HP5180 scanning with missing cartridge

Similar Questions

• Photosmart c8100 - scanning without ink cartridges

  Is it possible to use the scanner without ink or with empty cartridges cartridges.

  I don't use it for printing but I would still use it as a scanner.

  Hello

  Suppliers (all) should allow printers scan ONLY without necessity of inks. Unfortunately the way they work now: they will stop working during the warming up/verification of the process when no inks or missing ink because firstly, they are printers.

  Kind regards.

• Scan without cleaning cartridge

  I use a HP Photosmart 6510 and do a lot of scanning, but prefer not to waste ink everytime I turn on the printer.  Any ideas?

  Hello

  Until there is a scanner, a printer is therefore inks during the warm-up. A single scanner requires no inks. My test says it can scan with empty ink cartridges, BUT the cartridgs has to be there.

  Hope it makes sense.

• Photosmart Pro B9180: Exhausted ink with new cartridge message

  I had 2 showing depleted, inks Light Cyan and Magenta, so I replaced them both.  After a bit of memorization and re - insert, I managed finally to get the LC to be accepted, but kept showing Magenta empty ink Replace cartridge. Finally I managed to get the printer to accept the cartridge by removing the yellow and magenta and the closing door ink cartridge so this printer it has advised both cartridges where either missing or damaged. I then re inserted the Magenta cartridge and closed the door and waited for the error message about the yellow show and then re-inserted cartridge yellow. The printer then went to the ready state. Hurrah! After a print test sheet and a couple of head cleans and then some photos on plain paper I tried to print on photo paper. At half way through printing the machine stopped and threw the message for the Magenta cartridge is exhausted. I cheated once again the printer twice to remove the yellow and magenta cartridge and put back as before. It has managed to get at the end of printing, which indicated that the heads remain a pure which I proceeded to do. Unfortunately the printer cannot again print throwing up the message that the Magenta cartridge was exhausted and needed replacement.

  After doing a lot of research online, it seems it is a common problem, but what I failed to find are solutions even on the HP forum.

  Is this a problem with the cartridge having questionable chips? Is this a problem with the printer, chiefs or general design?

  I really need an answer that will prevent me from buying inks Dungeon I am wasting money. I have tried all resets as described in other posts here. Unfortunately once the exhausted ink message nothing different pose can be done as the printer all crashes.

  Does anyone have a solution to this problem?

  Hello Jabzi,

  an update on printer problems. Following your last message, that the printer has again stopped work while I followed your advice and tell me the magenta was exhausted that I knew, that it could not be. In any case, I decided that the cartridge must be defective, so I ordered a new one. The next day, waiting to get to the printer, I let on, ran his daily routine of maintenance and the problem corrected itself, is great. I ran a few prints which still showed heavy bands/bad colors, so I ran routines cleaning and alignment that has made the problem worse. What I noticed, is that the banding seemed to be linked to black ink and there are large gaps in the text. I changed the black photo that has been reading about 25% full I had read a similar post where someone had problems with a low black cartridge. I also pulled the print heads and thouroghly them cleaned manually. The two black print heads showed signs of ink muddy accumulate but color heads everything looked very clean. After cleaning and reinserting the heads the printer ran his routine alingment and produces best alignment prints that I had. I then printed the test page, was also excellent showing no missing text and three print heads that fell in fair condition were now show as good. Since then I've produced great prints.

  That I summise from all this is that the problems seem to have stems printheads being blocked preventing ink flow and giving messages erroneous re cartridges is exhausted. Everything that was probably due to the printer being unused and left off for an extended period. Once the heads had been cleaned and enough ink has flowed to purge the ink heads has been lying in it for a period the printer was able to function properly.  At least I now have a spare cartridge magenta on-site as well as a printer to work.

  I hope it's useful to anyone having similar problems.

  Thanks for your help

  Concerning

  Alan

• Scanning with Mac desk jet F2235 all-in-one

  Hello! I inherited this all-in-one deskjet. I have a Mac with OS X air 10.7.5, connected the printer directly to it. As usual, she immediately identified software and used (this time for 2000 series printers). His print perfectly. BUT it is not the scanner. If I press the button scan in the printer flashes some time and nothing happens. And in the mac driver it doesn't seem to be a facility for scanning, only for printing. The scanner itself does not work. I have chenged the cartridges and he asked to scan the Kaleidoscope page and it worked. It also analyzes to make copies.

  I appreciate any help! I need to analyze something urgently! As it has been so well printing, I assumed sweeping would simply be too easy. Thank you!

  Welcome to the @ManaCamacho forums.

  I read your post about scanning with your Deskjet F2235 and Mac OS X 10.7.5. As you have noticed, there are no drivers available for your printer with 10.7 model, i.e. There is no software of scans included (Deskjet F2235 drivers).

  However, this link can help you analyze without using HP software: Deskjet F2235 and Mac OS X 10.7

  Some information of the 10.8 Guide can help out too: how Scan: 10.8

  Have a wonderful Wednesday

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• After the update to firefox 17.0 when I do a scan with Norton 360 it does not pick up the tracking cookies which changed 16.0.02

  After the update to firefox 17.0 when I do a scan with Norton 360, it is no longer captures the rejected. These cookies that have been picked up with firefox 16.0.02 what you have changed? Plus, I'm getting sick of these updates - at least we tell users what has changed in new versions.

  First of all, we do not say what has changed in each version, http://www.mozilla.org/en-US/firefox/17.0/releasenotes/.

  Secondly, Norton should always be able to delete your cookies (just so that you know that the cookies are generally harmless, and you don't need to worry to remove). If not, you can delete the cookies in Firefox Cookies - Information that Web sites store on your computer

• Can't scan with HP LaserJet MFP M127fw Pro

  I have installed the printer driver and tried to follow the instructions in the manual to scan a document.  When I find my printer folder in the start menu/all programs, there is no option to scan. Help!

  Hi @3Digit .

  I see that you are having problems of analysis, it is not any scanner in the HP folder software. I would like to help you today.

  Open the HP scanning with one of the following methods:

• OfficeJet 8730: Scanning Resolution maximum of scanning with ADF for OfficeJet 8730/40 models

  I found that the reolution max for scanning with the ADF for the 8720 model is 300 dpi.

  The question is whether this limitation is also on 8730/40 models?

  Hello
  
  Thank you for using the HP Forums.

  This post will explain the limitation.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/quot-add-scan-pages-quot-for-resolution-up-to-300dpi-only/TD-p/5371575

  In addition, this resource will show or how to set high resolution:

  Create a shortcut to scan and scans high-resolution (HP Officejet Pro AiO 8700 series)

  Hope that helps!

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Scanning with HP Scanjet N6310

  I have a HP Scanjet N6310, which is connected to my end 2011 MacBook Pro running Mountain Lion. Although the scanner works well, the size of file for each analysis is ridiculously high. A scan of a page of a document is greater than 4.5 MB. When I took the same page to scan with the copier to my office, the size of the scanned page was only 50 KB. The file size of the document scanned with my scanner is ALMOST 100 x larger than the size of the file of the same document scanned at work. I checked my settings and have the preset on 'document' and not 'pictures', 'slides' or 'negative '. Something must be wrong here. Any ideas?

  That did not work. Also, I resumed repair disk permissions and I got this:

  WARNING: SUID 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAgent' file has been modified and will not be repaired.

  I don't know what that means or how to fix, but I think I may need to uninstall and reinstall my printer and scanner drivers.

  If Yes, I think that these drivers I need to install (which include the two that you referred me to in your previous post):

  1) ICA Software: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15179&prodSeriesId=3723469&prodNameId=3723537&swEnvOID=219&swLang=8&mode=2&taskId=135&swItem=cs-112996-1

  (2) HP printer drivers: http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

  (3) HP full software functionality: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3723537&prodTypeId=15179&prodSeriesId=3723469&swLang=8&taskId=135&swEnvOID=219

  I also think this page to propose appropriate measures, but I'm not sure: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03428470#c02917078_UpgradeToOsX10.7

  Also should I install (and then reinstall) the software for my HP LaserJet CM2320? I don't know, but the last link suggest that all drivers must be uninstalled before you download the drivers.

  Thanks again.

• HP Photo Smart D5110 will not scan with Mac OS 10.9

  Help. I've looked everywhere and can't always come up with a solution to scan from my Photosmart. Worked fine until I upgraded to Maverick. Thank you!

  WelchSHello and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are looking in your scanning options. I would try to help.

  Due to the age of the printer, there is no HP software for this printer on Mavericks.  You can, however, use the characters of basic Mac OS and drivers to scan.  I'm including a document on the installation and using the printer on a Macthat should help you to solve this particular section of the document titled "How to scan with Apple software update driver?"

  Please let me know if you have any questions.  Thanks for posting on the HP Forums!

• Not able to scan with my printer [Krishna]

  Hello

  I am not able to scan with my printer.

  Model No.: P3010

  Serial No.: P3015d

  If you have a HP Laserjet P3010 is a printer function and it has not any ability to scan.