of 2013 MB Pro with 16 GB of memory. Recently, I noticed that when I open the system report and look at memory, it is said that ECC is disabled and gives no series or part number for the memory card (see picture)... I don't think it was the case when I bought it new 3 years ago, but I don't remember the last time I checked the system report. Is this normal, is it potentially something wrong with my memory, what could cause this? If it is a question, how could it be fixed?

  

  Look at this link for the answer:

  https://discussions.Apple.com/thread/2438202?start=0 & tstart = 0

  Ciao.

• Memory ECC on 3.1 Mac Pro compatibility

  Hi guys, I have a feeling that I already know the answer, but I have a question of compatibility memory re: my Mac Pro 2008 of 3.1.

  Specifications are:

  CPU - 2 x 2.8 Quad

  MEM - 8 GB (4 x 2 GB) DDR2 800 MHz

  Graphics - ATI Radeon HD 5000 1024 MB

  Boot disk - 240 GB SSD.

  Today, I bought a Mac Pro (2 x Dual 2.66) 2007 with 16 GB of ram, but it's ram DDR2 at 667 MHz.
  I bought it mainly for the memory, but it is slower than my memory...

  So, I have the following questions:

  1. I guess I can't use both the 667 and 800 in a computer memory sticks?

  2 - my MP (3.1 2008) would perform better with 8GB 800 MHz or 16GB 667 MHz?

  Is there a noticeable difference in performance based on the speed of the memory?

  3. is there a recommended application to test the memory and cpu as well? I'd like also to know if my CPU is "in good health".

  It would make the evaluation tests of memory?

  Thanks in advance

  Hello, here is a link to a discussion on Macrumors mix different speed RAM on the 3.1, it's from 2013

  but it must be relevant to this day. May be useful to some of your questions.

  http://forums.MacRumors.com/threads/800MHZ-and-667Mhz-RAM-not-compatible-Mac-Pro - 3 - 1.1653183.

  You have gray original install disks for the 3.1, if you have the second drive should be the HardwareTest of the Apple.

  Once in the optical Bay restart by pressing the command + D keys, I think it tells you about the disc, it should start after

  a little time and then you will be able to run the tests.

• HP Slimline S5-1414: deliver installation video card the S5-1414

  Before we begin, I want to know that this system is more under warranty, so I'm not worried about voiding the warranty.

  That said.

  I walked into the position of a HP S5-1414, the case was broken, however, the motherboard (Joshua H61) was in perfect condition.

  I installed it in another case, put a power supply Antec TP-750 blue, 2 4 GB Corsair vengeance DDR 3 12800, 4 HD SATA 3 "s and a Samsung SSD Pluged into the port Mini PCIe wireless adapter was installed in. None of the people is the source of the problem.

  The problem I have is that whenever I have install a PCIe video card (in this case a VisionTek AMD Radeon HD 5450 video card) the computer will boot once and then when I reboot it (for example I boot in the BIOS and when I chose save and exit) I get 6 beeps and the yellow HD activity light flashes 6 times. Now I know that this is not the video card because I can install it on my other computers and their initialization very well. I cleaned the contacts, make sure that there is power going to the video card of the PSU, made sure it was plugged into the PCIe connector and ensured that the PCIe ports are active in the BIOS.

  What I'm missing or doing wrong?

  Jim Hutto
  I do not work for HP.
  I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

  In fact the solution, and I feel like an idot do not think first. I had to turn on the legacy support and extinguish fastboot. And Viola it started and I was able to install Windows 7. TY!

• HP Pavilion slimline s5-1010la memory update

  Greetings,

  I want to improve my memory, but I can't understand how a lot of RAM can support. My OS is Windows 7 Ultimate, and I am planing to buy two memory Corsair 8 GB DDR3 Memory Kit (CMV8GX3M1A1333C9). I looked in the MB specs page but cannot find anything.

  I hope you can help out me. Thanks in advance!

  Wave_Rider, it's okay.  HP supports only 4 GB with a 64-bit operating system.

• Slimline s5-1414: Dual Monitors-What adapter to buy

  I am trying to add a second monitor to generic lcd (NEC) to this pc.  I am already using the adapter supplied with the computer in VGA. I always have a DVI port available. Looking at the cards I have no idea as to what adapter I need to buy to connect to my PC.  Can someone tell me what to buy or if you can not do? Thank you much in advance.

  @Procats, welcome to the forum.

  Here are the i/o ports of back on the computer:

  1. Figure: Rear i/o ports
  2. USB 2.0: 4

• HP Slimline S5-1414: problem installing a video card

  This system is more under warranty. Not worried about of voiding the warranty.

  I tried to install a PCIe video card in this card Sapphire Radeon HD 7750 Low Profile of the system. However when I install the computer will beep 6 times and the power light flashes orange 6 times. As a precaution, I installed a 750 Watt Antec power supply (yes he is sitting outside of the case and I put it ashore to the case by a 10 gauge wire soldered to the case and PSU, and yes it's a solid connection) and I also have the latest version of the BIOS installed, which is the Version 8.19 Rev. A. I am currently at a loss. Is there a BIOS setting or rider, I missed?

  Any help would be greatly appreciated.

  Jim Hutto
  I do not work for HP.
  I am a computer technician and a passion for computing with more than 32 years of computer repair and networking experience

  Hello

  Six beeps is a failure of graphics video pre.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  Your PC has only a 220 watt power supply so make sure that the graphics card is assessed by the manufacturer to work with a 220 Watt power supply.

• ECC memory?

  I bought a laptop HP dv7 - 4223ca.

  How can I find out if the memory came installed is ECC memory?

  Thank you

  Leslie

  Hello

  lesliek19 wrote:

  I bought a laptop HP dv7 - 4223ca.

  How can I find out if the memory came installed is ECC memory?

  Thank you

  Leslie

  By downloading and running CPU-z.

  Go to the SPD tab and look at int the box that says buffering. If it is empty your laptop uses no memory ECC. Buffering is an older term for ECC (error correction code).

  

  Best regards
  ERICO

• Workstation Z400: EEC VS. Memory non EEC

  I was told I could use the ram non EEC in my system that comes with the UNECE. Is this possible, and are there disadvantages?

  400workstation, welcome to the forum.

  Here is the user manual for the HP Z workstation series.  On Page 55, it tells you what memory is compatible with the motherboard.  It seems that only ECC memory is supported.  Here's a good explanation of memory ECC and why it is used.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• S5-1414 more ZR2740w 27 "monitor? Sticker of Windows 8?

  Hi, I just bought a S5-1414 opportunity (product # H3Y75AAR) 3.4 GHz computer (Core i3 2130) i3 of office.

  While it is "used", in my opinion, he should have been returned to a store immediately after purchase because his impeccable.  Was missing, so perhaps a disk failure has been the reason for the return or the disc has been removed just somewhere along the way for security reasons, his hard drive.

  It's a small office of nice and I think using it as my main PC since I do not play games that often and could reduce the cost of energy pulling to the top of my Monster Z800.  But I have two questions:

  1) there is a sticker of Windows 8 (just a logo) on the side but no sticker with a product key on the computer.  I guess he had originally one because of the other sticker and drivers seem to only exist for Windows 8 and 8.1.  Before I buy a copy of Windows 8 (or 8.1) I wanted to make sure that there is not a way to get a product key, since I own the computer that originally had a license associated with it.  I know that some systems if they are sold with an operating system license transfers with the material (although you have to buy the installation media).  I bet that this is not the case but I wanted to check before you go spending money unnecessarily.

  (2) can a 27 "ZR2740w be driven by embedded graphics (Joshua-H61-Μatx motherboard with HD2000) graphic on the i3?  The ZR2740w is a GREAT monitor but is not an embedded scaler and will operate only at low resolutions of 2560 x 1440 and one or two.  I guess that the BIOS screens are not at a high enough resolution to display on the screen, but I wonder if once the computer starts Windows (which is not installed, see question 1) the monitor will work.  I don't expect great performances, just enough to browse the web and edit documents.

  Thank you!

  This is the original factory specifications for your desktop HP Pavilion Slimline s5-1414. According to the specifications, this expedition from the factory with Windows 8 is installed. Starting with Windows 8, OEM computer manufacturers are required to encrypt and to integrate the product key Windows 8 in the BIOS/CMOS. This is referred to as a DPK (digital product key).

  It is better to buy and use HP recovery media for the computer, because it returns the computer to a factory State. This includes the original operating system, drivers, software, HP, HP Tools recovery partition, etc. Please see DVD - English, French Windows 8 64 b 12NA3RR8601 to buy this HP recovery media.

  Alternatively, you can try this download of Windows 8 OEM; http://www.Google.com/URL?SA=t&RCT=j&q=en_windows_8_x64_dvd_915440.ISO&source=Web&CD=1&CAD=RJA&SQI=2...

  It is a unofficial "official licensed copy of Windows 8 OEM." Download this file (you may have to try several times or several times successfully download this file) and burn the ISO image to a DVD. Set the BIOS to use UEFI, enable 'Secure Boot' and disable 'Legacy Support... If these options are present. Boot from that disk and install Windows 8. It should register as an official copy and use the key embedded in the BIOS. Please note that any customizations HP or HP value-added is installed using this method.

  S5-1414 will not push the ZR2740w monitor at full resolution. The monitor requires dual-link DVI, whereas the computer does not support the single-link DVI.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Xeon ACER AC100 server memory - where can I get the 16 Gb Kit?

  OK, I bought the ACER AC100 - model XEON and like the SERVER. Installed Essentials 2012 and all is good.

  I want to move the RAM to the 16GB KIT and cannot locate a list QVL of ACER which specifies the compatible memory, manufacturers, kits, etc.

  CRUCIAL.COM lists a 16 GB kit that fits the PLUG but I would rather not order 200.00 $ memory ECC unknowingly will be compatible.

  Anyone?

  Thank you

  Http://panam.acer.com/acerpanam/server/2011/Acer/AC100/AC100_FAQ.pdf page 25 for information on RAM FAQ

• 512 MB SDRAM memory upgrade

  HP Pavilion a1106N with original 2 x 256 MB 240 pin DDR2 SDram PC2 3200 mb/s

  I need to move to full capacity 4x1Go

  My question is:

  is this memory ECC or NON ECC is it important? Support site HP does not say ANYTHING about
  If I buy ECC is compatible or not and vice versa...

  Thank you

  Hello pierjean,

  The model of motherboard you have in your Pavilion, a 1106n is present . I found the information to your specifications on HP supports, as you can see in the memory section it shows the modules of memory non - ECC 4 GB 533/400 MHZ DDR2 4 x 240 pin DIMM sockets support unbuffered. That is why we should use the same type.

  Click on the star of CONGRATULATIONS on the left to say 'Thank you' for helping!
  Please check one option 'Accept as Solution' if it has solved your problem so that others can find it.
  I work on behalf of HP.

• Logging correctable ECC reached - limit State

  Hello

  I upgraded the RAM to X3550M3 (running ESX 4.1.0). Server But when we start the server and check the healthy state on vCenter, I reciveded warning about memory ECC correctable logging limit reached - say. For more details, you can see to attach the file. Could you please help me solve this problem

  Thank you

  Hello

  you have three options:
  (1) take a look at AMM "ECC correctable memory errors limit record reached" - IBM BladeCenter HS22, try to implement the recommendation on the configuration of the BIOS (despite the fact that you have to another server model), reset the sensor and wait for ipmi response
  (2) make reset sensors and wait for the reaction of ipmi
  (3) it is sufficient to change DIMM to checked

• PowerEdge T310 - Memory upgrade Question

  I'm trying to upgrade a T310 to 16 GB of memory. It has a processor Xeon 3430 2.4 GHz with 8 GB of memory installed factory - four 2 GB 1Rx8 DIMM. I want to spend a total of 16 GB so tried to add two 2RX8 4G memory ECC low voltage according to the recommendations of upgrade parts from Dell. The server will not start. I looked through the forum and Dell manuals to try to understand this. Can I switch to 16 GB with 8 GB of memory installed in existing plant, or do I have to replace the existing memory with four 4 GB RDIMMs? Thank you! Bev S

  The DIMMs you listed are actually UDIMM, why upgrade Rdimms do not work for you. Now with those being UDIMM the T310 only supports using total 4 DIMM. In order to reach 16, you will need to replace the existing 2 GB UDIMM with 4 x 4 GB UDIMM.   Which is the same as using just the 2 8 GB Rdimms only to hit the total of 16 GB you are looking for.