Network Unreachable behind the Internet sharing

Similar Questions

• I'm doing the internet sharing xp machine window on my laptop with window 7.

  I have two lan lan card con 2A connected directly connected to our internet provider and lan 1 is connected to my laptop, our internet provider actually mac binding in my xp machine, but before the month of the mac link was there but internet was shared and suceessfully work in both clients, but after my xp client c format its not to share the internet coneection While in the login window network shows that the internet is shared lan con. 2 which is directly connected to the internet, but I have laptop his watch not that my laptop is connected to the internet... get in mind that, before the format and after the format the mac liaison was there... and in XP network connection, its shows that internet connection to the lan con.2 (which is to have the internet connection) the machine is shared...

  Hi Pierre,.

  You can follow these links and check if the problem persists:

  How to configure Internet connection sharing in Windows XP?

  Troubleshooting Internet connection sharing in Windows XP

  Hope the helps of information.

• Unable to connect to a network or to the Internet on my Dell XPS1530.

  Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

  Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can access network, but not the internet.

  I am able to access my network but not the internet.  However, I can get on the internet if I use parallels.  Does anyone else have this problem? If so, how have you managed to solve.  I rebooted without parallels and nothing changes.  Any suggestions?

  In the menu bar, you select

   ▹ System Preferences... ▹ ▹ ▹ Advanced TCP/IP network

  What values are given for the following?

  Configure IPv4

  IPv4 address

  Subnet mask

  Router

• With 2 monkeys roaming network connected to the internet

  Hello

  My apologies if this has been discussed (I did some search but did not find anything useful). I have the question realted following a change in my network topology:

  current installation:

  -Cable modem is connected to the WAN port on my Time Capsule (3 TB Tower). Transport CANADA acts as DHCP unit (modem is silent, that is without router)

  -Port LAN of the TC is connected to the WAN of the MONKEY #1 via CAT6 Ethernet port.

  -MONKEY port LAN #1 is connected to the WAN of the MONKEY #2 port

  -Port LAN EPA # 2 is connected to the WAN of the MONKEY #3 port

  -all the monkeys (the latest models of Tower) Act in Bridge mode, but create a WLAN.

  I like that, a roaming welll workign network throughout the House.

  New installation / planned:

  -J' changed from cable to fiber to the home. So now I have a new box of fiber that offer Internet via 4 Gigabit Ethernet ports.

  -The new fiber box is physically located between the TC and the #1 MONKEY.

  -without having to pull a new cable in the box of fiber for the TC (for feed on the Internet in the beginning of the string), I was thinking about this:

  -1 Ethernet cable from fiberbox to the TC and feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

  -Switch the TC using the Bridge so that the fiber box making the DHCP

  However, now the TC is is more directly connected to the chain of the EPA.

  QUESTIONS RELATING TO THE:

  -I'll always be able to have a mobile network, or I will with 2 networks, i.e. 1 created by TC and 1 piloted by monkeys?

  -all Clients on the network will see always shared devices (printer, for example) on the network?

  Thank you very much for your expert advice on this.

  Rgds,

  Sascha

  -run 1 Ethernet cable from fiberbox to CT...

  -Switch the TC using the Bridge so that the fiber box making the DHCP

  It should work.  (See Note below)

  feed the Internet through another Ethernet into the WAN port on the #1 MONKEY in the remaining string.

  It should work. (See Note below)

  However, now the TC is is more directly connected to the chain of the EPA.

  Since the TC is connected to Ether even switch on the product of the fiber to which EPA #1 is also connected... TC and AE #1 are, indeed, also linked together.

  I'll always be able to have a roaming network

  Yes

  -all Clients on the network will see always shared devices (printer, for example) on the network?

  Yes, assuming the fiber box works properly.

  Important note... Your plan to have the TC and the MONKEY in Bridge Mode expected to work... BUT... Apple has another idea on how a mobile network should be configured. See the information on a roaming network in this Apple support document:

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

  More precisely... Apple will tell you to connect an Ethernet cable from the product of the fiber to the WAN on the TC port and set the TC for managing DHCP and NAT... just as it does now.  Then... all the rest would be put in place just as you have it now... with a connection Ethernet between a LAN port on the TC to the WAN on EPA #1, LAN on EPA to WAN on EPA #2 #1, etc..

  If you follow the advice of Apple... you'll get an error Double NAT on your network... Apple who will tell you to ignore. How well your network will work with a Double NAT problem is open to question.

  I don't recommend to follow advice Apple... just pointing out that Apple has different ideas and interesting on how to do things, which sometimes goes against the traditional rules of network management.

• My laptop, connect to the network, but not the internet!

  My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

  Hello

  On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int ip reset c:\resetlog.txt

  netsh winsock reset

  Type exit and press ENTER.  Restart the PC and see if you can log in now.

  Kind regards

  DP - K

• ASUS Infinity wifi connects to the WRT54G Router and network, but not the internet

  I have a WRT54G work throughout our House. It has 4 ports for wired ethernet and multiple wireless connections works without any problem. Currently my Droid phone, Tablet iPad and 2 laptops to connect and move to the internet via a wireless connection.

  Today, I bought a new Asus TF700T Infinity tablet.  I can so he can connect to the router, see the network and the router can see the Tablet Infinity (assigns an IP address), but no internet access.

  I need some ideas here, or suggestions as to what tools I can use to see where the traffic of the Tablet is blocked.  The newspaper on the router shows me nothing. I guess there is a port blocked by the router, but no idea those who.

  Tried reset hard and a firmware upgrade does not.  In fact the latest firmware upgrade (4.21.5) watered the entire network, so I started 4.21.1

  Maybe it's not a router issue maybe that's the problem with the Tablet? Can ping you the ip address assigned to the ipad? You can also try t o assign a static settings on your tablet. If these things still do not work, you may need to contact asus support.

• trying to connect to the internet, it connects only "local". I have to power cycle my network to access the internet.

  Connection to the local only when the internet connection is desired.

  Whenever I turn on my laptop & try to connect to the internet, it just connect 'local' so I tunplug the router to the computer & the power of the wall.  Then turn router back on, reconnect to the desktop computer & then it works.  It did not start until last week.  Help, please!

  Hello

  Did you change your computer?

  Method 1:

  I suggest you check in SafeMode with network.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  I also suggest you to follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I would also update the NIC drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Can connect to the network, but not the internet, a "Local" access only

  Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.

  I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.

  I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.

  I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!

  Hi Ima be,

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Network conection to the Internet problem

  I have win 7, and I saw thet RLANS in Ipv6 Akcess works do not on the GB ethernet LAN cable?

  Maybe is reseved Ipv6 for wifi connection, I don't know?

  Hello

  If the computer's ethernet drivers are up to date, he will be in charge of IPv6. IPv6 is supported only on the side of the internet connection, IE via the modem directly. If the connection goes through a router or access point, this will not work.

  Kind regards.

• Welcomed the peripheral connected network cannot access the Internet

  I had problems getting my network hosted to start for months. Now, it starts very well and my Samsung Smartphone shows connected when I turn on the phone's WiFi. BBM has even said 'connected' in the status bar. But I can't access the net. Browsers not loading pages in all, BBM messages and whatsapp are not sent. When I checked the properties of connection WiFi network from the phone, signal is "very strong", speed of 54 Mbps. DHCP has been disabled at the start. After I enabled it, the phone didn't connect at all. Stuck on "getting IP address." Network troubleshooting says "connection to the local network 12 has no valid IP address. The connection to the local network 12 is the connection that uses Microsoft Virtual Wireless Adapter.

  Hi Pierre,.

  I understand that you have trouble connecting to the hosted network. You can contact Windows 8 IT PRO TechNet forums for the hosted network troubleshooting steps.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home

• 2 13 pro tablet of yoga - to connect to the network, but not the internet

  Hello!

  I got my new yoga today and immediately connect it to wifi...

  It connects to my home but not internet network (or connection very very creepy)

  tried home through my phone LTE and still...

  tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

  im looking good on the web and don't find anything...

  probobly you are the people with the experience...

  help would be appritiated!

  Kind regards.

  Hey guys quick update!

  After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

  they replace them with sealed brand new...

  so thanks for the help!

• tried to create a network for internet sharing. But the option "activate internet ' is not available in the share window during the creation of the new network

  Please kindly help me out in the question above

  Hi ShamanthKumar,

  Which versions of Windows are the computers that you want network running? (Windows 7, Vista, or XP?)
  
  
  You are using a router, and if so, the computers are connected via cable or wireless?
  
  
  I suggest to look at the following articles that will show you how to network your computers for internet sharing:
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

• Network using the internet key to Rogers

  I just high speed internet with Rogers internet key (uses cell signal) and it works fine. I went and bought a WRT110 so I could set up a home network, but I never considered that the router wants to be connected to a modem (which I do not have because it's just a small USB key). I know there is a way to put in place the internet sharing with this router but don't know how. I would also be also if possible the ability to share files. Any help would be greatly appreciated.

  Sharing Internet can be done, but its not sure if it will work with your type of connection or not.

  Connect the USB key to your computer, and then connect the Ethernet cable from your computer to the Internet Port Linksys router, you need to connect one of your computer to the Ethernet Port of the router, you can access the router configuration page and make the changes to this topic.

  Click here how to enable ICS.

  Once you enable ICS, then go to the computer that is connected to the Ethernet Port of the router and check if you are able to browse Internet. If you are able to browse the internet on your computer, on the same computer, you need to connect to your router and make the changes of no thread on this, so that your wireless computer can go online via the router wireless.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Can someone help me with my problem on the Internet connection sharing?

  I have a LAN wired connection but no wifi capability. I managed to share the internet connection from my pc to my phone by using the "Internet sharing connection" using the usb cable and the first day, it works fine and I can use my phone for internet access. Unfortunately, the 2nd day I can't connect and it says "internet is not available.

  I am currently using windows 7. I hope some of you can help me thanks.

  

  It is on my pc and it says now no internet access. I enabled the "allow other users of the network to connect to this computer" as what I said the first day, it works very well.

  Hello Fritz,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted network drivers or incorrect network settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, use method 2.

  Method 2:
  Use the steps described in this article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1

  Additional information:
  Using ICS (Internet Connection Sharing)
  http://Windows.Microsoft.com/en-us/Windows/using-Internet-connection-sharing#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you