I lost my DVD player. What should I do?

Similar Questions

• Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  Hello! My AirPort Express (802.11a/b/g) lights no more. I think he lost his power. What should I do to restore its power?

  If AirPort Express light does not illuminate, this indicates that the internal power supply inside the Express did not, and the device will need to be replaced.

  If you really a 802.11a/b/g in the Express version, it is at least 8 years old and probably much older than that.  Average life of this product was about 3-4 years, then you have had surprisingly good luck with your product.

• I added on a new printer and lost my audio. What should I do?

  I added on a new printer and lost my audio. What should I do?

  Because this isn't a normal behavior, please provide the following information:

  What version of Windows you have, including the service pack (right click on desktop and select properties)

  What is the brand and model of your computer?

  What is the brand and model of the printer?

  Describe, step by step, exactly how you have added the new printer.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Double-click any entry that displays a warning icon and a message in the box "Device status" report (also report what is the name of the device)

• Lost my DVD player during the restoration of the system

  I had to do a system restore and finished my CD/DVD drive has been lost.  When I turn on my computer turns the light on the drive and I can open the drawer, but as soon as windows starts to load it goes off and I can't use it.  So that the computer knows it's there, but it does not work.  I went to Device Manager and it shows no DVD player.  Any suggestions?

  Hello

  You can check this link:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

• Tecra A2 - lost sound and ConfigFree, what should I do?

  1. the device does not work, the "Sounds and Audio Devices Properties" indicates "No. Audio Device. Attempted relocation Sigmatel Audio and RealTek HD audio, but without success, what I try next?

  Also, CofigFree does not work despite having tried a reinstall, at startup, an error message appears saying "not found TOSHIBA Network Device Usermode i/o Protocol. Please reinstall ConfigFree'... How can I fix it?

  Thank you very much!

  I m wondering what you did cela sound and Configfree don t work anymore?  :|
  Regarding the sound issue:
  First, you must remove the software from Realtek sound system manager.
  Control Panel-> software

  Then go to Device Manager and remove the sound card in the list of devices (simply mark it and press DELETE).
  After that restart the laptop, wait for windows would ask the audio driver and then point to the driver files that you downloaded from the Toshiba driver page.

  Regarding the ConfigFree:
  Usually the Configfree should work. If there is something wrong then you should uninstall the Configfree first.
  Then you must restart the computer laptop and recommended to clean the registry using the CCleaner (it s free do google)
  After this attempt to install this new.

• Lost CD/DVD player

  My computer OS is Vista, and I had a defective CD/DVD drive replaced by the shop I bought. It worked when I brought home, but now, in 'my computer', it shows that drive d is now a disk that I don't have in my computer. I rarely used the CD/DVD drive and noticed recently disappeared. PnP should pick up but does not work. Now I can do? Could the BIOS have been modified in some way, where I need to flash with an upgrade?

  Hello

  Did you change your computer?

  I suggest you to see the links and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below for

  I also suggest that you run the Microsoft fixit tool and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• I am trying to load songs from a CD, but my computer is reading in the DVD-RAM, what should I do?

  I tried several cd and no job, also have a hub usb in use.

  Hello

  · Do you have any third-party software CD burning on the computer?

  · Were there any changes made on the computer before the show?

  Try the steps from the link: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

• I want to format my hard drive and install vista dvd. What should I do?

  Never done this before any help appreciated.

  I ran format c:\ and attempted then just install windows vista. I had a lot of problems starting etc. Can someone tell me exactly what I need to do? I have format it then create partitions or just intall windows after formatting?

  Help?

  Boot from the Vista CD and follow the prompts to install the operating system. It will be
  guide you with formatting and partitioning (unless you have a desire for a
  specific partitioning strategy, let the software guide to default values your
  choice.
   
  Go here:
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
   
  for orientation
   
  "jeff_polton" wrote in message news: ec0512a7-c1c4-4aa7-b394-be4e19aaf761...
  > Never did this before any help appreciated.
  >
  > Format c:\ ran and attempted then just install windows vista. I have
  > had a lot of problems starting etc. Can someone tell me exactly what I have
  > do? I have format it then create partitions or windows just intall
  > after formatting?
  >
  >
  >
  > Help?
  >
   
   

• Buy adobe photoshop lightroom 4 but have no dvd player, what to do?

  I bought and I have the cd key but no way for installation in my MacBook

  Download the trial version on the Adobe site.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5520

  Enter your serial number to convert it to a licensed version.

• I can't get my CD/DVD drive to eject the disc, what should I do?

  I can't my CD/DVD drive to eject a DVD disc, what should I do?

  http://www.ehow.com/how_2324559_eject-stuck-DVDCD-drive.html

  Straighten a paper clip and use it.

  http://video.about.com/pcsupport/open-a-stuck-drive-on-your-PC.htm

  A video about it.

  See you soon. Mick Murphy - Microsoft partner

• I need a update for my HP DVD player & not rely on Microsoft

  I have a problem with HP DVD & I tend to disagree if is saying that my DVD drive (HP DVD RW AD - 7586H) must be replaced. My dvd player works when he wants (has a clean spirit). The last update for my DVD drive is 21/06/2006 (7 years and enjoyed passing updated driver). Ive uninstalled my DVD drive & reinstalled after startup & has nothing there is never, ever a update for my via DriverBooster, DriverScanner or my in-kind Assistant from HP DVD drive & I used a certain programs to update my driver (Driverbooster, DriverScanner etc.). NEVER. If HP can give me a BIOS update, why not send me a DVD Player update through me HP Support Assistant HP?  Well, I think this is a time of combat that HP should create an update to solve all the problems of DVD rather than depend on Microsoft to fix it. If my DVD drive was well Windows I would use the microsoft Fixits, but since it is a HP DVD drive, I think HP should solve the problem, not Microsoft.

  What you see in the Device Manager is the driver control for the dvd player, what are you really need to look at is the version of the firmware on your dvd player & see if a newer firmware is available.

  Usually many even intermittent faults are more material than firmware, readers are very cheap but & can access a job of 2 minutes to replace if necessary more you a better quality disc & spec as you wish.

  I think KH21 is new firmware for this dvd player.

• -DVD burn does not work in the DVD player sometimes

  I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

  But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

  Is there a way to test the DVD player?  Should I just replace it?

  Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

• My computer tells me that I have problems with web connectivity. What should I do?

  I have an Acer Aspire4752Z-4688. It's a laptop and it is ielling me constantly that I lost web connectivity. What should I do to fix this?

  Hello

  1. what web browser do you use?
  2. What is the exact message that you found?
  3. were there any changes to the computer priro to the question?

  Follow the steps in the link.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• What should I do if my computer says that the DVD player is not correctly?

  Problem with the DVD player:

  It shows that the DVD player is not correctly.

  What should I do?

  Please, help me to solve this problem with DVD player: it shows that the DVD player is not correctly. And it is not ejected.

• How do I see what I burn on my aloan stand home dvd player.

  I burned a dvd. But I can watch the dvd on my computer, but not on my reader dvd standaloan. It gets more complicated all the time. the closest I can fill a dvd successfully, it seems to be that I'm missing. I have read the guide dvdflick and attempted to finalize my burn, but then burn IMG takes over and img burn not adopted for ntsc format. Can some a unmask for me what I am doing wrong...

  Some free-standing DVD players will not play a DVD-video made home.

  In any case... maybe the info will help you:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.