I need this laptop wireless connection to my office wired printer. How

Similar Questions

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• I have a Toshiba laptop w/windows 7 & a hp 1610 printer, how can I ink ck levels?

  I have a Toshiba laptop w/windows 7 & a hp 1610 printer, how can I ink ck levels?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Two years trying to get Toshiba laptop wireless connection works

  I tried for two years to try and get the connection Wireless on my Toshiba laptop to work without much success. For a short period I managed to connect the laptop to a desktop computer's ad-hoc wireless and share the internet connection in this way but then it stopped working.

  I have a Toshiba Satellite Pro U400 - 15L model no PSU45E-00J005EN. It is with the 12.1 "screen and running Windows XP Pro sp3.

  My wireless switch on the front of the laptop is turned on. It is also activated in the software Fn F5 wireless enabled, disabled bluetooth. I don't have Intel ProSet.

  Already when I was able to establish an ad hoc connection using microsofts software. I had to manually activate the Wireless Zero Configuration (WZC) whenever even if, as he always began with disabilities or order even if I set it to start automatically. It is a monumental PITA.

  When I try and connect to the ADSL wireless router (Belkin N150) using the Toshiba Software, I get the message error "application from another provider is controlling the wireless adapter.

  I get all the time, even though I turned off Microsoft Wireless Zero Configuration (WZC).

  I thought that Windows controlled always somehow it even though I disabled WZC, so after reading solutions in other posts, that I tried to go...

  -> Control Panel-> network connections-> wireless-> properties-wireless networks tab > uncheck "use Windows to configure...". ».

  But unfortunately there is not 'the wireless networks tab' in there, all I have is the other two tabs. And since trying to use Toshibas software to connect wireless using their Radar thing, now when I click the wireless network connection in there the message "Windows cannot configure this wireless connection. If you have enabled another program to configure this wireless connection, use that software. »

  Can someone on the forum or using Toshiba please?

  Thank you

  John

  Two years? Sorry, but I can't believe it.

  If everything is Ok and I mean if there is no hardware problem you n t need more than two minutes for the WLAN configuration.

  As a first step, you must be sure that the wireless network card is installed correctly (Device Manager).
  Wireless network card must also be enabled correctly (switch > check FN + F8 > check ConfigFree tool).
  When the wireless network card that it is correctly enabled scan (check the status of ConfigFree) the area with RADAR option in ConfigFree.
  You will find this option?
  You can scan the area?
  Some WLAN is visible for your laptop?

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• zd7020us - wireless connection is disabled - can not find how to enable it

  laptop computer (large) zd7020us... Operating system: XP pro.  Drive hard hase been replaced twice.  Wireless, used to work to find the last time that it was used.  but, it need not for a long time and hard drive past and reloading the operating system, it did not work now for a long time.  message I get when I poke the wireless power button: map your 802.11 radio network is always disabled. Use the radio control in wireless network utility to enable it. "* I HAVE downloaded all the files to update from HP for this computer and installed right after installnig the BONE when the drive has been replaced. * I HAVE been at network connections, "Wireless network connection" - and all that I get the window int is - "Windows cannot configure this wireless connection"...  If you have activated the anither program to manage this wireless connection, use that software. "I've been to the Services section and activated ' Wireless Zero Configuration (WZC)... but there is nothing for... so... now me what?  Thank you... I hope...

  Hello testrat.  I understand that a problem the reactivation of your wireless card.  Is this correct?

  The error message that you received on another utility used to configure the device is probably the cause of your problem.  This looks like a software application to manage wireless connections is your wireless card hostage.  You will see to set Windows to control the connection.  You will need to determine what program is currently set to manage the wireless.

  I'll need to go to the Add/Remove programs in your control panel section.  Sort the list by name and look for anything with the name of 'Intel' or "Broadcom."  What do you see that these two brands are concerned?

  I'm waiting for your answer.

• Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180

  
  

  • Description of the problem - unable to connect to the printer, unless you restart printer
  • -Printer HP Photosmart C3180 all-in-One Printer model
  • (Including service pack revision) operating system - Mac OS X 10.6.2
  • -Wireless connection method
  • Error - could not connect. Photosmart C6100 series (C8897C) is currently unavailable. Please check is it is on and connected, or try again later.
  • Using the latest version of the drivers for HP 2.3 Apple updates and the latest version of the bundled software HP 4.4.3 utilities.

  I was able to solve the problem by reading the comments of others and came across the solution.

  By turning on the printer press and hold keys # and 3 which resets the printer as a warm reboot. Hold the keys down until the main menu appears on the screen (it took awhile so be patient).

  Return to the Mac and remove and re-add the printer via system preferences > printer and faxes (-/ +). However, there is no need to restart the printer twice until it was added back successfully.

• I need my laptop to connect to two wireless networks in different times.

  Help! I have a laptop Vostro 1500 that I bring to work and he need to log on to the network wireless to work.  I also have a wireless home network and have it automatically log this one as well.  I can get it to work properly on a network, until I have to log on to the other network.  Then he opens a session on the homepage of 2? or 2 working.  It's a real pain, because then I have to cross and re configure it once again.  Is it possible to just connect the existing network?  My laptop runs Vista Bussiness and other workstations on two XP pro media.

  
  

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• wireless connection (WRT300N) to the wired router (BEFSR41)

  itself...  I have nice small router 4 ports and a WRT300N that I attach to the router.  Looks like it should be 'easy' but it is not just plug n play.  I'm not an expert... probably the WRT300N must be differently configured when it is connected to a router if it was connected to the cable modem.

  Help is greatly appreciated.  Even if it's just a pointer to info - I don't mind doing my homework, but can't find anything about it in any documentation that I ran across.

  BTW, we have a good reason to not simply use the router without wire, so no need to think that, thanks...

  See my 23:00 04/11/09 post at this address:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=Wireless_Routers&message.ID=153670&q...

• HP2540 all-in-one printer/Scan: wireless connectivity cannot be maintained for printer HP2540

  Printer worked fine using my own home router for 2 years. HP2540 printer - firmware Rev. CP1FN1333AR. OS 8.1 win has recently switched to the service where the ISP of router and printer will not retain any connectivity beyond a single print job. Have 1) reset printer and a router using the low power - several times 2) confirm last HP printer updates are on printer, HP Scan Doctor) 3 performance s/w and connected via USB cable to load new network settings) 4 "uninstalled" and resinstalled on PC and network 5) correctly printed Page of HP Network Config after installation wireless. " Connectivity, then abandoned and doctor Scan indicate "no connected printer" and refers to the USB and wireless install routines, which none has solved the problem.

  All net settings (IP addresses of printer, gateway etc. look OK, SSID matches net name, intensity of the GIS is correct, channel 11 assigned.) Bottom of the Gen section' of the page information HP Net Config says Internet 'Not connected' and a warning "Web Services require the printer in order to have a connection with an Internet connection. I try only to print local PC docs generated however.

  Are passed by the majority of the section of HP at the URL - http://support.hp.com/us-en/document/c02790693 for this printer, which a large part is indicated above. Any suggestions?

  Have you tried using a different channel on the router?

• My wireless connection is displayed as not secure, how do I fix?

  Original title: security problem
  connected to a linksys 2 but my security type is secure and I have no idea how to do to fix it. What can I do?

  This forum is for Microsoft Security Essentials.

  For additional assistance, contact Linksys.

  http://homesupport.Cisco.com/en-us/support?ICID=Cisco-home-products-HN-mm-support

• my daughter forgot the password on this laptop, and now nothing can be upgraded. How do I change and reset the password

  computer is without hope, without updates

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/

  Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• Photosmart C310 with wireless connection with MAC does not print

  Status, connections, power in ink, etc. everything is OK.  State indicates point printed but paper or envelopes come out blank.

  Remove all the cartridges, remove and reinsert the printhead Assembly.

  Turn the printer off and then back on, and then insert the cartridge when the printer prompts to insert and check to see if that can help you.

• Problem with wireless connection on Equium L350

  Hello

  OK, today I went and replaced my L350 which was stolen by a replacement. Previously, I could set up my connection Wireless in a few seconds. Now, I can't.
  As far as I know, nothing has changed with my Sky router, wireless devices can connect to perfectly.

  One thing I noticed was that when I press the FN, I have no F8 option, it goes directly from F7 to F9. I've never had to set up my wireless with these keys FN before, so could I have a slightly different model without knowing?

  I get a light orange next to the switch Wi - Fi on the front, but only when really close to the router. In addition, it turns off when the laptop is put into mode 'sleep' or the lid is closed, something that never happened with my old versoin.

  Any help greatly appreciated, esp that I need this laptop for my degree.

  To be honest, it's very strange question. If your laptop is preinstalled with Image Recovery (factory settings), everything should be OK.

  What is the status of WLAN card in Device Manager?

  BTW: light orange compatible WLAN Card has nothing to do with the distance to the router and it is logical that, after switching mode standby WLAN led is OFF.