I can't find other devices on my network.
I use a WNDR3700x2 router with a wireless on another floor extension. When I connect to the router itself, I can see all of our devices, wired and wireless. I also downloaded the netgear genius app, and they appear there, too. The problem is that my devices cannot communicate with each other and do not lie when I display the networks on the devices themselves. All computers are running Win 10 and wired and wireless internet access works great. Through files and printers sharing, I managed to get a wireless laptop to talk to a desktop computer, but by the Wireless Office, too. The files are now accessible by computers, but the laptop does not see the printer that is hard wired to the desktop. (Before 10th of Windows, wireless computer could talk to another computer when it is wired - that no longer works.) I am also unable to see desktop computers from another computer wired or wireless laptop.
I think I'm being stupid here, but I'm tired of banging my head against the wall... I read another post on this subject, where the global address list should restart router sound every morning for its computers to see each other. This is not the case in my question; restarting changes nothing, and the router connection shows all the devices - I can't get them to see through computers.
Thank you, Elaine! For some reason, using the genius of Netgear has allowed these computers to communicate again. It has no sense to me why it would change anything, but it did, and now all computers communicate with each other. Intermittent problems with the printer, but still believe it has anything to do with its time-out settings.
Tags: Netgear
Similar Questions
-
MacBook can not find bluetooth devices
I just bought a new Macbook. He can not find bluetooth devices. The device is fully charged and so forth. He saw the mouse for a fraction of a second, but then he fell. I tried other bluetooth devices. It does not find.
I had this problem too, turn on the Macbook and off is your best bet. But if this does not work, you can go into the settings of your macbook. Settings - Bluetooth - advanced and ensuring that all things have been checked. Hope this helps, good luck to you.
~ Michael M
-
M40X-309: I can not find wireless device in Device Manager
As soon as I bought my M40X-309, I've updated for Win XP Pro. Everything works well, but I can't use my wireless device.
I can't find the Device Manager, it shows only one network device (other than 'real').
When I tried to change his player windows keep watching, but has not found the right driver.
I tried to install the driver intel driver atheros (I don't know which is the right one), but the unit still apears as "?" and does not work.
Can someone help me? Thank you
Hello
This device was shipped with an Intel 2200bg WLan minPCI.
In this case, you need a driver for Intel. Visit the Web from Toshiba or you download the driver from the Intel site. -
Whenever I click on bluetooth settings he throws me on the parameters of laptop and can not find the device that is a forum... Help, please
Hello Joseph,.
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
You did it all change software on your computer before the show?
Thank you for details on the issue.
This problem can occur either because of corrupt device drivers or incorrect device settings.
I would suggest trying the following methods and check if it helps.
Method 1:
Run the hardware and devices Troubleshooter and check. Please follow these steps:a. press Windows + C keys and click on research.
b. type Troubleshooting in the search box, click on it in the search results.
c. click 'show all' and then click 'hardware and devices'.
d. click on 'Next' and follow the on-screen instructions.If this does not help, use method 2.
Method 2:
Please use the suggestions in this article and check the issue.
Reference:
Why isn't Windows find my Bluetooth or other wireless device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceI hope this information helps.
Please let us know if you need more help.
Thank you
-
I've recently updated to the new ITunes and now I can't find my devices to change the content. What I do have I missed something?
Not clear about your problem...
If you mean that iTunes does not recognize your device, follow these troubleshooting steps:
If iTunes does not recognize your iPhone, iPad or iPod - Apple Support
If you mean that you don't know how to go your peripheral vision, see the screenshot below.
-
New drivers Conextant Audio can not find audio devices
I have a lenovo u410 and when I updated to windows 8.1 like many people my home dolby cinema did not work.
So, I tried to find the answer and fix it myself. I uninstalled all audio drivers and downloadled then the new but when I try to install it "can not find the device" I don't get any audio from my laptop and I don't know what to do.
I'm confused, I have two audio drivers in my drives C: and D: (D: is a SSD) Please help I really like this laptop but I had a number of problems with it.
And now that the fixed so I appriciate the help, but I don't really know what happened that makes get fixed haha
Solid_Curver thanks, I am always impressed by the lenovos customer service
-
Basically, the issue I'm having is that my laptop does not connect to any other computer to access the actions or other files. Other computers on the network can access my computer laptop shares and files without any problems. Operating system is Windows 7 Home Premium x 64.
What I tried:
restarted
uninstalling and reinstalling the files and printers, sharing maps and restart after completion
all disabled firewall
tried with IPv6 enabled and disabled without change, so it is currently enabled
tried on a Wi - Fi and the differences are listed below in the section work (work is wireless)
able to ping other comptuers
access to other computers is permitted by other computersproblem extends over several networks, IE I noticed it at home last night and the followed problem my laptop at work this morning.
The problem is slightly different on the two sites.At home:
I can see the other computers on the network, but I am unable to access it, even if I have permission, but other computers can access to my laptop.At work:
Cannot even find other computers on the network but they can find and access my laptop.I have worked on this problem of non stop for several hours and did much more than what is said, but I am unable to remember everything. I should have been taking notes: P
Here are the results of the ipconfig/all command (I removed the physical addresses for security reasons):
Windows IP configuration
Name of the host...: Radiation-G72
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Wireless Network Connection 2 wireless LAN adapter:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft Virtual WiFi Miniport adapt
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: YesEthernet connection to the Local network card:
State of the media...: Media disconnected
The connection-specific DNS suffix. : hsd1.ga.comcast.net.
Description...: Realtek PCIe GBE Family Controller
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: YesWireless network connection Wireless LAN adapter:
The connection-specific DNS suffix. :
... Description: Atheros AR928X Wireless Network adapt
Physical address.... : **
DHCP active...: Yes
Autoconfiguration enabled...: Yes
Address IPv6 local link...: fe80::f4e3:cd1c:6952:eb4d % 11 (Preferred)
IPv4 address: 192.168.2.7 (Preferred)
... Subnet mask: 255.255.255.0.
Lease obtained...: Thursday, February 4, 2010 10:50:32
End of the lease...: Friday, February 5, 2010 08:29:36
... Default gateway. : 192.168.2.1.
DHCP server...: 192.168.2.1.
DHCPv6 IOOKING...: 234890707
DHCPv6 DUID customer...: 00-01-00-01-12-4C-6E-91-00-25-D3-3D-FC-9A
DNS servers...: 192.168.2.1.
NetBIOS over TCP/IP...: enabledTunnel adapter isatap. {1797D168-6FC8-4DDF-8338-4E214119C26D}:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft ISATAP adapter
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesCard tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: Yes
IPv6 address: 2001:0:4137:9e74:4ea:2920:b81a:cdc5 (Preferred)
Address IPv6 local link...: fe80::4ea:2920:b81a:cdc5% 13 (Preferred)
... Default gateway. : ::
NetBIOS over TCP/IP...: disabledCard adapt 6TO4 tunnel:
State of the media...: Media disconnected
The connection-specific DNS suffix. :
... Description: Microsoft 6to4 card
Physical address.... : 00-00-00-00-00-00-00-E0
DHCP active...: No.
Autoconfiguration enabled...: YesAsked this question in the Windows 7 forum also because the problem was between windows 7 and Vista.
Hello
If it has started, you can try a system restore - an update "might" have caused the problem.
1. try a system restore back to a point before that happened. And immediately thereafter enter
Control Panel - Windows updates - top left settings and set it to download and informs you instead
Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
and let this value - manually search for drivers when you think you need. (See how and why to)
stop day of drivers below.)How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTo uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
Updates installed - uninstallI had completely forgotten the system restore! While looking into the system restore, I found that when I moved into my new House and has cable Internet installed, the cable technology installed a program of comcast on my computer. This caused me to not be able to connect with other computers. After rolling back to install it before it works! Thank you.
-
Where can I find a device driver for a HP Deskjet 3630?
* Original title: HP Deskjet 3630
where can I find a device driver for a HP Deskjet 3630
-
Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G
Windows 7 can not find a device driver for my Bluetooth compatible iPhone 3G
Click Start > devices and printers > add a device, make sure that Bluetooth is turned on. For additional help, see the following link:
http://www.Apple.com/support/iPhone/ http://www.activewin.com http://adacosta.spaces.live.com Andre Da Costa -
Cannot enable the streaming media to other devices on my network?
When I try to install Media Streaming on Win 7 Home Premium 64 - bit, using Control Panel/Network Sharing Center/Media Streaming Options, I find the following strange problem. The "show devices on:" drop-down list has no content and does not allow me to select anything. On my Win 7 wife's computer, this dropdown allows of me selcet is "all networks" or "local networks". I discovered this error when I bought an XBox 360 and setup of Windows media Center on it. Windows Media center on the XBox can connect to my PC and play all the music in my library of music through Media Center, but the XBox can't find my pc on the network using the music library or picture library. My PC does not list the XBox when I "see the network computers or devices", but nor does my wife's PC.
I am confused as to how my XBox has been so easily connected to my PC and continues to work perfectly in the application of the XBox, Windows Media Center, and still fails to find my PC or browse its contents through its other music/photo/media applications.
I have no problem connecting to XBox Live or on the internet.
Any ideas?
Hello
Follow the steps described in the links below: reading your media to devices and computers using Windows Media Player: http://windows.microsoft.com/en-US/windows7/Stream-your-media-to-devices-and-computers-using-Windows-Media-Player
Change settings for streaming media in Windows Media Player: http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player
Also, you can try to temporarily disable anti-virus and check if you can get the opportunity to play and play on your Play Station 3.
Share you must have under 'Network and Internet' a 'homegroup' set in place with share pictures etc. with controlled devices. You must also have under 'Network and Media Center' 'share with media devices' network Local set to "allow all". You can easily access these via WMP12, if you look under the drop down menu "share", it's the two base units, just select those to go to the relative Panel.
All the media you want to share must be stored in the folder 'Libraries' relative to the topic. For some reason, videos are available to select the "folders" on the PS3, if you select 'All videos' only the recorded TV shows samples sample wtv file, which
It will be useful.
-
LaserJet Pro M127fn Installer cannot find the device on the network
Hello
I just bought the product, but during the installation - setup is unable to find the device on the network. Device is properly registered to the address 192.168.0.14 (with static IP address), I can see the dashboard configiration at the same address via browser and all works well with the network itself.
Try to ping the IP - it's ok. Tried to install without active firewall - also fails.
Double checked the installation process - with automatic search and provide the IP address of the printer - both failed.
Also, I rebooted the router and the switch and the computer. Is not new. I also tried downloading the last executable configuration on the site - and even once, it fails with 'device not found on the network.
Then what do I do to fix this?
Thank you
Finally found a solution. It is strange as it may seem, but after all, it's a solution.
-Rinse your DNS and your ARP cache (see the Google if you don't know what that means)
-Reboot the router (or, where appropriate - switches)
-Change the IP address of the device on your network. Try with round numbers like (192.168.0.20)
-Restart your router (and if applicable - switches)
-Restart your computer (s)
-Don't run the Setup again and the hoprefully you will have no errors and everything works perfectly for you
If your problem, similar to mine, persists, repeat the above process again and again... and again...
Good luck
-
Find the device on the network
Could someone please explain to me how to find a device on a network - use the multicast or broadcast?
I want to find the ip address of my server on wlan and there may be multiple instances of these servers. The server uses this http://www.blackberry.com/developers/docs/7.0.0api/net/rim/device/api/io/MulticastDatagramConnection... class and receives repsonses ok. Java then sends a rear channel.
I get only the following c ++ side while I'm hoping to receive a string any (that im sending java) so I can identify what responses come from my server. and which are not.
M-SEARCH * HTTP/1.1
HOST: 239.255.255.250:1900
St:urn:schemas - upnp - org:device:InternetGatewayDevice:1
MAN: "" ssdp: discover ""
MX:3And here is my code to send and receive...
int receiveMulti() { struct sockaddr_in addr; int fd, nbytes,addrlen; struct ip_mreq mreq; char msgbuf[1024]; u_int yes=1; /*** MODIFICATION TO ORIGINAL */ /* create what looks like an ordinary UDP socket */ if ((fd=socket(AF_INET,SOCK_DGRAM,0)) < 0) { perror("socket"); exit(1); } /**** MODIFICATION TO ORIGINAL */ /* allow multiple sockets to use the same PORT number */ if (setsockopt(fd,SOL_SOCKET,SO_REUSEADDR,&yes,sizeof(yes)) < 0) { perror("Reusing ADDR failed"); exit(1); } /*** END OF MODIFICATION TO ORIGINAL */ /* set up destination address */ memset(&addr,0,sizeof(addr)); addr.sin_family=AF_INET; addr.sin_addr.s_addr=htonl(INADDR_ANY); /* N.B.: differs from sender */ addr.sin_port=htons(1900); /* bind to receive address */ if (bind(fd,(struct sockaddr *) &addr,sizeof(addr)) < 0) { perror("bind"); exit(1); } /* use setsockopt() to request that the kernel join a multicast group */ mreq.imr_multiaddr.s_addr=inet_addr("239.255.255.250"); mreq.imr_interface.s_addr=htonl(INADDR_ANY); if (setsockopt(fd,IPPROTO_IP,IP_ADD_MEMBERSHIP,&mreq,sizeof(mreq)) < 0) { perror("setsockopt"); exit(1); } printf("beforeread"); fflush(stdout); bool keepGoing = true; int count = 0; /* now just enter a read-print loop */ while (keepGoing) { count++; addrlen=sizeof(addr); if ((nbytes=recvfrom(fd,msgbuf,1024,0, (struct sockaddr *) &addr,(socklen_t*)&addrlen)) < 0) { perror("recvfrom"); exit(1); } msgbuf[nbytes] = '\0'; printf("received: %d %s", nbytes, msgbuf); fflush(stdout); if(count > 5) { break; } } } int sendMulti () { struct sockaddr_in addr; int fd, cnt; struct ip_mreq mreq; char *message="83383329092240912"; /* create what looks like an ordinary UDP socket */ if ((fd=socket(AF_INET,SOCK_DGRAM,0)) < 0) { perror("socket"); exit(1); } /* set up destination address */ memset(&addr,0,sizeof(addr)); addr.sin_family=AF_INET; addr.sin_addr.s_addr=inet_addr("239.255.255.250"); addr.sin_port=htons(1900); /* now just sendto() our destination! */ // while (1) { if (sendto(fd,message,sizeof(message),0,(struct sockaddr *) &addr, sizeof(addr)) < 0) { perror("sendto"); exit(1); } sleep(1); } }
tjhanks.
It turns out that my hypothesis the code example I used sends the group with this line of code is incorrect...
String remoteAddr = dgram.getAddress(); String msg = "Hi"; dgram = conn.newDatagram( msg.getBytes(), msg.length(), remoteAddr);
remoteAddr gives me //192.168.0.5:65228;4321| rear UDP I used to send the data back to c ++ but when I just changed my group address and port manaually packets are received on the side of c ++.
-
Original title: no network card
I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.
-
I've just updated to iTunes 12.4 on my mac under OS X 10.11.4 and cannot find my device from iTunes.
The device, I am trying to connect is an iPhone running iOS 9.3.2 6.
I'm doing something wrong or should I go back to an earlier version of iTunes?
iTunes should be able to connect to your iPhone regardless of his version, I'm under 12.4 as well and everything works perfectly. Your USB cable + iPhone connect to iTunes on other computers?
If not, I think that your either your USB connector or your port of lightning can be damaged or dusty.
If Yes, then we are dealing with a problem of software on your Mac (please reply if this is the case).
-
Can not find the device adapter Inspiron 1515
Thanks in advance. I reformatted my computer a virus. Now, I can't connect to the Internet... "Windowns can't find any network." When I try to install the Mini PCI card half Dell Wireless WLAN 1515, the process fails and a popup indicating that the 1515 peripheral adapter could not be found. I reinstalled the other drivers, just having problems with this one. Thank you!
Hi jasongarvey,
I suggest you have a look at the response by Umesh P, from the following link:
Adapter Dell Wireless 1515 device not found
I hope this helps.
Maybe you are looking for
-
Smart album in the new Photo app
Hello! Could you please advice how to create a smart album and move all my photos if they have never been sorted in other albums? In this way, I'm trying to remove my trash photos.
-
Qosmio X 770 107 PSBY5E Bios2.10 2nd SATA3 is there? + sudden closures
History of fails:After 2 years, the second HARD drive (not hybrid) makes noises and died a week later. System on C: (Master HDD) worked well (always originally pre installed one of the factory).I decided to switch to a 500gig SSD Samsung Evo 840 by c
-
Crash LV2013 (Edit / of the image into the Clipboard)
Hello Try "Inport image to the Clipboard" with the attached photo (gif) for me, LV2013 crashes. Can someone try and confirm this behavior? is this a bug? Thank you
-
I have a laptop with built-in wifi, but I can not connect my games console nintendo dsi lite
can I get connected my dsi console through my laptop which has built in wifi any advice would be great ty.
-
Difficulty with the Assistant of Vision 2009
Hello. When I try to execute the Vision Assistant it says my screen resolution is wrong and after I click OK it just closes. My screen resolution is 1920 x 1080, so it should be good? I use the 64 bit version of Windows 7. I asked the support of