I did ' sfc/scannow' and that's what I got

Similar Questions

• Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  All this began after Microsoft security essentials did an update in February.

  Hello

  Method 1

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you perform the disk check and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  hope this helps,

• I recently did a pc and that windows 7 but I don't know which version to buy

  I recently did a pc and that windows 7 but I don't know which version to buy for example oem version

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  If you decide to go with a commercial version, you will need the license of full version. You cannot use a version upgrade on a blank partition:

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  If you decide to go with the OEM System Builder License:

  Microsoft Windows 7 Home Premium 64-bit 1-Pack for System Builders ...

  Microsoft Windows 7 Professional 64-bit 1-Pack for System Builders ...

  Microsoft Windows 7 Ultimate 64-bit 1-Pack for System Builders - OEM

• My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

  My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

  a quick search brings us to recent threads = the essential so that "SSD or related connection.

  https://www.Google.com/search?q=4HDD%2F11%2F40000000+SATA+%280%2C0%29+site%3Aapple.com& ie = utf - 8 & oe = utf - 8 #q = 4HDD/11/40000...

  Mac Laptops: Apple Hardware Test may report alert 'HDD' - Apple Support

  ...

  ... If the message in addition to the other problems related to the drive to solid state (SSD) or Flash storage disk, go to an Apple Retail Store or contact Apple's Service Providerwith the computer.

  ...

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• sfc / scannow and service pack 3

  I have Windows XP Pro. Media Center 2005

  I ran sfc/scannow, made using my drive installation, and while he was doing everything he's supposed to do, this message kept appearing again and again. to fix a Windows File Protection error message.

  Ok. THX.  I did exactly what you suggested. But as scannow was running, he kept asking for:

  Files that are required for Windows to run correctly must be copied into the DLL Cache.

  Insert your Windows XP Professional Service Pack 3 disc now.

  Choices: Retry more information Cancel

  PROBLEM: Service Pack 3 has been a WINDOWS UPDATE DOWNLOAD.

  What should I do now?

  See: http://support.microsoft.com/kb/900910

  Even though it States SP2 if should give you clues on how to change the registry to point to the Service Pack files.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• new laptop WMP does not done sfc/scannow and it had not been violated

  I just got this laptop barely two weeks played WMP and had it pinned to the taskbar, but I have this marking, then evil. In properties it says that the device was working properly. says that all diagnostic tools was fine, the sfc/scannow in the prompt doesn't say there is no violation I tried system restore, but doesn't seem to help don't know more

  Hello

  1. What is the problem exactly are you facing Windows Media Player?

  2. what version of operating system do you use?

  3. are you able to open WMP?

  4. have you made changes on the computer before this problem?

  5. do you get an error message? If Yes, what is the exact full error message?

  Follow the methods below:

  Method 1:

  You can try to run the Windows Media Player settings Troubleshooter and check if this solves the problem. Check out the following link to do the same thing:

  Open the troubleshooter in the Windows Media Player settings.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Disable and re-enable Windows Media Player of "turn windows features on or off".

  Features on or off Windows activate: http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

   

  Hope the above information is helpful.

• I tried running sfc/scannow and it does not - it keeps asking me for a CD and my CD in the CD tray

  I am running XP Pro SP3.  I had to buy a Windows Genuine Advantage XP SP2 CD 3 years agao, because I bought a computer with an invalid CD... He was surprised when I ran the WGA tool. I ran sfc/cannow tool, but when I insert my CD of XP WGA (including SP2), I am invited to a different CD. Now, I get errors in my log window update such as:

  09/10/03 12:25:18:289 1360 f54 Agent WARNING: is not Installable rule, updateId = {A11FFEA5-BFFC-43E1-9A02-99970CC142C8}.101, hr = 8004100E
  2010-09-03 12:25:18:360 1360 f54 Agent WARNING: is not Installable rule, updateId = {AFAFB0D2-064F-4B3B-A5F6-8FEB0BFAB287}.100, hr = 8004100E
  2010-09-03 12:25:18:440 1360 f54 Agent WARNING: is not Installable rule, updateId = {0418B8A1-016E-4BA9-9688-5E0BE64CA97B}.100, hr = 8004100E
  2010-09-03 12:25:18:600 1360 f54 Agent WARNING: is not Installable rule, updateId = {BC19109A-8D10-4CDE-8383-A90BACB8608C}.100, hr = 8004100E

  and the WBEM LOG entries such as:

  ABSENT. JOURNAL

  (Sat Sep 04 21:17:56 2010.1034447): GetUserDefaultLCID failed, restorting to system version (Sat Sep 04 21:18:04 2010.1041587): GetUserDefaultLCID failed, restorting to system version (Sat Sep 04 21:18:05 2010.1043210): GetUserDefaultLCID failed, restorting to system version (Sat Sep 04 21:18:09)

  FRAMEWORK. JOURNAL:

  announcement: 2808 [d:\xpsp\admin\wmi\wbem\sdk\framedyn\wbemglue.cpp.2252]
  Warning the connection - provider with this name already existed, substituted with last supplier login (root\cimv2:Win32_ComputerSystemWindowsProductActivationSetting) 04/09/2010 22:28:32.357 phone: 376 [d:\xpsp\admin\wmi\wbem\sdk\framedyn\wbemglue.cpp.2252]
  Warning the connection - provider with this name already existed, substituted with last supplier login (root\cimv2:Win32_ComputerSystemWindowsProductActivationSetting) 04/09/2010 22:38:06.082 phone: 908 [d:\xpsp\admin\wmi\wbem\sdk\framedyn\wbemglue.cpp.2252]
  Warning the connection - provider with this name already existed, substituted with last supplier login (root\cimv2:Win32_ComputerSystemWindowsProductActivationSetting) 04/09/2010 22:52:40.029 wire: 2792 [d:\xpsp\admin\wmi\wbem\sdk\framedyn\wbemglue.cpp.2252]

  WBEMPROX. JOURNAL:

  (My Sep 04 22:48 2010.6437666): NTLMLogin gave rise to hr = 0x8004100e
  (My Sep 04 22:48 2010.6438167): NTLMLogin gave rise to hr = 0x8004100e
  (My Sep 04 22:48:01 2010.6438598): NTLMLogin gave rise to hr = 0x8004100e
  (My Sep 04 22:48:01 2010.6438658): NTLMLogin gave rise to hr = 0x8004100e
  (My Sep 04 22:48:01 2010.6438958): NTLMLogin gave rise to hr = 0x8004100e

  WBEMESS. JOURNAL:

  (My Sep 04 15:07:26 2010.96608095): has not issued an event consumer to the NTEventLogEventConsumer = "Journal of SCM consumer events" event with error code 0 x 80041003. Event of a fall.
  (My Sep 04 15:07:27 2010.96609166): a fall events to be event NTEventLogEventConsumer = "Journal of the events of SCM consumer" consumer in the space of //./root/subscription names
  (My Sep 04 15:07:27 2010.96609166): has not issued an event consumer to the NTEventLogEventConsumer = "Journal of SCM consumer events" event with error code 0 x 80041003. Event of a fall.
  (My Sep 04 15:07:28 2010.96609727): a fall events to be event NTEventLogEventConsumer = "Journal of the events of SCM consumer" consumer in the space of //./root/subscription names
  (My Sep 04 15:07:28 2010.96609737): has not issued an event consumer to the NTEventLogEventConsumer = "Journal of SCM consumer events" event with error code 0 x 80041003. Event of a fall.
  (My Sep 04 21:05:05 2010.263068): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:06 2010.263679): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:06 2010.263829): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:07 2010.264600): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:11 2010.268926): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:13 2010.271310): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:05:29 2010.286792): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:12:04 2010.682381): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:19:23 2010.1120711): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:19:26 2010.1123815): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 21:40:02 2010.2359813): use of NT event log: could not retrieve sid, 0 x 80041002
  (My Sep 04 22:05:07 2010.3865077): use of NT event log: could not retrieve sid, 0 x 80041002

  WMIPROV. JOURNAL:

  (Sat Oct 02 08:03:06 2010.351064): WDM call returned error: 4200
  (Sat Oct 02 08:05:46 2010.511385): WDM call returned error: 4200
  (Sat Oct 02 08:05:50 2010.514690): impersonation failed - access denied
  (Sat Oct 02 08:05:50 2010.514860): impersonation failed - access denied
  (Sat Oct 02 08:11:19 2010.844223): impersonation failed - access denied
  (Sat Oct 02 08:12:20 2010.905251): impersonation failed - access denied
  (Sat Oct 02 15:18:29 2010.365525): WDM call returned error: 4200
  (Sat Oct 02 15:19:10 2010.405963): WDM call returned error: 4200
  (Sat Oct 02 15:19:11 2010.406694): impersonation failed - access denied
  (Sat Oct 02 15:19:11 2010.406704): impersonation failed - access denied
  (Sat Oct 02 15:23:30 2010.666568): impersonation failed - access denied
  (Sat Oct 02 15:25:01 2010.757198): impersonation failed - access denied
  (Sun Sep 03 12:23:13 2010.354629): WDM call returned error: 4200
  (My Sep 04 21:06:39 2010.357403): WDM call returned error: 4200

  I don't know that this is not what you want to hear.  However, from the beginning of your notes, you said that the system was installed with an invalid Windows operating system CD and since you bought Windows XP SP 2, which is the authentic product.  If I am wrong please correct me.

  If you try to run SFC scannow from Windows XP SP2, you will continue to receive the request for the additional CD cover Service Pack 3.

  If you have two options:

  (1) do a fresh install with the Windows XP SP2 and upgrade to SP3 on sites I've proposed below.

  or

  (2) simply download the Service Pack 3 of one of the websites below and use this CD to finish the scannow SFC.

  I think you'd be a lot better off takeing the time to back up all your important documents and files.

  Go to: http://www.gtopala.com/SIW-download.html and download the free version of SIW.

  This will give you at least with all the files and informaition about your device drivers that are currently on your system now.  I had the IT Pro version for years and would be with her.  I know that this version provide you all the keys for any product you may have and no password specified for email or the system.  I know that the free version will not provide passwords, but it can provide you with product keys. If you have lost or misplaced one of your applications can be valuable.  Most of the time, you can download the product if you have the key you're in business.

  Errors that you receive above I think that you are still able to access the internet.  If yes I would like to download the SP3 since

  Microsoft Downloads under: http://www.microsoft.com/downloads/en/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en it's about 316.4 MB and it may take about 2 hours, but it is worth.

  Of course, once this is done you should be able do a fresh install with the purchased Windows XP Sp 2 now you can install the Service Pack from Windows Update or make a CD from the above address or the ISO image from: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2FCDE6CE-B5FB-4488-8C50-FE22559D164E.

  I hope this has been helpful.

  The only errors that are really me you listed above were the following.  That's why I take the time to backup and reinstall.

  09/10/03 12:25:18:289 1360 f54 Agent WARNING: is not Installable rule, updateId = {A11FFEA5-BFFC-43E1-9A02-99970CC142C8}.101, hr = 8004100E
  2010-09-03 12:25:18:360 1360 f54 Agent WARNING: is not Installable rule, updateId = {AFAFB0D2-064F-4B3B-A5F6-8FEB0BFAB287}.100, hr = 8004100E
  2010-09-03 12:25:18:440 1360 f54 Agent WARNING: is not Installable rule, updateId = {0418B8A1-016E-4BA9-9688-5E0BE64CA97B}.100, hr = 8004100E
  2010-09-03 12:25:18:600 1360 f54 Agent WARNING: is not Installable rule, updateId = {BC19109A-8D10-4CDE-8383-A90BACB8608C}.100, hr = 8004100E

  Good luck

  E-mail address is removed from the privacy *.

• SFC/SCANNOW RETURNED THAT HE FOUND SOME CORRUPTED FILES THAT IT COULD NOT FIX... IS THERE A FIX

  WINDOWS VISTA 32 149 GB 2 GB HOME PREMIUM

  ACER ASPIRE 5517-INTERNET EXPLORER 9

  I RAN SFC SCANNNOW AND HE CAME BACK WITH

  SFC FOUND FILES CORRUPTED, HE COULDN'T FIX IT PUT THE CBS RESULTS. LOG AND I FOUND I CAN'T READ BECAUSE OF THE AUTHORIZATION AND THE SIZE OF THE NOTEBOOK OPENS NOT MORE AND I CAN'T COPY AND PASTE

  IS THERE ANY WAY TO REPAIR WITH OUT S WHAT THEY ARE? AUTOMATED AS IN ALL THE?

  Hello

  You have received the wrong information to the other poster here.

  It has been said before on mistakes in this regard, but continues to post.

  You cannot run a repair to start from a Vista DVD installation

  Words, there isn't 'Repair your computer', who had already used this Option, you would find that it is a system system restore restart tool, command, prompt only.

  The other poster would like to read and learn something;

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Booting from a Vista DVD gives you the opportunity to do a startup repair, NOT fix corrupted operating system files.

  To do a repair installation upgrade with a Vista DVD get you in a RACE vista operating system.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Click under 'Further information' on this link to learn how to see what files may not be fixed, etc.

  http://support.Microsoft.com/kb/929833

  See you soon.

• has run the sfc/scannow and it checked at 47%, then gave an account that I have files corrupted, what do I do now?

  I have windows vista. Initially I had problems to install updates trying to fix this problem, I have read some information on how I can check my computer. I ran the scan and it's results, he said. I'm not totally sure what to do now! Help, thank you

  and the repair operation
  2012-07-29 15:30:33, 000000e0 CSI Info [SR] verification complete
  2012-07-29 15:30:34, Info CSI [SR] 000000e1 check 100 (0
  x 00000064) components
  2012-07-29 15:30:34, Info CSI 000000e2 [SR] beginning verify
  and the repair operation
  2012 07-29 15:30:37, CSI Info 000000e4 Verify [SR] full
  2012-07-29 15:30:37, info CSI 000000e5 [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:37, info CSI 000000e6 verify start [SR]
  and the repair operation
  2012-07-29 15:30:38, Info CSI [SR] 000000e7 can not check co
  files mposante for 2149b2158bd96fd6f2822a85eab7e135, Version = 1.0.6001.18551, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:6595b64144ccf1df}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012-07-29 15:30:39, 000000e9 CSI Info [SR] verification complete
  2012-07-29 15:30:40, info CSI 000000ea [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:40, info CSI 000000eb verify start [SR]
  and the repair operation
  2012-07-29 15:30:41, 000000ec CSI Info [SR] cannot be verified co
  files mposante for 2f63d026d754a8db019f0dc3628c7956, Version = 6.0.6002.18208, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012 07-29 15:30:42, 000000ee CSI Info [SR] verification complete
  2012-07-29 15:30:42, info CSI 000000ef [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:42, info CSI 000000f0 verify start [SR]
  and the repair operation
  2012-07-29 15:30:44, 000000f1 CSI Info [SR] cannot be verified co
  files mposante for 37bad053109c1ba5e6cbc63d747eecc7, Version = 1.1.6001.18551, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:6595b64144ccf1df}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (FALSE)
  2012-07-29 15:30:44, 000000f3 CSI Info [SR] verification complete
  2012-07-29 15:30:45, info CSI 000000f4 [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:45, info CSI 000000f5 verify start [SR]
  and the repair operation
  2012-07-29 15:30:47, 000000f7 CSI Info [SR] verification complete
  2012-07-29 15:30:48, info CSI 000000f8 [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:48, info CSI 000000f9 verify start [SR]
  and the repair operation
  2012-07-29 15:30:49, 000000fa CSI Info [SR] cannot be verified co
  files mposante for 4857475077b555ed33e5111d715efd70, Version = 6.0.6002.18208, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012-07-29 15:30:50, 000000fb CSI Info [SR] cannot be verified co
  files mposante for 4c591c4a3483f38370c34586c8bde52a, Version = 6.0.6001.18520, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012-07-29 15:30:50, 000000fd CSI Info [SR] verification complete
  2012-07-29 15:30:50, info CSI 000000fe [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:30:50, info CSI 000000ff verify start [SR]
  and the repair operation
  2012 07-29 15:30:52, info CSI 00000100 [SR] cannot be verified co
  files mposante for 5200c2ac8c8c53edef36bc7fe456c18a, Version = 6.0.6002.18208, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012 07-29 15:30:53, info CSI 00000102 [SR] verification complete
  2012-07-29 15:30:53, info CSI 00000103 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:30:53, info CSI 00000104 [SR] beginning verify
  and the repair operation
  2012 07-29 15:30:55, info CSI 00000106 [SR] verification complete
  2012-07-29 15:30:56, info CSI 00000107 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:30:56, info CSI 00000108 [SR] beginning verify
  and the repair operation
  2012 07-29 15:30:56, info CSI 00000109 [SR] cannot be verified co
  files mposante for 61938ea6c8a81f63a790d27b6cf8f16e, Version = 6.0.6001.18426, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (FALSE)
  2012-07-29 15:30:58, CSI Info 0000010b Verify [SR] full
  2012-07-29 15:30:59, info CSI 0000010 c [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:30:59, info CSI 0000010 d [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:01, Info CSI 0000010f [SR] Verify complete
  2012-07-29 15:31:01, info CSI 00000110 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:01, info CSI 00000111 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:05, info CSI 00000113 [SR] verification complete
  2012-07-29 15:31:05, info CSI 00000114 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:05, info CSI 00000115 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:07, info CSI 00000117 [SR] verification complete
  2012-07-29 15:31:08, info CSI 00000118 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:08, info CSI 00000119 [SR] beginning verify
  and the repair operation
  2012-07-29 15:31:10, CSI Info 0000011b Verify [SR] full
  2012-07-29 15:31:11, info CSI 0000011 c [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:11, info CSI 0000011 d [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:15, Info CSI 0000011f [SR] Verify complete
  2012-07-29 15:31:15, info CSI 00000120 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:15, info CSI 00000121 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:17, info CSI 00000123 [SR] verification complete
  2012-07-29 15:31:18, info CSI 00000124 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:18, info CSI 00000125 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:21, info CSI 00000126 [SR] cannot be verified co
  files mposante for b246b8b2fc232b1823de7cc95d2ad8cb, Version = 6.0.6001.18426, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012 07-29 15:31:21, info CSI 00000128 [SR] verification complete
  2012-07-29 15:31:22, info CSI 00000129 [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:31:22, info CSI 0000012a verify start [SR]
  and the repair operation
  2012 07-29 15:31:24, CSI Info 0000012 c [SR] verification complete
  2012-07-29 15:31:25, info CSI [SR] 0000012d check 100 (0
  x 00000064) components
  2012-07-29 15:31:25, info CSI 0000012e verify start [SR]
  and the repair operation
  2012-07-29 15:31:27, CSI 0000012f [SR] Info cannot be verified co
  files mposante for c14dc8477e46e9a63d64b6e08d5791c3, Version = 6.0.6002.18208, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012 07-29 15:31:27, info CSI 00000131 [SR] verification complete
  2012-07-29 15:31:28, info CSI 00000132 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:28, info CSI 00000133 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:30, info CSI 00000135 [SR] verification complete
  2012-07-29 15:31:30, info CSI 00000136 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:30, info CSI 00000137 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:32, info CSI 00000138 [SR] cannot be verified co
  files mposante for d53a8c69bdc376747b8a05f13e3c7b8c, Version = 6.0.6002.18208, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012-07-29 15:31:33, CSI Info 0000013a Verify [SR] full
  2012-07-29 15:31:33, info CSI 0000013b [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:31:33, info CSI 0000013 c [SR] beginning verify
  and the repair operation
  2012-07-29 15:31:36, Info CSI 0000013e [SR] full Verify
  2012-07-29 15:31:36, info CSI 0000013f [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:36, info CSI 00000140 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:42, info CSI 00000142 [SR] verification complete
  2012-07-29 15:31:43, info CSI 00000143 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:43, info CSI 00000144 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:43, info CSI 00000145 [SR] cannot be verified co
  files mposante for e8ecb225ded34cf1c95d86a0b62c0df1, Version = 6.0.6002.18490, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012-07-29 15:31:45, Info CSI 00000147 [SR] check complete
  2012-07-29 15:31:46, info CSI 00000148 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:46, info CSI 00000149 [SR] beginning verify
  and the repair operation
  2012-07-29 15:31:48, CSI Info 0000014b Verify [SR] full
  2012-07-29 15:31:49, info CSI 0000014 c [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:49, info CSI 0000014 d [SR] beginning verify
  and the repair operation
  2012-07-29 15:31:49, CSI 0000014e [SR] Info cannot be verified co
  files mposante for ff2aece97c0e1cb2653c15e0fecbce68, Version = 6.0.6002.18407, pA
  = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, P
  ublicKeyToken = {l:8, b:31bf3856ad364e35}, Type neutral, neutral, TypeName Public
  Neutral, clear key may be damaged (TRUE)
  2012 07-29 15:31:54, info CSI 00000150 [SR] verification complete
  2012-07-29 15:31:54, info CSI 00000151 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:31:54, info CSI 00000152 [SR] beginning verify
  and the repair operation
  2012 07-29 15:31:59, info CSI 00000153 [SR] cannot repair me
  House file [l:20 {10}] "pcasvc.dll" Microsoft-Windows-Application-experience-Pro
  Gram-Compatibility-Assistant, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECT =
  URE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b
  {: 31bf3856ad364e35}, type neutral, PublicKey neutral, TypeName neutral in the sto
  Re, the file is missing
  2012 07-29 15:32:02, info CSI 00000154 [SR] cannot repair me
  House file [l:20 {10}] "pcasvc.dll" Microsoft-Windows-Application-experience-Pro
  Gram-Compatibility-Assistant, Version 6.0.6001.18000, pA = PROCESSOR_ARCHITECT =
  URE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b
  {: 31bf3856ad364e35}, type neutral, PublicKey neutral, TypeName neutral in the sto
  Re, the file is missing
  2012-07-29 15:32:02, info CSI 00000155 [SR] this component w
  referenced under the name of [l:158 {79}] "Package_20_for_KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1"
  ".18000.936330 - 33_neutral_GDR".
  2012 07-29 15:32:03, info CSI 00000156 [SR] couldn't reproj
  ECT corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"PC
  ASVC.dll '; source file in the store is also corrupted
  2012 07-29 15:32:03, info CSI 00000158 [SR] verification complete
  2012-07-29 15:32:04, info CSI 00000159 [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:32:04, info CSI 0000015a verify start [SR]
  and the repair operation
  2012 07-29 15:32:10, CSI Info 0000015 c [SR] verification complete
  2012-07-29 15:32:11, info CSI 0000015 d [SR] check 100 (0
  x 00000064) components
  2012-07-29 15:32:11, info CSI 0000015e verify start [SR]
  and the repair operation
  2012-07-29 15:32:18, Info CSI 00000161 [SR] check complete
  2012-07-29 15:32:19, info CSI 00000162 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:32:19, info CSI 00000163 [SR] beginning verify
  and the repair operation
  2012 07-29 15:32:26, info CSI 00000166 [SR] verification complete
  2012-07-29 15:32:27, info CSI 00000167 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:32:27, info CSI 00000168 [SR] beginning verify
  and the repair operation
  2012-07-29 15:32:34, CSI Info 0000016a Verify [SR] full
  2012-07-29 15:32:35, Info CSI 0000016 b [SR] 100 (0 check
  x 00000064) components
  2012-07-29 15:32:35, Info CSI 0000016 c [SR] beginning verify
  and the repair operation
  2012 07-29 15:32:52, info CSI 00000174 [SR] verification complete
  2012-07-29 15:32:53, info CSI 00000175 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:32:53, info CSI 00000176 [SR] beginning verify
  and the repair operation
  2012-07-29 15:33:04, CSI Info 0000017a Verify [SR] full
  2012-07-29 15:33:05, info CSI 0000017b [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:33:05, info CSI 0000017 c [SR] beginning verify
  and the repair operation
  2012-07-29 15:33:12, Info CSI 0000017e [SR] full Verify
  2012-07-29 15:33:13, info CSI 0000017f [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:33:13, info CSI 00000180 [SR] beginning verify
  and the repair operation
  2012 07-29 15:33:28, info CSI 00000182 [SR] verification complete
  2012-07-29 15:33:29, info CSI 00000183 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:33:29, info CSI 00000184 [SR] beginning verify
  and the repair operation
  2012 07-29 15:33:42, info CSI 00000186 [SR] verification complete
  2012-07-29 15:33:43, info CSI 00000187 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:33:43, info CSI 00000188 [SR] beginning verify
  and the repair operation
  2012-07-29 15:34:02, CSI Info 0000018a Verify [SR] full
  2012-07-29 15:34:02, info CSI 0000018 [SR] b check 100 (0
  x 00000064) components
  2012 07-29 15:34:02, info CSI 0000018 c [SR] beginning verify
  and the repair operation
  2012 07-29 15:34:11, Info CSI 0000018 d [SR] cannot be verified co
  mposante files for Microsoft-Windows-font-TrueType-EucrosiaUPC, Version = 6.0.600
  2.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neut.
  RAL, PublicKey neutral, the manifest may be damaged (REAL)
  2012-07-29 15:34:11, CSI 0000018e [SR] Info cannot be verified co
  mposante files for Microsoft-Windows-font-TrueType-TrebuchetMS, Version = 6.0.600
  2.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope =
  1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neut.
  RAL, PublicKey neutral, the manifest may be damaged (REAL)
  2012-07-29 15:34:12, CSI 0000018f [SR] Info cannot be verified co
  mposante files for Microsoft-Windows-font-TrueType-ArialBlack, Version = 6.0.6002
  . 18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1
  nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutr
  Al, PublicKey neutral, the manifest may be damaged (REAL)
  2012 07-29 15:34:12, info CSI 00000190 [SR] cannot be verified co
  mposante files for Microsoft-Windows-font-TrueType-JasmineUPC, Version = 6.0.6002
  . 18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1
  nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutr
  Al, PublicKey neutral, the manifest may be damaged (REAL)
  2012 07-29 15:34:27, info CSI 00000194 [SR] verification complete
  2012-07-29 15:34:27, info CSI 00000195 [SR] check 100 (0
  x 00000064) components
  2012 07-29 15:34:27, info CSI 00000196 [SR] beginning verify
  and the repair operation
  2012 07-29 15:34:27, info CSI 00000197 [SR] cannot be verified co
  mposante files for Microsoft-Windows-font-TrueType-LeelawadeeBold, Version = 6.0.
  6002.18208, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope
  = nonSxS 1, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName n
  eutral, PublicKey neutral, the manifest may be damaged (REAL)

  C:\Windows\System32>Sfcdetails.txt
  'sfcdetails.txt' is not recognized as an internal or external command
  operable program or batch file.

  C:\Windows\System32 >

  Hello

  (1) what exactly happens when you try to install updates?

  (2) you get any error message?

  (3) what is the description for updates which are failed?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: To resolve this problem, I suggest to read the article below and follow the steps in the link and check if that helps.

  Note: It's also applies to windows 7:

   

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:

  http://support.Microsoft.com/kb/928228

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• I went through the process of the sfc/scannow and got these errors.

  2012-06-07 10:09:45, CSI Info 000001 d 8 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-06-07 10:09:45, 000001da CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  I can confirm that it can be ignored.

• My PC does not CD, and that's how they got it to download.

  My laptop does not CD and they gave me the CD to download. I have my serial code, but I'm not aware of how badly need to do it now. Please help me, my computer is an ASUS.

  There is no order or CC registered to your identification code in Adobe offering, please choose:

  Available downloadable Setup files:
  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  Download and installation help links Adobe
  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
  I need the codes to download my Photoshop CS5 and LIghtroom software aps?

  Concerning

  Stéphane

• sfc/scannow poster always files corrupt that it cannot repair

  Hello

  I had problems with my new HP laptop dv7 and I followed the steps recommended by the people of hp and after analysis of all the readers and the search for viruses etc. I ran sfc/scannow utility.  This analysis showed the corrupted files that could not be repaired.  So I did a full system recovery disk restore and once again had the same message of corrupted files.  Then I formatted the hard drive and installed the operating system from disk and once again had the same message of corrupted files of sfc/scannow.

  Then... hp sent me a new laptop better with the same operating system (Windows Vista Home Premium SP1 - 64-bit) and so I just got my new computer by mail and the first thing I did was run sfc/scannow and of course once again, it showed corrupted files that could not be fixed!

  What is going on???

  Combing the web, I noticed that this seems to be a widespread phenomenon.

  What should I do?

  Thank you

  Lorin Crandall

  Hi MistaRaw,
  If you have corruption on your system, you can perform an in place upgarde or a repair install.
  The instructions are:
  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or an upgrade on the spot with the following steps: (Note: this does not always solve all the problems, especially if the corruption was caused by a 3rd party program or service, you may need to do a clean install) If this is not successful)

  <><><><><><><><><><><><>

  Please make sure that you backup all the important data before you continue. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><>

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  Note: Tit the following settings is reset by default:

  Its computer system

  Device drivers

  Visual effects

  Windows Mail

  Windows services

  If you notice missing files after the upgrade, look in the following folders:

  C:\Windows.old

  C:\$INPLACE.~TR

  C:\$WINDOWS.~Q

  These files can be eliminated with disk cleanup as "records destroyed by upgrade to Windows".

  Delete files using disk cleanup

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think