Photosmart C4380: printing software

Similar Questions

• Printer: try to connect a HP Mini laptop with a HP Photosmart C4380 printer.

  I have a laptop HP Mini and I have connected an HP photosmart C4380 printer by plugging the cable from the printer to my computer and follow the instructions to install it.
  The installation went well but when I try to print, there is an error message and the file goes on the line (there is no detail on the error).
  Is it necessary to install a CD of the printer before? If so, I never saw... What can I download it from the HP site and if yes, can you me how...
  Thank you very much... Angelo

  Download a Vista driver for your printer.

  Support for drivers &
  http://welcome.HP.com/country/us/en/support.html

  Do not plug your printer when prompted to do so. Must be supplied when you connect.

  I hope I could help

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• HP Photosmart 8230 Printer: HP Photosmart 8230 printer software

  Hello world

  I had to reinstall HP Photosmart 8230 printer but have lost the instalation CD. Not supported by HP more. Someone know where I can get the no?

  Thank you

  Hello

  Thank you for using the forum.

  You can try the following:

  1. Plug in the printer and connect it to your computer
  2. Turn it on
  3. Right-click the Start button, then click on the following text:
  4. Control Panel
  5. Devices and printers
  6. Add a printer
  7. Click the printer that I want isn't listed
  8. Add a local printer with manual settings
  9. Next
  10. Use an existing port
  11. DOT4_001 (printer HP device)
  12. Next
  13. Under manufacturer select HP
  14. Under printers select HP Photosmart 8230 series class driver
  15. Next
  16. Select use the driver that is currently installed, or replace the pilot current (any)
  17. Next
  18. The printer name is click next
  19. Do not share this printer
  20. Next
  21. Print a test page
  22. Close
  23. Finishing

  Hope that helps!

• Photosmart 3210xi: xi Photosmart 3210 printer software to win 10

  Where can I get the all-in-one software compatible with Windows 10?  Print very well, I can't seem to get it tested.  Help, please.

  Hello

  Thank you for using the forum.

  Cannot find the software FULL of features for you on hp.com, so you must print using the-OS drivers.

  Have you tried the HP scanning and Capture of AiO remote control?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Also for a sweep, can you try to open Paint and then try scanning from there?

  

  Hope that helps.

• I'm unable to uninstall HP Photosmart 7280 printing software

  I can't uninstall using the uninstaller shortcut in the start menu or programs and features in Control Panel.  The two methods for result anything happening.  Can anyone suggest how I could uninstall?  I don't have the printer.

  What follows for the 7280 Photosmart of HP Support can help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3204785#N1162

• Error message - system tries to install the HP Photosmart C4680 printer software

  I installed Windows 8 Preview of consumer months ago.  Now, I get an installation error that does not affect the printer - it is fine as it is - and I can't do the install failed mended stop repeat whenever I want to use the printer.

  I'm guessing that the drivers are not compatible with this version of Windows, and the system tries to do a regular update of some sort.  Known issue?  If so, can I disable in order to install so that I'm not tying up of resources all the time?

  Hi CalypsoReid,

  See the following thread: http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-Windows-8-Consumer/m-p/1334287

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• Installation of printer software program did nothing

  Hi, I just bought a HP desktop computer running Win 7 Pro SP1 again.

  Downloaded from the HP Web site more complete sw for HP Photosmart C7250 printer software (released in 2009, Version 13.1.0).

  (1) using the Wizard installation and download of HP:

  The download was successful. After the installation process has started (and after confirming the safety message) the hanged Wizard. The bar has shown 100% downloaded and extraction showed 100% copmpletion, but nothing happened thereafter. No files showed up everywhere and the actual facility never began.

  (2) use an open direct file of extraction: Extraction done, but nothing happened thereafter.

  (3) use WINZIP to open archive manually and start the INSTALLATION. EXE in the folder, but nothing has happened later.

  (4) use compatibility mode, nothing.

  (5) use administrator mode compatible and right, nothing.

  Help, please. What else is more ridiculous than faling to run HP software on HP hardware?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
  http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

  Kind regards
  Shlomi

• Problems with HP Photosmart C4380 wireless via a router from Cisco RV120W

  We recently purchased a Cisco RV120W wireless router and now we can´t connect our wireless Photosmart C4380 printer.

  During the installation process, we get the message: "the can´t computer communicate with the printer on 192.168.0.216. It can be caused by firewallproblems. Check that the 427 UDP port are not blocked in and out of traffic"(translated from Danish).

  If I remove the USB cable and try again, the installation continues and Announces: 'printer found – connected to the LAN' - but in the end: "Printer installation is not complete" - aurgh!

  The report-network printer looks OK all the way.

  Can someone help us we are frustrated.

  Greetings Jens Ove and Helge

  Sorry, but I'm not familiar with this device.  However, I would search in the areas of networks, VPN and security.

  You want to be sure of not having active VPN and also look for implementing isolation.

  This manual can help: http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf

• printer says offline on my HP Photosmart C4380

  I have a HP Photosmart C4380 and I have problems with it being offline. I followed all of the steps this site told me to do and it remains offline. When I run the diagnostic utility program, he is told that he is online and told me everything is ok, this clearly isn't. Does anyone have any other suggestions out there? Please keep in mind, that I'm not a geek so simply word of language very much appreciated! Thank you.

  Hello

  Start by downloading this tool.

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-NDU&JumpID=ex_r4155/HHO/IPG/ccdoc/network_diag/

  Sound network diagnstic tool.

  Let it run and if that said also that no problem, it could be some kind of security software blocking the connection of programs to the printer that it cannot see the status. Let me know exactly what this tools.

• Pomp A60-106: how to print wireless using HP Photosmart C4380

  Good afternoon

  I confess that I am no expert PC but have spent 4 hours this afternoon trying to follow all the help and support options to turn on my laptop to print wireless using my new HP Photosmart C4380.

  Wireless network adapter appears under control panel, but I can't get the light to come on the front by FN and F8, of the any or others 101 things I tried thorugh etc. Device Manager - I'm sure that there is an easy way, but I can't find it and lose the heart! Can someone offer me some ideas?

  If so please have them step by step so I can make sure I don't miss anything.

  Thank you in anticipation of your ideas...

  Rachel

  Hello

  I'm sorry if this seems a silly question but first:

  Are you REALLY sure have a wireless card installed?

  And the second question:

  Do you have already turned the switch on "ON"?

  Because otherwise, the light will NEVER go up.

  Please give feedback if you tried to change the pit wireless switch 'ON '.

  Greetings

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• Cannot scan with my Photosmart 7510. Installed any printer software

  Windows 7 64 bit

  After 10 hours on the phone with HP support, service Cloud and a HP escalation Manager, I can do everything except Scan.

  After that the escalation of HP Manager allows a 'scrubber utility' to completely remove all previous, all HP printer software now runs on my printer except SCAN.  From the printer control panel, it says: "make sure that the HP printer software is installed.  Since the PC when you select the HP Scan utility, is said: "HP Photosmart series 7510 not found '.

  Help please!

  This has been fixed by a HP escalation Manager today!

  Apparently, when windows is an update of security for your computer (Windows 7 in my case), it disables the ability to scan your printer because it doesn't recognize as valid a device on your wireless network and disables it so.

  We had to reinstall the printer as a new wireless printer and then 'activate' it as a scanner.  After having done that, you should have a background running which is called, "HPNetworkCommunicator.exe" process Now, I can scan the computer, as well as from the control panel of the printer.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.