vSphere not showing do not free space after deletion

Similar Questions

• Reclaim free space after deleting Partition Bootcamp

  After installing a new SSD and gives back to the top of time Machine, I deleted my Bootcamp partition on my MBP using Boot Camp Assistant. The Boot Camp partition, although MS-FAT was no longer bootable after recovery, and I thought again and use Winclone to retrieve my Windows backup.  The result of delete Boot Camp seems good:

  XXXs-MacBook-Pro: ~ the name list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 960,2 GB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 959,3 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  But when I look at the storage, I find that I went 113 GB on my hard drive MacIntosh partition (or says my Time prior Machine backup) to more than 300 GB.  The Boot Camp 118.5 GB partition is gone, but the 'Other' segment seems to have increased to 284 GB.

  

  I see a lot of solutions online for free space recovery after the removal of Boot Camp, but they do not seem to apply to me.  Many are for removals of Boot Camp failed using disk utility.  Several involve CS, but I have no basic storage.  I tried to boot into recovery and repair.  I tried several reboots to clear space.

  Any ideas, please?

  Please after the release of the following OSX Terminal commands...

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  Please enter your password when you are prompted by the command 'sudo '.

• No free space after deleting files - trouble with optimized storage?

  Hi, I have macos Sierra and I deleted many files to my main drive and also to my external hard drive (both to the Mac OS Extended format) in preparation for the boot camp. I also emptied the Recycle Bin, although there is much less space on the two disks that it should be and the majority of the space is obviously indicated under "purgeable". I thought it would not be a problem, because I assumed that the space would be released, if I move all of the files there and if I need for the new Windows partition. However, this assumption was false. I can't simply use storage that I released. I can't move there all the files and I can't create the partition from free space. What can I do with it? It's pretty frustrating... Thanks for the help!

  You must use the Bootcamp Assistant to create the Bootcamp partition.

  Please provide details on the total space and free space on your internal drive. Post screenshots of what you see in system-> storage information. In addition, select the drive in Finder-I press control and post a screenshot of the window read the information.

• I'm unable to reclaim space after deleting data files.

  Dear all.
  
  I'm unable to reclaim space after deleting data files.
  
  Scenario:
  
  One of my mount point has reached full growth of undotablespace (undotbs2), so I spent again (undotbs3) and deleted the old.
  Problem 1.
  Failed to retrieve space after removing the undotbs2.
  Problem 2.
  Dial-up Mount also become fully...:)
  
  The steps that I followed for the switching of the cancellation:
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64bi
  PL/SQL version 10.2.0.3.0 - Production
  CORE Production 10.2.0.3.0
  AMT for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - production
  NLSRTL Version 10.2.0.3.0 - Production
  
  
  SQL > show Cancel parameter
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  UNDO_MANAGEMENT string AUTO
  UNDO_RETENTION integer 32400
  undo_tablespace string UNDOTBS2
  
  
  SQL > select BYTES/1024/1024, FILE_NAME in dba_data_files where nom_tablespace = 'UNDOTBS2 ';
  BYTES/1024/1024
  ---------------
  FILE_NAME
  ------------------------------------------------------------------------------------------------------------------------------------------------------
  45688.125
  /U04/oradata/RADPRDMH/undotbs02b.dbf
  6268
  /U04/oradata/RADPRDMH/undotbs02a.dbf
  
  
  
  CREATE UNDO TABLESPACE undotbs3
  DATAFILE ' / u05/oradata/RADPRDMH/undotbs03a.dbf'
  SIZE 5000M AUTOEXTEND ON;
  
  
  ALTER SYSTEM SET UNDO_TABLESPACE = undotbs3 SCOPE = BOTH;
  
  
  DROP TABLESPACE UNDOTBS2 INCLUDING CONTENT AND DATA FILES;

  Only solution is umount the point of editing or the db bounce. It is because of 'SEMAPHORE '.

  Semaphores are sharable resources who take a non-negative integer value. They are manipulted by the P (waiting) and V (signal) functions that decrement and increment the semaphore, respectively. When a process needs a resource, a "waiting" is issued and the semaphore is decremented. When the semaphore contains a value of zero, the resources are not available and the calling process turns or blocks (if applicable) until resources are available. When a process opens a resource controlled by a semaphore, it increments the semaphore and the waiting process are advised.

• ASM diskgroup space do not free themselves after RMAN archivelog delete

  Version Infra grid: 11.2.0.4

  DB version: 11.2.0.4

  OS: Oracle Linux 6.4

  Storage: Enterprise-class storage (EMC VMAX)

  We are in the Bank we have a database of CARS of Production 2 nodes very critical.

  Newspaper archives are stored in ARCH_DG diskgroup. Because of the unexpectedly heavy workload, our diskgroup ARCH_DG became full and we got the usual error

  ORA-00257: archiver error. Connect internal only, until this just released.

  To wear the DB back to business quickly, I tried to delete the old archive logs more than 1 day of the diskgroup first using the following command

  RMAN > delete noprompt archivelog until ' SYSDATE-1';

  So, I started to see the following message

  
  

  RECID = STAMP 19807 = 849396325 name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10066.331.849396309 archived log file

  Delete archived log

  RECID = STAMP 19809 = 849396940 name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10067.274.849396925 archived log file

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10068.341.849397529 RECID archived log file = 19810 STAMP = 849397543

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_04/thread_2_seq_10069.298.849398167 RECID archived log file = 19812 STAMP = 849398182

  Delete archived log

  RECID = STAMP 19813 = 849398806 name=+ARCH_DG/bsoaprd/archivelog/2014_06_05/thread_2_seq_10070.317.849398783 archived log file

  Delete archived log

  name=+ARCH_DG/bsoaprd/archivelog/2014_06_05/thread_2_seq_10071.342.849399327 RECID archived log file = 19814 STAMP = 849399337

  Although I could see messages "deleted archived newspaper" as stated above there are 2 inconsistencies (odd behavior)

  1 inconsistency. Not a single byte released upwards of archive diskgroup. Each log archiving is 4 GB in size. I got "journal archived deleted" message at least 25 archived log files. For example, 100 GB should have been released.

  The diskgroup to archive has remained at 99.9% as shown below and the DB was inaccessible.

  SQL > select name,.

  Round(total_mb/1024,2) Total_GB.

  Round(free_mb/1024,2) Free_GB.

  free_mb/total_mb * 100 "% free"

  ABS ((free_mb/total_mb*100)-100) '% complete '.

  v $ asm_diskgroup;  2 3 4 5 6

  NAME TOTAL_GB FREE_GB % free full
  ------------------------------ ---------- ---------- ---------- ------------
  ARCH_DG 1000.78 99.9223633.077636719
  DATA_DG 10000.02 1188.19 11.8818616 88.1181384
  OCR_VOTE_DG 12 11.09 92.4623525 7.53764754
  < snipped >

  
  

  Inconsistency2. The number of available archived newspapers remained unchanged. He was always showing 301

  SQL > select count (*) from v$ archived_log where status = 'A ';

  COUNT (*)

  ----------

  301

  RMAN later > remove obsolete; command removed 17 archived newspapers.

  This means that 17 x 4 = 68 GB should have been released.

  But Diskgroup of free space and the County of v$ archived_log.status = 'A' is unchanged, as mentioned above.

  , Of ASMCMD, I deleted manually a full archive directory connects using rm-rf command.

  Even after running rm - rf on a whole directory full of archived newspaper space was not released and we always receive ""ORA-00257: archiver error '. "

  So, we had to shoot down the cluster using "stop crsctl crs. After the cluster has been raised using 'crsctl start crs' on both nodes,

  space has been freed up, and the DB became accessible.

  I wonder why the ASM diskgroup space was not release despite the removal of the archive logs. Are the 1 & 2 above mentioned inconsistencies caused by something handle to open the file ?

  Hello

  Please run command you at the level of the ASM, below

  SQL > alter diskgroup check all the repair;

  -At the end of the same thing, run below command and enable it to perform

  SQL > alter diskgroup rebalance power 4.

  -To validate the space

  $ asmcmd Pei lsdg

  Kind regards
  Loriette

• drop partition not increasing not free space in dba_free_spaces

  I'm using Oracle 11.2.0.3.
  
  I had a script that droped from the partitions of a table that should have fallen close to 30 GB of data. We have the data and index tablespace.
  
  Dba_free_space request showed no change data tablespace. However, the tablespace index increased in free space.
  

  select  sum(bytes / (1024 * 1024 * 1024)) "Size (GB)"  from dba_free_space where tablespace_name ='&tbs_name'

  I use following command to delete the partition

  ALTER TABLE table_name
  DROP PARTITION "partition_name" 
  UPDATE GLOBAL INDEXES;

  What should be done to increase the free space reported for the tablespace after drop partition?
  
  Thanks for the time.

  >
  http://docs.Oracle.com/CD/E11882_01/server.112/e26088/statements_3001.htm#i2131064

  ALTER TABLE table_name DROP PARTITION 'nom_partition' drop storage UPDATE GLOBAL INDEXES
  >
  Incorrect answer - DROP of STORAGE option applies to TRUNCATE the PARTITION not to DROP as the doc explains. A simple test that will confirm.

  alter table emp_part_test drop partition sys_p341 drop storage
  
  ORA-14048: a partition maintenance operation may not be combined with other operations
  

• Canvio 500 GB is not free space

  I own Canvio 500 GB external HARD drive
  When I delete sonething, space will not grow.
  for example:
  I got 70 gb space.
  I deleted a 3.5 GB file.
  free space is always 70 GB.

  How can I solve this problem?
  Thank you.

  In my opinion you did not check properly the available space.
  Where the files have been deleted from the external HARD drive, I recommend you refresh the connection of drive HARD just to check if the available space would be indicated correctly.

  Disconnect the external DRIVE of the laptop drive and plug it in again. Go to the properties of the HARD drive and check the available disk space

• Disk recovery shows that the free space of 100%

  Using the windows console 8 disk mgmt my boot HD indicates 4 Partitions - OK.

  However, restorations and the scores of health they are 100% free space.

  It's not just is it?

  Hello. Think of that man. All partitions on the volume show the values which the reset button.
  Thank you.

• HP Stream 13: Compensation of free space after w10 upgraded

  I got upgraded from W8.1 to W10 using Windows Update.

  Now, I would welcome advice on what I can now delete to create more free space. I find myself with 6.16 GB of free space on my C drive after installing my programs required. I have a SDHC card installed for the registration of documents, etc..

  I looked at the disk cleanup and see that within the system of files I have two as candidates for deletion but don't want not just to clean up these files without thinking it through.

  They are:

  1. the previous Windows Installations 19.2 GB file size

  2 size 1.03 GB Windows Setup files

  No one knows for sure if I'm sure to clean up these two files?

  Thank you

  L

  Thanks WAWood for your last response. I'll stick with my recovery media to a USB for W10 flash drive.

  just one more question. Do you know if 3 or 4 GB C drive space is sufficient to store the operating system Windows 10. The reason why I have ask if I delete files from previous Windows by cleaning disk that I want to do it looks like I'll have about 26GB my book of 32GB of space?

  Thank you
  l

  FINALLY I BIT THE BULLET AND DELETED THE PREVIOUS LISTED AS 19.2 GB WINDOWS INSTALLATION. SURPRISE, SURPRISE ALL WENT AHEAD, BUT ONLY, I HAVE ACQUIRED AN ADDITIONAL 3 GB. I'M NOW 10 GB OF FREE DISK SPACE C MY COMPUTER WHICH IS OK, BUT WHAT HAPPENED TO THE OTHER SUPPOSED 16 GB?

  ALLS WELL THAT ENDS WELL. THANK YOU FOR YOUR INTEREST >

• Message says low disk space on recovery D, free space by deleting files to support...

  Original title: get the message on the recovery of free space low disk space by deleting files bear D. I deleted by using disk cleanup, but I still get the same message?

  I got disk spave low recovery D ask me to use Disk Cleanup to delete the old files. I deleted many files and none using programs and I still get the same message. How can I clear this problem? I'm using Vista Home premium.

  Hello

  In NO case should remove anything from the recovery partition.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.

• Why my UNDO is not free space?

  Hi all

  11.2.0.1

  AIX6

  We continue by executing the same batch of jobs and app every day.

  I want to check what UNDO is my data used in a day.

  So I reset my undots1 drop it, created a new undots2 for a fresh reboot.

  Then, I followed the use of CANCEL at the end of the first day. It has reached its use 6 GB.

  To my knowledge, I thought it will just all reuse the days of size and extend no more.

  But when I check the next day, he grows up to 7 GB and the next day as well.

  My CANCELLATION continue to grow forever?

  What happened, if I put my UNDO_RETENTION = 0? so it will free up the space used immediately?

  Is this possible? How can I configure my UNDOTS to release quickly once I have post the transaction?

  Thank you all,

  pK

  As I said before, if you're not facing problems, you don't need to change anything. Your settings look good.

  If you look at several that queries will fail with errors, you can then start diagnose more on UNDO tbs parameters.

  You can read through the following about the holdback, the optimal undo retention period.

  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/undo.htm#ADMIN11463

  To the size of your Undo tablespace, use the Advisor to cancel, you first estimate these two values:

  -The length of your planned more long running query

  After the database has completed a cycle of workload, you can display the field in the query to run longer on the subpage of the activity of the system of automatic the Undo Management page.

  -L' longer interval that you will need for operations to Oracle Flashback

  For example, if you plan to run Oracle Flashback queries for 48 hours in the past, your Oracle Flashback condition is 48 hours.

  Then take the maximum of the two values, and use that value as input to the Advisor to cancel it.

  The Advisor to cancel running does not change the size of the undo tablespace. The Counsellor simply returns a recommendation. You must use ALTER DATABASE to change the size of the tablespace data files.

  Kind regards

  Suntrupth

• vFRC shows no free space after restart of the vcenter

  I have a new cluster I implement vFRC on. The cluster runs great and the vFRC which seems to work without problems. Unfortunately to restart my VCenter the hosts in the cluster always show all they have vFRC installed, but show 0 MB of available space. The only way to clear it is to place the host in maintenance mode.

  It is of course difficult since it happens to all hosts on the cluster at the same time. Forces me to each stop all the VM on a host or disable vFRC on the virtual machine to a host to get into maintenance mode.

  Anyone know if this is expected behavior?

  or if there is problem kb/known, and I'm not finding?

  or a good direction to go to diagnose why this is happening?

  I am running

  6 3018524 on windows 2012R2 vCenter fully patched

  ESXi 6 u1 3380124

  Reference Dell servers R730

  vFRC on intel P3600 (NVMe interface)

  How your vCenter is allowed? EntPlus?

  What type of shared storage do you have? What is a San with an option of Flash?

  I've been looking for KB and found this one. Have you seen this one yet? http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2136867

  Otherwise, I found the list of best practices in the guide of vFRC 5.5, which remain valid for the v6, and I would check that these are achieved before continue.

  https://www.VMware.com/files/PDF/Techpaper/vfrc-perf-vsphere55.PDF

• down free space after doing a windows update!

  OK, I don't know what's going on, but after I installed the updates of windows on my computer, I lost 3 GB of space free all together! (at first it was only 1 to 2 GB, and I brushed it off because I think it's the space updates have taken place, but then decreased 1 GB of itself!)

  I'm not using the inet (well, except for the now, since my question) and I was running just a scan of Prevx (since SpiritX recommends so in its messages)

  everyone knows what is happening?

  [1].. .but it was produced AFTER I did the update. Why this is starting to happen only AFTER the update

  [2].. . How do delete you old shadow copies and keep the most recent 1?

  A1. The SP2 installer alone can be as large as 577,4 MB.

  A2. You will find support for this in the forum of the Performance & maintenance:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• not reclaimed space Jefferson deleting user

  Hi all
  
  OS:-RHEL 5.2
  database:-oracle 10.2.0.1
  
  I let fall a user of my database due to the lack of space on partition.but that he didn't reclaim space in database and keep saying space space on partition... I tried to alter tablespace colesce, but same result, as it is to have several data files that I am incapable of knowing what data file to resize...
  
  I also purge recyclebin, but no luck, how do I reclaim space in the tablespace level? I also tried to resize to database but got
  

  ORA-32773: operation not supported for smallfile tablespace USERS

  Thus, any suggestions would be appreciated, that the user had 4 GB of space, and I dropped it, but still unable to recover from the space... How can I do this?
  
  Thanks and greetings
  VD

  you need to subscribe to the ' ' alter database datafile "' | file_name | " ' ' resize ' "part of the script so that you run that queries to see the sizes of the data files and the sizes they will shrink to.

  Hemant K Collette

• My drive (D) shows only 8% free space

  How can I get to the top of files on drive D... he see no paper clip etc., but he said there are more than 10,000 files... y at - he a way in in this without having to buy something to do for me... nothing I have tried seems to work... What's the secret

  Hello

  What you use drive D: for and what size is?

  If there is between approx. 5-12GBs in size, it is a recovery partition.

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon.