I'm unable to uninstall HP Photosmart 7280 printing software

Similar Questions

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• HP Photosmart 8230 Printer: HP Photosmart 8230 printer software

  Hello world

  I had to reinstall HP Photosmart 8230 printer but have lost the instalation CD. Not supported by HP more. Someone know where I can get the no?

  Thank you

  Hello

  Thank you for using the forum.

  You can try the following:

  1. Plug in the printer and connect it to your computer
  2. Turn it on
  3. Right-click the Start button, then click on the following text:
  4. Control Panel
  5. Devices and printers
  6. Add a printer
  7. Click the printer that I want isn't listed
  8. Add a local printer with manual settings
  9. Next
  10. Use an existing port
  11. DOT4_001 (printer HP device)
  12. Next
  13. Under manufacturer select HP
  14. Under printers select HP Photosmart 8230 series class driver
  15. Next
  16. Select use the driver that is currently installed, or replace the pilot current (any)
  17. Next
  18. The printer name is click next
  19. Do not share this printer
  20. Next
  21. Print a test page
  22. Close
  23. Finishing

  Hope that helps!

• To uninstall the digitalpersona finger printing software

  I installed the DIGITALPERSONA personal finger print software on my labtop Windows 7 Professional.

  It is inconsistent and does not. There is no uninstall utility, how can I uninstall this software correctly?
  Brandon

  Click Start-> Control Panel-> programs and features.  Click the program, and then click Uninstall.

  Good luck.

• Unable to uninstall HP Photosmart Plus B209a-m.

  I can't uninstall my printers software. I double click on the software of printer dirver. Then, I select "uninstall." Then, I select "uninstall all HP products associated with this device. The software then comes back and tells me that "what will be removed" HP Photosmart Plus B209a-m ". I then "select continue ' and he comes back and tells me that"you must restart your computer to complete the uninstall,

  "Please save all your work and then click on finish, uninstall will end after restarting your computer.

  I then click on 'next' and it restarts my laptop BUT after restarting, nothing happens. If I go through the process again the same thing happens. According to me, there is a file or which prevents the process happening. Any help would be great.

  My laptop is a laptop CTO Pavilion dv7t-7000.  And of course the printe is a HP - Photosmart B209a more

  Hello @Harlydude , welcome to the forums

  I read your post about the problems you are having with your Photosmart Plus B209a uninstalling model. May deepest uninstall, try the following steps.

  1. Click Start, type %temp% , enforcement, and click OK.
  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one 7z folder, try the newest one).
  3. open the util folder.
  4 open the CCC folder.
  5. run the Uninstall_L3.bat for a HP PC.
  6. once the uninstall is complete, restart the computer.

  The software should be removed now.

  Let me know how it goes for you!

• Photosmart C4380: printing software

  Is there a software that will allow my printer work with windows 10 pro (64-bit)? before I bin!

  Try this direct link to download the driver.

  http://ftp.HP.com/pub/softlib/software13/COL30677/MP-110028-3/PS_AIO_02_USW_Full_Win_WW_140_408-5.exe

  Concerning

  PrntDr

• Photosmart 3210xi: xi Photosmart 3210 printer software to win 10

  Where can I get the all-in-one software compatible with Windows 10?  Print very well, I can't seem to get it tested.  Help, please.

  Hello

  Thank you for using the forum.

  Cannot find the software FULL of features for you on hp.com, so you must print using the-OS drivers.

  Have you tried the HP scanning and Capture of AiO remote control?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Also for a sweep, can you try to open Paint and then try scanning from there?

  

  Hope that helps.

• Error message - system tries to install the HP Photosmart C4680 printer software

  I installed Windows 8 Preview of consumer months ago.  Now, I get an installation error that does not affect the printer - it is fine as it is - and I can't do the install failed mended stop repeat whenever I want to use the printer.

  I'm guessing that the drivers are not compatible with this version of Windows, and the system tries to do a regular update of some sort.  Known issue?  If so, can I disable in order to install so that I'm not tying up of resources all the time?

  Hi CalypsoReid,

  See the following thread: http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-Windows-8-Consumer/m-p/1334287

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• Wireless using Photosmart 7280 AIO and Photosmart 3210 AIO USB - installation problem

  I use Windows XP sp2. The 7280 is new, so I was told HP support completely uninstall all my computer HP software, then install more software 7280, then use the menu option 'Add device' on the installation software of 7280 again to install the 3210. I have installed suceesfully 7280 software and am able to access the 7280 on my wireless LAN. However, when I use the installation of 'Add device' in the installation software, I get the dialog box 'Connect Your Device Now' (following the instructions for the installation of the USB) and when I connect the USB to my 3210 to the computer, I get the Windows Wizard 'addition of material", which is unable to locate the drivers for the 3210. The button 'Next' in the 'Connect Your Device Now' dialog box is not enabled, so I can't continue. It seems strange to me that Windows identifies the device but the HP software does not see. The 3210 is not in my list of printers in Windows.

  Even more strangely, yesterday I ran the base driver and utility download for the 3210 off the coast of the HP site after installing the 7280 software (probably shouldn't have done) and everything worked, I was able to print on both devices, however this morning when I turned on the computer I got a HP dialog box telling me that the installation failed and it can uninstall some software including all drivers 3210.

  Any suggestions? What I have to spend 2 + hours to uninstall and reinstall from the beginning again?

  Well, I think that I solved, at least as well as is possible. I just uninstalled, installed all the 3210 drivers downloaded from HP, then install the software suite full 7280. Both printers are available and print jobs, but the HP Solution Center software only allows me to access the AIO 7280, so I guess I won't be able to scan from my 3210 on my computer - I have to use the 7280 for this. I didn't install the software suite full of the 3210 - maybe that would give me two centers solutions HP (two different versions), one for the 3210 and one for the 7280...

  Incidentally, I don't have the CD 3210 - I think I have lost - so I'm dependent on the HP download page.

• problem with photosmart 7280

  I have a photosmart 7280 I used with windows for a year, I just got an imac with osx 10.5.6 I installed it and everything works except print I can print a test page but of other prints just stop in the queue, I uninstalled and reinstalled, I have reset the printer installed a newer version of the unplugged software installation off usb back on everything I could find on the help page I can do? Maybe drivers?

  So, I just wanted to update everyone here my situation I have FIXED Yes IT is true, I went out and bought a different brand printer and wala it works and just in time, because now the fax stopped working. This printer will be the last HP product I will ever buy, I won't have to try to understand your foreign Department to help with condescension. One wants a free before you go all office space 7280?

• Photosmart 7280 stopped printing

  Photosmart 7280 is connected to the HP desktop Windows 7 ultimate (upgrade from Vista) suddenly not printing.

  When press print icon, message flashes on the screen as if she sent the document to the printer.  Check the print queue says no document. Scan function works to scan an image on computer.  Driver uninstalled driver (32-bit), reinstalled. Printer prints.  Turn off the computer and it reboot:

  Pinter does not print. Printer prints normally from a wireless laptop. Help, please.

  Thank you much for the help. Printer doctor guilty on the HP support. Doctor found conflict printer driver. Recommended to uninstall the driver, reinstall via Windows update. Impossible to reinstall from Windows update, but found 22 updates installed Microsoft. Then find a link to the site to download driver HP and reinstalled driver. Now, it print after you restart the computer.

• How do we install the all-in-one for my photosmart 7280

  I just bought a new macbook with mac OS X 10.9.4 and I just cannot print pictures of her on my photosmart 7280. the generic driver provided in USS also seem to, I only print in B & W. I can't understand how to scan or use any other feature that I have on my PC which runs the full features of HP all-in-one software.  Thanks for your help

  SOLVED ASU has not installed the authentic hp driver. It was download and install a generic driver. So I downloaded the full package manually on the apple support site and installed. Work very well. Works works, photo printing, scanning and fax. I also have the leverage of available ink.

  Here is the link:

  http://support.Apple.com/kb/dl907

• I'm unable to uninstall Windows Media Player 11, because it seems that the hidden folder $NtUninstallwmp11$ and its content have been accidentally deleted from my computer.

  I'm unable to uninstall Windows Media Player 11, because it seems that the hidden folder $NtUninstallwmp11$ and its content have been accidentally deleted from my computer by another software. I want to go back to the previous version of Windows Media Player (WMP10). Please let me know how to uninstall WMP11 or back to WMP10.

  Please note that the process mentioned in this MS article did not.
  http://support.Microsoft.com/kb/934372
  Thanks in advance.
  original title: impossible to uninstall WMP11

  Hello

  Try to restore the system to the date and time when the computer was working fine.

  Click on the link below.

  http://support.Microsoft.com/kb/306084

  If you are still experiencing a problem, I suggest you try to post in the link mentioned below.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Windows XP TurboTax AVG virus. Now, I'm unable to uninstall / reinstall TurboTax. error message 1635 windows install problem.

  I am using windows XP Pro. First of all, I had an older version of AVG tell me turbotax was a virus. After that installation of the version of AVG update this post has disappeared. TT told me to uninstall and then reinstall TT 2010. However, I'm unable to uninstall / reinstall TurboTax. I get an error 1635 turbo tax which says it's a problem of windows installation.  I called TT and they infomed me that I ahd contact microsoft because it is a problem of windows registry that will not allow the program to be uninstalled completely. They said that Microsoft will have a way to uninstall it completely? Who and how can I contact someone who can take care of this. Any help would be appreciated. AIso, I finished our taxes with Info for 3 businesses in this regard will be al that get lost?  Cathy

  Hi cathy_vt.

  Method 1

  See the below Microsoft article and then try step 1, check if it works.

  Error message: 1635 This patch Package could not be opened

  http://support.Microsoft.com/kb/812490

  Method 2

  If the previous step fails, then return the TurboTax link, and then perform the below mentioned step.

  Error 1635: This patch package could not be opened...

  http://TurboTax.Intuit.com/support/IQ/installation/error-1635--This-update-package-could-not-be-opened---/SLN12446.html