HP15-G019WM - Running Windows 7 - error in Device Manager
Have an error of yellow triangle on the device for the SM Bus controller Manager.
Hardware ID = PCI\VEN_1022 & DEV_780B & SUBSYS_21F7103C & REV_3A
Hello
Download and install the drivers for the AMD Chipset from the following link.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207
Once the installation is complete, restart the laptop.
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
How can you diagnose errors in Device Manager
Tried installing McAffee, but error message. Contacted McAfee... says the problem is in the Device Manager. How can I determine the error in Device Manager?
Are you sure you don't have another Antivirus always installed; even an expired subscription?
A lot of AVs will not install if they find one already installed (and you must have an AV installed in any case).
Another problem may be how you try to install it:
You need to download and save on the desktop > then right click on the saved files > select run as administrator.
FYI: Here's how to look in the Device Manager:
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
See you soon.
-
Unable to run Windows update, error: 0 x 80070424
Original title: Windows update will not work. I receive [error number: 0 x 80070424]. I am running Windows XP, Media Center Edition, Version 2002, Service Pack 3
Windows Update will not work. I receive [error number: 0 x 80070424]. I am running Windows XP, Media Center Edition, Version 2002, Service Pack 3
Hello
1. you receive this error when you install a particular update?
2. when it changes on the computer prior to this question?
Perform the following methods and check:
Method 1:
Disable the security software on the computer and check.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
See the link, run the Fixit. You can also try other steps provided for in article.
Error message 0 x 80070424 when you use Microsoft Update or Windows Update Web sites to install updates, or when you start Windows Firewall
http://support.Microsoft.com/kb/968002
Note: the above link is also applicable for Windows XP. Ignore method follow the steps in method 2 to 5 troubleshooting 1.
Registry warning
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
Method 3: If the problem persists, perform the steps mentioned below and check:
- Click on Start -> run
- Paste the following command and enter
% SYSTEMROOT%\SYSTEM32\REGSVR32. EXE, % SYSTEMROOT%\SYSTEM32\WUAUENG. DLL
Let us know if it helps.
-
Unable to run windows update error code A 8024, 000
Original title: 8024A 000 error
I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.
Hi all.
solution:
Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version
of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.
This works.
The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.
This driver 11 version solves the problem with windows Update error A 8024, 000.
(have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).
-
Wired controller Xbox 360 connects to Windows 7, error: USB device not recognized
Original title:-wired controller Xbox 360 connects to Windows 7
Hey, I recently bought a controller wired xbox 360. And it does not connect to my PC. When I try to connect it says device not recognized USB. And in Device Manager it says it is an unknown device and that "Windows has stopped this device because it has reported problems. (Code 43) "I downloaded the driver from the software http://www.microsoft.com/hardware/en-us/downloads here and I also downloaded the MotioninJoy as an emulator, but the xbox 360 controller does not always connect." Is there a way to fix this?
Hello
1. did you of recent changes to the system before the show?
2. do you have the receiver for the device to the XBOX?
Method 1: Troubleshoot your XBOX controller.
Follow the steps in troubleshooting from the link below and check if it helps.
http://support.Microsoft.com/kb/908888
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
http://support.Xbox.com/en-us/Xbox-360/troubleshoot/accessories/controllers-remotes
Method 2:
(a) click Start.
(b) access Control Panel, click on System.
(c) click on hardware, click Device Manager.
(d) open Device Manager and expand the devices with error code 43.
(e) right click on the device and Uninstall the device.
(f) restart the computer.
Check to see if that fixes the problem.
If the problem persists, I suggest that you follow the XBOX support link below for assistance.
http://support.Xbox.com/en-us/
In addition, check out the link below and check if it helps.
http://support.Xbox.com/en-us/Xbox-360/troubleshoot/hardware/error-codes
It will be useful.
-
Installation of Adobe met an unexpected failure when you attempt to install the first instance of AdobeAcrobatPro DC. It is the exact error message and seems to be the case for a number of users. I am running Windows 7 and was already able to install Adobe Acrobat Reader DC and have Adobe Flash Player 10 ActiveX installed successfully. It's the exact error message, there is NO error code! It seems as there is no support number to contact Adobe to, and the only way to receive the 'support' is through the forum. PLEASE ANSWER!
Hi tracyes31040766,
If it you please run this tool cleaner Download Adobe Reader and Acrobat cleaning - Adobe Labs tool to remove the old Acrobat, retsrat your system plates & then try to install it again using this link Download Adobe Acrobat free trial | Acrobat Pro DC.
Let me know how it goes.
Kind regards
Nicos
-
ACPI and ACPI DelayMan filter lid display errors in Device Manager
When I open the Device Manager, under system devices these two have errors associated with them.
For ACPI DelayMan filter
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
For ACPI lid
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
How can I solve this... and what are doing?
Well... Right-click on the ACPI lid, then choose uninstall the drivers. Do the same for the DelayMan filter. ACPI lid reinstalls itself after reboot and my DelayMan filter returned as an optional choice among the updates of Windows. I hope this helps.
Oh and I don't know even what delayman filter is actually. As far as I know is that when my ACPI lid had an error, it caused my pc to keep running away when I closed the lid (it doesn't go to sleep or anything over my option "Choose which computer does when the lid is closed" went from wins. Reinstall the driver restored back.
-
Windows XP cannot open Device Manager
Try to install a program and they tell me to open the Device Manager and update driver. When I click on Device Manager, I get an error saying "windows cannot find mmc.exe. What I have to do. Reloading is not an option, I don't have the disk that came with my system. Running Windows XP Media Edition, Version 2002 SP3 Canter. Any help would be great. I can get around but still a novice.Please stay with your original on this problem thread, especially because it has nothing to do with the Windows Update feature: http://social.answers.microsoft.com/Forums/en-US/xpfiles/thread/a39c7185-39a6-4dbf-8558-6f4e53975d21
Thank you
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Drive SD-R6112 are more recognized - 19 Code error in Device Manager
Hello!
I have two lenses (one internal, one external) who suddenly are not recognized. Both are appearing in Device Manager with the same error as follows:
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)After uninstalling and re - install them both several times, including resetting devices still not change state.
Currencies are: DVD-ROM TOSHIBA SD - R6112 (internal)
TSST corp CD/DVGW SH-S182M peripheral USB (external)Both devices worked very well the last time I was on my laptop, 2 days ago.
I guess I have to delete some registry entries, but without details, I'm not going there!
Can someone help me?Thank you very much
Photographer for customers waiting for pictures...
Susan DeFurianniTo my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.
As far as I know Microsoft provides these options of solution:
Click on uninstall and click Scan for hardware changes to load a usable driver.
Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.In addition, you can try to remove the Upperfilters and the LowersFilters of this registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4 D36E965-E325-11CE-BFC1-08002BE10318}If it doesn't help then access Device Manager Reinstalls the channel primary and secondary section ATA/ATAPI IDE controller and reboot.
Good luck and bye
-
Carpet * a DVD 850 s ATA Device (CD player) - Code 19 error in Device Manager
I have a problem in my DVD player, I have * mast * a DVD 850 s ATA Device *, there driver not working anymore. Now Iam not able to run my CD/DVD. Every time I have insert any disc, nothing happens even the DVD drive icon is not there in * computer file. I opened the * Device Manager * and I got this message when I click on properties
* "" Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. " (Code 19) » » *I tried updating the driver but it says "" your driver is up to date "" I don't know what to do...
Please help me! I will be very thankful to you
Thank you
Concerning
FaisalWhat model laptop do you have?
Try to remove the CD/DVD filters in the registry.
When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.(1) run Regedit (start-> Run-> Regedit)
2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
(3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
(4) restart.If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe -
Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager
The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer. The door is not ejected. You must use a paperclip, poking into the hole to open it. I also re - it sitting, but it changed nothing. We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II. Installation failed and it has messed up also the DVD/CD drive.
We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.
The specifications of the laptop are:
HP Pavilion dv7
Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2
4 GB OF RAM
64-bit Windows Vista
Hello
Check with HP Support, their online documentation and drivers, and their known forums
questions.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I can see is more devices in Windows 7 64 bit device manager
I just got a laptop (2.67 GHz quad core i7). It had Windows 7 Pro 64 bit responsible. I tried to clean up some unwanted 'free' software. When I went to the Device Manager to check on a device, nothing was in the window. There are no hidden devices. Everything seems to work, but I don't see all the devices in the window.
Hello
What is the brand and model of the computer?
When you open Device Manager, no devices appear in the list. Instead, a blank window appears.
This problem occurs if the Plug-and-Play service has been disabled (disabled).
Method 1:
To resolve this problem, set the startup type for Plug-and-Play on automatic. To do this, follow these steps:
a. Click Start and run, type services.msc, and then click OK.
b. double-click Plug-and-Play. If you receive a Configuration Manager message, click OK.
c. in the Startup Type list, click Automatic, and thenOK.
d. close Services.
e. restart the computer.
Method 2:
The other reason, Device Manager may be empty is because there are some security issues with the registry key.
Note: serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
a. click on start-> Run-> type regedit.exe.
b. search for the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
c. now right-click on Enum and click Permissions.
d. click on the Add button and type everyone, and then click OK. Check the box allow next to the reading for everyone. Now click on add and enter the system. Check the box allow next to the read and full control to the system.
e. the two check boxes under allow must be selected when you highlight the system. Also be sure to click on the Advanced button after adding the two users and select Reset entry permission on all child objects with the entries displayed here and that apply to child objects. Click OK.
f. restart your computer now and check if the problem persists.
Method 3:
Perform a SFC scan on your computer. Consult the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Hope this information helps. Response with status so that we can help you.
-
After installing WXP Satellite A200 reveals an error in device manager
Hello
I reinstalled my pc with windows XP, but after installation, there is a mistake of the ethernet controller in Device Manager.
Can someone help me find the right driver for this problem?Here is the information from my pc:
SYSTEM
======Host name: THUIS-1
IP address: 127.0.0.1
Username: THUIS-1\
Description:
Operating system: Microsoft Windows XP Professional (5.1.2600 version; build 2600)
Name: Microsoft Windows XP Professional
Version: 5.1.2600
Build: 2600
Install date: 2010-11-03 17:36:37
Service pack: Service Pack 2Model: Satellite A200
BIOS: TOSHIBA (version: V5.20; date: 16/08/2007)
Manufacturer: TOSHIBA
Version: V5.20
Date: 08/16/2007
Serial number: 67195868K
Motherboard: TOSHIBA (ISKAE; version: 1.00)
Manufacturer: TOSHIBA
Product: ISKAE
Version: 1.00
Chassis: Notebook
Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
Manufacturer: GenuineIntel
Max clock speed: 1862 MHz
Architecture: x 86
2: 1 024 KB level cache size
Socket type: U2E1
Version: Model 14, stepping 12
Processor: Genuine Intel(r) CPU T2130 1.86 GHz (architecture: x 86; 1862 MHz)
Name: Genuine Intel(r) CPU T2130 @ 1.86GHz
Manufacturer: GenuineIntel
Max clock speed: 1862 MHz
Architecture: x 86
2: 1 024 KB level cache size
Socket type: U2E1
Version: Model 14, stepping 12
Physical memory: 2.0 GB
Memory: 1.0 GB (Bank 0; form factor: SODIMM; memory type: unknown)
Capacity: 1.0 GB
The device index: M1
Label of the Bank: Bank 0
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed:
Maximum capacity: 3.0 GB
Memory: 1.0 GB (Bank 1; form factor: SODIMM; memory type: unknown)
Capacity: 1.0 GB
The device index: M2
Label of the Bank: Bank 1
Form factor: SODIMM
Memory type: unknown
Manufacturer:
Speed:
Maximum capacity: 3.0 GB
Disk: TOSHIBA MK1637GSX (149,0 GB)
Legend: TOSHIBA MK1637GSX
Size: 149,0 GB
Manufacturer: (Standaardschijfstations)
Interface type: IDE
Media type: fixed the hard drive carrier
Bytes per sector: 512
Heads: 255
Cylinders: 19457
Sectors: 312576705
Other titles: 4961535SOFTWARE
========Atheros Client Utility
Camera Assistant Software for Toshiba, Version: 1.7.147.0628
Geluiddemper (c) cd/dvd-station, Version: 1.00.008
High Definition Audio Driver Package - KB888111, Version: 20040219.000000
Intel(r) Graphics Media Accelerator Driver
Intel (r) PROSet/Wireless Software, Version: 11.01.0000
Marvell Miniport driver, Version: 8.46.4.3
mCore, Version: 9.09.0000
mDrWiFi, Version: 9.09.0000
mHelp, Version: 9.09.0000
mIWA, Version: 9.09.0000
mLogView, Version: 9.09.0000
mMHouse, Version: 9.09.0000
mPfMgr, Version: 9.09.0000
mPfWiz, Version: 9.09.0000
mProSafe, Version: 9.00.0000
mSCfg, Version: 9.09.0000
MSXML 6.0 Parser, Version: 6.00.3883.8
mWlsSafe, Version: 9.00.0000
mZConfig, Version: 9.09.0000
REALTEK GbE & FE Ethernet PCI-E NIC Driver, Version: 1.26.0000
Realtek High Definition Audio Driver, Version: 5.10.0.5464
Texas Instruments PCIxx21 / x 515/xx12 drivers., Version: 2.00.0001
TOSHIBA Accessibility, Version: 0.49.2.1C
TOSHIBA ConfigFree, Version: 5.90.07
Modem TOSHIBA Software, Version: 2.1.77 (SM2177ALD04)
TOSHIBA Supervisorwachtwoord, Version: 0.49.2.1C
TOSHIBA-zoomutility, Version: 2.00.00.24cPROCESS
=========ACS.exe (C:\WINDOWS\system32\acs.exe)
ACU.exe (C:\Program Files\Atheros\ACU.exe)
agrsmsvc.exe (C:\WINDOWS\system32\agrsmsvc.exe)
CFSServ.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSServ.exe)
CFSvcs.exe (C:\Program Files\TOSHIBA\ConfigFree\CFSvcs.exe)
Ctfmon.exe (C:\WINDOWS\system32\ctfmon.exe)
EvtEng.exe (C:\Program Files\Intel\Wireless\Bin\EvtEng.exe)
Explorer.exe (C:\WINDOWS\Explorer.EXE)
freepcaudit.exe (F:\freepcaudit.exe)
Hkcmd.exe (C:\WINDOWS\system32\hkcmd.exe)
iFrmewrk.exe (C:\Program Files\Intel\Wireless\Bin\ifrmewrk.exe)
igfxpers.exe (C:\WINDOWS\system32\igfxpers.exe)
igfxsrvc.exe (C:\WINDOWS\system32\igfxsrvc.exe)
igfxtray.exe (C:\WINDOWS\system32\igfxtray.exe)
Lsass.exe (C:\WINDOWS\system32\lsass.exe)
RegSrvc.exe (C:\Program Files\Intel\Wireless\Bin\RegSrvc.exe)
RTHDCPL.exe (C:\WINDOWS\RTHDCPL. (EXE)
Rundll32.exe (C:\WINDOWS\system32\rundll32.exe)
S24evmon.exe (C:\Program Files\Intel\Wireless\Bin\S24EvMon.exe)
services.exe (C:\WINDOWS\system32\services.exe)
SmoothView.exe (C:\Program Files\TOSHIBA\TOSHIBA-zoomutility\SmoothView.exe)
Smss.exe (C:\WINDOWS\System32\smss.exe)
Spoolsv.exe (C:\WINDOWS\system32\spoolsv.exe)
Svchost.exe (C:\WINDOWS\system32\svchost.exe)
Svchost.exe (C:\WINDOWS\System32\svchost.exe)
TCtrlIOHook.exe (C:\WINDOWS\system32\TCtrlIOHook.exe)
TOSCDSPD.exe (C:\Program Files\TOSHIBA\TOSCDSPD\toscdspd.exe)
traybar.exe (C:\Program Camera Assistant Software for Toshiba\traybar.exe)
Winlogon.exe (C:\WINDOWS\system32\winlogon.exe)
wscntfy.exe (C:\WINDOWS\system32\wscntfy.exe)
ZCfgSvc.exe (C:\Program Files\Intel\Wireless\bin\ZCfgSvc.exe)
ZoomingHook.exe (C:\WINDOWS\system32\ZoomingHook.exe)I hope someone can help me!
GR
Go to the download page of Toshiba in http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp and search drivers for Satellite A200 PSAE0E.
I can see driver LAN WXP is there and it is version 5.664.205.2007.
Can you please install and see what happens? -
What I have
Xbox 360 Wireless Controller (with the cable that allows you to connect it to the photo that is wired)This my problem
I connected the Xbox 360 controller to my pc via the cable, it is detected in Device Manager as 'wireless controller xbox 360 Via play & charge kit.
In respect of game controller does not appear even when you click advance to selected the device it does not always show upward.
I tried to use it TI a game it does not at all.
The rings on the Xbox 360 controller lights when I plug the controller in my pc (even though Device Manager detects a problem with)
When I press the button the controller guide, it just keeps blinking as if it must be syc (but it connect through a wire that shouldn't happen)I tired using different drivers the same problems, I was installed the drivers off Windows 7 support site exactly the same problem...
I also tried unplugging all the USB devices on my computer and plug the controller Xbox 360 on USB port which are directly mounted on the mother exactly the same problem.
Up to now NO solution.
Please help me because I think I got tired of everything I canUnfortunately, this won't work. The Play and Charge kit connects only up to the actual battery. Still, the controller connects more wireless.
You would need a wired Xbox 360 controller or Xbox 360 Wireless Gaming receiver that connects to your wireless controller existing.
-
I bought the HP ay503tx model that came with the BACK. I downloaded windows 7 x 64 ISO and I got the license with me original. But when I try to install windows 7 via USB it won't let me.
After the boot from USB, it get up to page that says that windows install. and when I press install, it throws an error 'no driver device found ". I can't see any HARD disk where to install fresh windows.
I saw a lot of solutions such as if we were trying on USB 3.0 etc, but nothing helped. Please help me.
Hello:
On the PC with the Intel Skylake chipset like yours, there is no support USB2 and the W7 installation media has no the USB3 support, so you are between a rock and a hard place.
The solution that works for most is to use the tool below to integrate the drivers USB 3 of your installation drive of W7 USB flash media.
There are instructions in the readme on the link below to learn how to use the tool. It should be run on a PC with W8.1 or W10.
https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility
Maybe you are looking for
-
A few questions about iCloud backup
-If I backup my data to iCloud from an Iphone (iMessage, SMS, calls, Whatsapp story) and then attempt to restore this backup on a new iPhone with a SIM card different, using the same iCloud account, he would restore the history of calls, SMS, history
-
Return of dynamic loading vi loses focus
Following the example of NI Loader.vi dynamic, my vi charge, runs and returns properly. Howerver, when you use the same code to call from my main program, vi of the same load and runs, but in return, emphasis is not on the original vi. A click of t
-
Is it possible that I can clear my history of reliability?
-
My computer tells me that the USB is not recognized. It says "windows has stopped this device because it has reported problems" code 43. My mouse is a retractable laser mouse mini Toshiba, model PA3569 number. I tried a different mouse and I can't
-
Mixture of blackBerry software does not
So far, I have been successfully using mixture. Today, I am unable to use it as the hub shows that there is no message today and it seems as if it s trying to load. On further investigation I can go in my e-mail accounts and that they are responsible