HP Stream 13: Compensation of free space after w10 upgraded

Similar Questions

• Reclaim free space after deleting Partition Bootcamp

  After installing a new SSD and gives back to the top of time Machine, I deleted my Bootcamp partition on my MBP using Boot Camp Assistant. The Boot Camp partition, although MS-FAT was no longer bootable after recovery, and I thought again and use Winclone to retrieve my Windows backup.  The result of delete Boot Camp seems good:

  XXXs-MacBook-Pro: ~ the name list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 960,2 GB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 959,3 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  But when I look at the storage, I find that I went 113 GB on my hard drive MacIntosh partition (or says my Time prior Machine backup) to more than 300 GB.  The Boot Camp 118.5 GB partition is gone, but the 'Other' segment seems to have increased to 284 GB.

  

  I see a lot of solutions online for free space recovery after the removal of Boot Camp, but they do not seem to apply to me.  Many are for removals of Boot Camp failed using disk utility.  Several involve CS, but I have no basic storage.  I tried to boot into recovery and repair.  I tried several reboots to clear space.

  Any ideas, please?

  Please after the release of the following OSX Terminal commands...

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  Please enter your password when you are prompted by the command 'sudo '.

• No free space after deleting files - trouble with optimized storage?

  Hi, I have macos Sierra and I deleted many files to my main drive and also to my external hard drive (both to the Mac OS Extended format) in preparation for the boot camp. I also emptied the Recycle Bin, although there is much less space on the two disks that it should be and the majority of the space is obviously indicated under "purgeable". I thought it would not be a problem, because I assumed that the space would be released, if I move all of the files there and if I need for the new Windows partition. However, this assumption was false. I can't simply use storage that I released. I can't move there all the files and I can't create the partition from free space. What can I do with it? It's pretty frustrating... Thanks for the help!

  You must use the Bootcamp Assistant to create the Bootcamp partition.

  Please provide details on the total space and free space on your internal drive. Post screenshots of what you see in system-> storage information. In addition, select the drive in Finder-I press control and post a screenshot of the window read the information.

• vSphere not showing do not free space after deletion

  Hello

  We have ESXi clocked at our remote data center. I recently needed to free up space on the data store, so I used the tool FastSCP remove one VM folders, as I could find no way to do it using vSphere. It seems only to remove no problem, and the deleted folder no longer displays in the view FastSCP or through the vSphere client. But in vSphere, the figure of the free space has not changed. Are there any other required step that I neglected to find that space?

  Thank you

  vSphere client-> configuration-> storage-> refresh?

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• I need more space after an upgrade to Windows 7, cannot remove the gadgets and sidebar, please help

  I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.

  such as word/excell/adobe suite.

  There is nothing on my computer but undesirable, gadgets and games, and there is no space left. How can this be?

  I read that Windows 7 makes your computer faster and better, work how in the heck he will do that, I can't even use my computer because I can not re - install my stuff.

  Windows 7 ultimate me blocks to remove gadgets and the sidebar, I removed all these on my vista so I could install and use my suite of adobe for school

  I'm panicking, I chose to do this on the weekend, so it would not interfere with my school and work, but now I can't do anything. I tried to call Microsoft, but they have no help available

  Please someone help me?

  Thank you

  Gina

  I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  If you have a huge amount of RAM the pagefile and hibernation can occupy a large amount of disk space. 6 GB of RAM can cause 12 GB of space to be resumed by using the default settings of Windows.

  1 put the hibernation - note: you will not be able to sleep extended
  A. click on start
  B. Select all programs--> accessories
  C. right click on CMD.exe and select run as administrator
  D. at the prompt, type how: powercfg-h off
  E. press ENTER, then exit CMD. You may need to restart

  2. reduce the size of swap file
  A. open Control Panel and select system and security.
  B. click on system
  C. click on advanced system settings.
  D. click on the Advanced tab.
  E. in the performance section click on settings.
  F. click on advanced and select change in the virtual memory section.
  G. uncheck automatically manage Pagefile size
  H. Select custom and

  
  I. enter a new amount. Enter the same number in both boxes. Minimum: 1 GB (or 1024MB).
  I. click on set, then OK.
  J. restart your computer

  Delete Windows.old on your C: drive

  Usually, but not always, after installation of Windows 7 you have a Windows.old folder on your C: drive that contains your files and data from the previous installation of Windows and allows you to go back to a previous version of Windows. Open Windows Explorer and under 'Computer' click the C: drive - if the Windows.old folder is on your hard drive, it will contain all of your files to the Windows system, and it can be removed if you do not need to free up space on your hard drive.

  If she's not here, make sure you can see the Windows.old folder:
  1. click on start, type: hidden
  2. click on 'display the hidden files and folders '.
  3. Click to select "show the hidden files and folders".
  4. click OK and look for the folder
  (Note: when you go back and uncheck the "Show files and folders")

  How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  If the Windows.old folder does not remove:
  In Windows Explorer, you should see a folder called Windows.old on your C: drive. That contains all of your files from your previous installation. If you need all the files, you can copy them to another folder and then delete Windows.old. If you do not need anything in the folder, it is safe to delete.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• p6230be: DVD not recognized after W10 upgraded

  After the upgrade to Windows 10 on my Pavillion p6230be DVD player is no longer recognized.

  It does not appear as a device more.

  I tried the registry tweak, but it does not solve the issue.

  Advice to solve this problem?

  All comments are welcome

  Hubert, welcome to the forum.

  You run Windows Update to see if that solves your problem.  There is no Win 10 driver for your HP computer.  In fact, I doubt that HP will develop pilots because your computer is 6 years old.  That's the problem with the update to newer operating systems.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• down free space after doing a windows update!

  OK, I don't know what's going on, but after I installed the updates of windows on my computer, I lost 3 GB of space free all together! (at first it was only 1 to 2 GB, and I brushed it off because I think it's the space updates have taken place, but then decreased 1 GB of itself!)

  I'm not using the inet (well, except for the now, since my question) and I was running just a scan of Prevx (since SpiritX recommends so in its messages)

  everyone knows what is happening?

  [1].. .but it was produced AFTER I did the update. Why this is starting to happen only AFTER the update

  [2].. . How do delete you old shadow copies and keep the most recent 1?

  A1. The SP2 installer alone can be as large as 577,4 MB.

  A2. You will find support for this in the forum of the Performance & maintenance:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• vFRC shows no free space after restart of the vcenter

  I have a new cluster I implement vFRC on. The cluster runs great and the vFRC which seems to work without problems. Unfortunately to restart my VCenter the hosts in the cluster always show all they have vFRC installed, but show 0 MB of available space. The only way to clear it is to place the host in maintenance mode.

  It is of course difficult since it happens to all hosts on the cluster at the same time. Forces me to each stop all the VM on a host or disable vFRC on the virtual machine to a host to get into maintenance mode.

  Anyone know if this is expected behavior?

  or if there is problem kb/known, and I'm not finding?

  or a good direction to go to diagnose why this is happening?

  I am running

  6 3018524 on windows 2012R2 vCenter fully patched

  ESXi 6 u1 3380124

  Reference Dell servers R730

  vFRC on intel P3600 (NVMe interface)

  How your vCenter is allowed? EntPlus?

  What type of shared storage do you have? What is a San with an option of Flash?

  I've been looking for KB and found this one. Have you seen this one yet? http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2136867

  Otherwise, I found the list of best practices in the guide of vFRC 5.5, which remain valid for the v6, and I would check that these are achieved before continue.

  https://www.VMware.com/files/PDF/Techpaper/vfrc-perf-vsphere55.PDF

• How can I delete all but 2015 to 2016 nigh (ios10.0.2) iPhone photos to free up space, after synchronizing all photos on my Mac (Yosemite 10.10.5)?

  How can I remove all but 2015 to 2016 photos from my iPhone (ios10.0.2) for free space, after synchronizing all the photos on my mac (Yosemite 10.10.5) computer?

  The fastest way I can think of would be to go to the Albums, go to all the Photos tab, highlight the photo you want to delete and press 'Select' in the upper right corner. Place your finger on the first complete line, you want to remove (if you have pictures that do not have a complete row that you want to remove these institutions, select them individually first), slide your finger on the line so that they are all selected, and then slide up so that it starts automatically at your old photos of scrolling. Once the photos you want to delete are selected, press the trash in the lower right. This will move them to your album "Recently deleted", then they will be always on your phone for 30 days, unless you remove them. If you are sure that you have already backed up these photos and does not accidentally still photos you want, feel free to remove them.

• How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  How can I transfer my photos to iCloud by using a MacBook Air to an external hard drive?  After downloading, my iCloud pictures can be deleted to free space on my iPhone 6 s?

  Archive or make copies of your iCloud - Apple Support data

  http://www.IMore.com/how-backup-your-icloud-photo-library

• I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please.

  I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please. I deleted all the old temporary files, all the old restore points, all files update of Windows that have been applied, but still can't below 10% free space. The unusual thing only I see, the defragmentation runs (when I force him) but still shows 62% of file Fragmentation?    Any help would be appreciated... Thank you.

  These can be useful:

  How to recover disk space on Windows Server 2008 and Windows XP computers

  http://www.Piriform.com/CCleaner

  John

• ASM diskgroup space do not free themselves after RMAN archivelog delete

  Version Infra grid: 11.2.0.4

  DB version: 11.2.0.4

  OS: Oracle Linux 6.4

  Storage: Enterprise-class storage (EMC VMAX)

  We are in the Bank we have a database of CARS of Production 2 nodes very critical.

  Newspaper archives are stored in ARCH_DG diskgroup. Because of the unexpectedly heavy workload, our diskgroup ARCH_DG became full and we got the usual error

  ORA-00257: archiver error. Connect internal only, until this just released.

  To wear the DB back to business quickly, I tried to delete the old archive logs more than 1 day of the diskgroup first using the following command

  RMAN > delete noprompt archivelog until ' SYSDATE-1';

  So, I started to see the following message

  
  

  RECID = STAMP 19807 = 849396325 name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10066.331.849396309 archived log file

  Delete archived log

  RECID = STAMP 19809 = 849396940 name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10067.274.849396925 archived log file

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10068.341.849397529 RECID archived log file = 19810 STAMP = 849397543

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10069.298.849398167 RECID archived log file = 19812 STAMP = 849398182

  Delete archived log

  RECID = STAMP 19813 = 849398806 name=+ARCH_DG/bsoaprd/archivelog/2014_06_05/thread_2_seq_10070.317.849398783 archived log file

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_05/thread_2_seq_10071.342.849399327 RECID archived log file = 19814 STAMP = 849399337

  Although I could see messages "deleted archived newspaper" as stated above there are 2 inconsistencies (odd behavior)

  1 inconsistency. Not a single byte released upwards of archive diskgroup. Each log archiving is 4 GB in size. I got "journal archived deleted" message at least 25 archived log files. For example, 100 GB should have been released.

  The diskgroup to archive has remained at 99.9% as shown below and the DB was inaccessible.

  SQL > select name,.

  Round(total_mb/1024,2) Total_GB.

  Round(free_mb/1024,2) Free_GB.

  free_mb/total_mb * 100 "% free"

  ABS ((free_mb/total_mb*100)-100) '% complete '.

  v $ asm_diskgroup;  2 3 4 5 6

  NAME TOTAL_GB FREE_GB % free full
  ------------------------------ ---------- ---------- ---------- ------------
  ARCH_DG 1000.78 99.9223633.077636719
  DATA_DG 10000.02 1188.19 11.8818616 88.1181384
  OCR_VOTE_DG 12 11.09 92.4623525 7.53764754
  < snipped >

  
  

  Inconsistency2. The number of available archived newspapers remained unchanged. He was always showing 301

  SQL > select count (*) from v$ archived_log where status = 'A ';

  COUNT (*)

  ----------

  301

  RMAN later > remove obsolete; command removed 17 archived newspapers.

  This means that 17 x 4 = 68 GB should have been released.

  But Diskgroup of free space and the County of v$ archived_log.status = 'A' is unchanged, as mentioned above.

  , Of ASMCMD, I deleted manually a full archive directory connects using rm-rf command.

  Even after running rm - rf on a whole directory full of archived newspaper space was not released and we always receive ""ORA-00257: archiver error '. "

  So, we had to shoot down the cluster using "stop crsctl crs. After the cluster has been raised using 'crsctl start crs' on both nodes,

  space has been freed up, and the DB became accessible.

  I wonder why the ASM diskgroup space was not release despite the removal of the archive logs. Are the 1 & 2 above mentioned inconsistencies caused by something handle to open the file ?

  Hello

  Please run command you at the level of the ASM, below

  SQL > alter diskgroup check all the repair;

  -At the end of the same thing, run below command and enable it to perform

  SQL > alter diskgroup rebalance power 4.

  -To validate the space

  $ asmcmd Pei lsdg

  Kind regards
  Loriette

• How much free space will be left after you import?

  Hallo. I need to replace all the patterns on the integration server using those on the production server. I want to know how much free space is left on/off data to the integration server after this kind of refreshment. The two databases are Oracle 9 so I'll use exp/IMP. Here's how I do it. Could check you if I think that good? It is 72 GB of free space on/data on the target server.
  
  Size used Avail capacity mounted file system
  / dev/vgsmxdata/lvsmxcopy G 194,74 122,56 72,18 G G 63% / data
  
  Overall size of the exported schemas of the SOURCE_DB is 150 GB. The same patterns on TARGET_DB takes 90 GB. If the difference is 60GB. Free space in the data files in TARGET_DB is 30 GB. This means that in the first place, the free space in the data files is filled and after that datafiles extend? This would mean that a database would extend up to 150 GB and data/free space would be 40 GB after updating. Am I wrong?
  
  SELECT ' TOTAL :'|| SUM (ALLOCATED_MB),
  ' USE :'|| SUM (USED_MB) USED,
  "FREE :'||". SUM (FREE_SPACE_MB)
  FROM (SELECT SUBSTR (df.NAME, 1, 40) file_name, df.bytes / 1024 / 1024 allocated_mb,)
  ((df.bytes/1024/1024)-NVL (SUM (dfs.bytes) / 1024 / 1024, 0)) used_mb,)
  NVL (SUM (dfs.bytes) / 1024 / 1024, 0) free_space_mb
  V $ datafile df, dfs dba_free_space
  WHERE df.file # = dfs.file_id (+)
  GROUP OF dfs.file_id, df.NAME, df.file #, df.bytes
  ORDER BY file_name);
  
  SOURCE_DB@Server1
  TOTAL (MB): 170860.984375
  USED (MB): 152777.859375
  FREE (MB): 18083.125
  
  TARGET_DB@Server2
  TOTAL (MB): 121634,984375
  USED (MB): 92853,109375
  FREE (MB): 28 781 875
  
  Published by: Przemek P on October 9, 2012 10:48

  There are a few potential pitfalls. First of all, when you import, the definition of the INITIAL segment may be too big, using more place you expect. This can be things like adding many lines, remove them and do not reset the high watermark before an insertion above the upper limit, or sometimes old problems that nobody noticed have stayed or reproduced. Second, if you have tables that have been updated, by using the pctfree in most blocks, then pctfree is honored to import, leaving more room never-to-be-used in blocks.

  From my experience, those who do rarely estimate more than 10% to the title, but sometimes previous misadventures are not completely fixed, wasting a lot of space or using excessive space. I spend usually less computing time and time of observation. But then again, I know what to expect of my App YMMV.

• After that I deleted my pictures for free space, it still shows in circles that there is no space available. What should I do? Can anyone help?

  I have an iPhone 16 GB, 6, and recently I received notifications that I have low storage. I deleted more than 400 pictures for free space and when I return to my settings it shows that I have no space available. I don't know what to do and it's really frustrading.

  Just to be safe, you deleted the content of the album "recently deleted" inside the photo app?

  If Yes, have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by doing this, but it can cure a few glitches.

  If still no luck, set it back to factory settings and restore from last backup:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Connect to iTunes and check the status bar to see which section is the largest?

• After systemrestore free space left on the memory

  I did a lot of restoration of the system of recent times, downloading some applications like Frontpage to use for my dish and then copying the disk then I just system restored to an earlier time before that I had installed Frontpage or any software that I had to do.

  My free space on my computer toshiba laptop fell to 23%, is it possible that I can increase it because she was no longer always on before I started regularly using System Restore. I checked all my existing files in the Panel and there is nothing there I don't know, but it seems that the apps I've used always take memory even if I can't locate them.

  Can anyone help?

  Den

  Hello

  I put t know exactly what happens on your HARD drive, but try to learn more about restoring system read the http://www.microsoft.com/technet/prodtechnol/winxppro/plan/faqsrwxp.mspx FAQ