HP System Management Homepage at VMAs

Similar Questions

• Load/CPU Distributed System Manager

  Hi all

  I just finished real-time 1 training where I learned about the Distributed System Manager.  Then, I deployed a project Veristand and watched.  For me, what I see, it's disturbing, but I'd appreciate your opinions.  While watching the processors, they seem to be occasionally exchange of charges autour.  Veristand project should be "slowed down" meaning that the HIL is not yet turned on, if the PXI chassis should be executed (2) models and custom devices (6) in a stable condition.  There is a good chance that all 6 custom devices work call loops (that I just learned is not recommended).  Also there are moments where two of the proccessors slowly seem to swap loads (in the attached zip) rather than the wobbly behavior below.  Any ideas?  Is - this inidicative of an unhealthy system definition?

  

  CPU scheduling is an interesting topic, and although deliberately threads to different processors can affect the determinism of a system, RTO Scheduler can and will move threads to different processors at different times. Moral of the story, what you're seeing should and fine as long as the use of a processor not individual rail.

  Now, if you want more control, VeriStand gives you the ability to control where to run most things. You specifically mention templates and custom devices:

  Models - you can specify, on a per model basis, what basis they run on. See "Processor" command on the model configuration page.

  Personalized custom - Inline peripheral devices will be running on the same core as the PCL; Custom asynchronous devices (which I'm assuming yours are because they use call loops) will run on what basis you say them.

• Real-time System Manager

  Hello world

  How can I open real-time System Manager to monitor on my project of myRIO resourses?

  I've already activated the VI server on the target.

  If I select Tools-> real-time Module I find only "Project Wizard", "set up Time-triggered network" and "viewer of Trace".

  Thank you in advance,

  Lorenzo

  The "Distributed System Manager" is an application/executable separated - you can find it, if installed, on the start menu under the folder "National Instruments". If it is not there, then you probably have installed as part of your installation - raise your LV Installer and choose to install.

  Alternatively, you can use the System Configuration API to read the various parameters (e.g. CPU / memory) on the target itself to monitoring the health of the system.

• Sharing network Variable not in Distributed System Manager

  I have experience with LocalHost.   I have 2 computers A, B.  A, I can read a created/static SNV of B.  However, I need to use a SNV on A to A (I don't know why, I inherited this project and it is not at all commented).  So I create and I see it on my drive D:\\.  However, when I go to NI DIstributed System Manager, there are no library under localhost.  So I write in a VI and call it in another, and I get "DataSocketRead in VI" with the code 56.  Don't know why I can't have it is the Manager.

  I have attached ahev the library in case something wrong here.

  Have you deployed and right click the shared variable library?

  If it's an executable in the bulder properties you should check to deploy shared variables.

• the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

  I get this error when I want to mount the store point
  in exchange server 2003

  the specified virtual machine is currently not runing ID no: c1034a70 exchange System Manager

  Labor exchange in cluster

  Hi Mohamed Essa,

  The question you posted would be better suited in the Forums of Exchange Server. I would recommend posting your query in the TechNet Forums.

  TechNet (Exchange Server) Forum

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  I hope this helps.

• Dell OpenManage (64-bit) Version 8.3.0 systems management software

  Dell OpenManage Systems Management Software (64 - Bit) Version 8.3.0 will work on a server of PE2900 running Windows Server 2008 R2?

  Dell OpenManage Systems Management Software (64-Bit)

  Version 8.3.0

  Hello

  I'm afraid that OM 8.3 does not support PE2900.

  topics-CDN.Dell.com/.../Dell-OpenManage-Software-V8.3_support Matrix_FR - us.pdf

  Note: This forum is dedicated for OpenManage Essentials. In the future please post your query on OMSA on respective forum for quick/prompt response.

• NE56R10U won't let me log on or create a new account says error my account has been disabled and see my System Manager

  I had some viruses and malware on my laptop and I decided to just wipe it off and restart. Well now its request for a user name and password and when I get it, it says incorrect sound. and when I go on administering it says that my account has been disabled and see my System Manager. Help, please

  When you install Windows on a blank disc, then you are prompted for a user name and a password. This is the account that you now use.

• Hi, can I change the password for alloracle online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME

  Hello

  can I change the password for "alloracle" online in production? -example - FNDCPASS apps/apps 0 System/Manager ALLORACLE WELCOME

  version: oracle EBS 12.1.3.

  Concerning

  Kumaran S

  Hello Kumaran,

  For security reasons, I would not be advised to do.

  If it's not prod, some customers follow which. But it's sold to the customer.

  However, for the production, it is not recommended.

  Hope this helps!

  Kind regards

  Hugues

• Can be used with ESXi 4.0 HP system management tool?

  Hello

  I'm installing ESXi 4.0 on HP DL380 G4 server and I was wondering if the management of the HP tool system can be installed along side the hypervisor, so I can remotely check the condition of the equipment of the machine.

  Anyone know if this is possible?

  Thank you

  I had little experience with HP SIM, it's been a while. So with ESXi, there is no agent that runs on the host computer, it uses the CIM (Common Interface Management) which is an API that can monitor the hardware and return this information to tell your server HP SIM. For the configuration and use, I recommend looking at HP and the involvement of the HP documents. If you have installed ESXi HP image, then from the point of view host you should be good. You must later have your SIM Server talk to host ESXi and sure he monitors the components you want and alert on it, etc.

  Here are a few articles around ESXi and CIM blog:

  http://blogs.VMware.com/ESXi/2010/04/hardware-health-monitoring-via-CIM.html

  http://blogs.VMware.com/ESXi/2010/05/hardware-health-monitoring-via-CIM-part-2.html

  http://blogs.VMware.com/ESXi/2010/05/hardware-health-monitoring-via-CIM-part-3.html

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• BSOD in Windows 8 memory exception error System & Management Service.

  Dear all,

  I recently bought a lenovo U410 of the United States. I've been using this computer in Germany since the week last in Germany. Over the last week I had to re install OS 8 on my computer. After re-installation, I was often do a lot of memory management & Service Exception BSOD errors. How can I rectify this?
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of WIndows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  
  
  Team Zigzag3143.com  

• Manage snapshots with vMA

  Hello

  Is it possible in which I could manage VM snapshots using vMA? I use the "vmware-cmd" command but I don't see any option for snapshots of the LIST and return to a specific.

  I can't get the command to show me how Boolean If the virtual machine has snapshots, delete them or go back to the last.

  Thanks in advance!

  elgreco81

  Is it possible in which I could manage VM snapshots using vMA? I use the "vmware-cmd" command but I don't see any option for snapshots of the LIST and return to a specific.

  I can't get the command to show me how Boolean If the virtual machine has snapshots, delete them or go back to the last.

  I'm afraid this is the best you can do with what the vMA builtin tools offer, unless you write custom perl scripts using the viperltoolkit (comes with the vMA).

  The vMA was always intended as a sort of CLI of ESX (i) local centralized to manage the hosts and virtual machines through commands supported (esxcfg-* / vicfg-*, esxcli etc.), which are also available on a local host ESX (i); with the advantage that it is centralized and you don't have to enable SSH on your guests every time.

  More advanced things like management of VMS (apart from basic start/stop etc.) must be done through the standard API applications as the vSphere Client (Web) (with vCenter), PowerCLI scripting or other APIs such as the viperltoolkit.

• System management / IP discovery

  Hi all

  I have two questions.

  First: I have a project that is created. Now, I want to change the systems that are in the focus of the project. Can someone tell me where I can do this?

  Second: I have a list of imported servers. Now I want to scan some IP subnets for additional systems. Can someone tell me, how to proceed?

  Thank you very much

  Kind regards

  Dennis

  Dennis Hoff wrote:

  Hi all

  I have two questions.

  First: I have a project that is created. Now, I want to change the systems that are in the focus of the project. Can someone tell me where I can do this?

  Second: I have a list of imported servers. Now I want to scan some IP subnets for additional systems. Can someone tell me, how to proceed?

  Thank you very much

  Kind regards

  Dennis

  I will answer the second part that I just finished an IP based scan CA for a client.

  first-

  Admin-> Options-> tab Jobs

  Expand the task "on-demand - discover.

  Select 'discover' and click on edit (to change the task)

  use edit-> tab tasks-> task to select 'Discover'-> settings button

  -This is the fun part-

  Select 'IP subnets' tab-> add

  Choose to enter via the beach or CIDR class (which I prefer)

  Select what are "well-known" ports you want to search by (I found success with all checked)

  Click on the button 'Add '.

  Rinse/repeat as needed

  Now, if you want to discover in addition to say... 5 subnets, you need to add a double task otherwise that you find the questions I never reduced down. This should be pretty self-explanatory under part of work to change the steps above.

  If you do not want it discover all the servers of advertisements and local LANMAN server, you'll want to disable them here too! I suggest to uncheck:

  'Discover the areas' - under the Active Directory tab

  LAN Manager systems - slot tab discovered node

  Active directory - on the discovery tab node

  That should help you on your way.

• Alias of IOV Distributed System Manager

  Is it possible to see the IOV alias name and the name of the physical channel

  a cRIO channel?  The Project Explorer displays cRIO channels in this way and

  would be nice if the DSM would do that also.  Otherwise if you track down

  a bad transducer on a high lane count module, you will need to list the

  channels in your head.

  One possibility is to look into the following file stored on the cRIO system and extract the information from there.

  C:\NI-RT/config/variables. XML

  This file contains simple XML code, listing all the IOVs in the current configuration of the cRIO system.

  The attached sample project shows how you can read and analyze the information directly on the cRIO system. Of course, you can also copy (FTP) this file to the host and analyzed it.

  Note: Scan Engine Channel Info Plus.vi included in the sample, download its own bitstream on the FPGA to determine which modules of series C are located in the cRIO chassis. So this VI cancels and replaces any current FPGA VI running on the cRIO chassis. Use this VI cautiously because it can cause serious problem in your application due to the interruption of the FPGA.

  This example uses the reference for the CRY component library to retrieve information about cRIO current of the system hardware.

• Install SBS 2008 and Documentation systems management tools

  Hello

  I use the GDPS 5.4 rev A00 drive try to install SBS 2008 on a PowerEdge 2950III server. The process works very well and I chose the server 08 x 64 as the operating system. Once it asks me the disk he thought for a second and shows the following error message;

  Script: C:\remindpopup2.vbs
  Online: 123
  Char: 4
  Error: A device attached to the system does not work.

  Code: 8007001F
  Source: WshShell.Exec

  [OK]

  I found an updated version of the rev A00 5.5 GDPS, but I can only download the last two iso files.

  Is there anyone help any with this problem before I try to call Dell?

  Just remove all mapping for SAN, fixed yesterday 09/12/2012 and remove raid in case if you don't have a SAN, we M610 blade servers

• System management software 1 SALT fullness 0: complete log - say

  Hi all

  We have an old VmWare ESXi 4 in our Organization, no installed vCenter.
  I have two warning messages about to record the ability, screenshot is attached.
  I have access via SSH to the mode of Technical Support, also I can access the files on the server and look for the log file.

  Tried to erase the log as suggested here: VMware KB: alarm of State of The host IPMI system event log is triggered repeatedly in VMware vCenter Server 4.x and 5.x
  But when I run the "localcli material clear salt ipmi" command in SSH connection I get an error: - ash: localcli: not found.
  

  Please help me to clear logs,

  Can I just delete the log file of the server?

  

  So. I figured out how to do this.
  First of all, we must understand it might be logs of server host BIOS or in another case, the partition containing the newspapers may be out of storage.

  • In my case the problem was in the newspapers of IBM server BIOS. I just erased the BIOS of the server host (reboot required) newspapers.
  • Another way to overcome this problem, if it was a partition that lack of space is to point to another, newspapers more large partition.
    This could be done under Configuration > software > advanced settings-> ScratchConfig.

  Hope that helps anyone... I'm not sure that ESXi4 exists somewhere except my company