I2C extract script read error of data-301705

Similar Questions

• Read error - SOLUTION system configuration data

  Today, I found a solution to the error of notorious boot not only on the toshiba, but some other brands also.

  The error is: System configuration data read error.
  He invites to start with 2 beeps which prevents the computer laptop Moldavian from.

  I tried everything I could to remve this message but noything helped me.
  Replace all, cmos battery, updated the bios, loader, drives, keyboard and etc.

  Today, I found a solution very simple that I want to share with you guys.
  This solution worked for me and I hope it will work for you too.

  Are you ready? :)

  Go to the Bios and change the Bios language french.

  Post here if it works for you also.

  Thanks for sharing your experience with us. But its really hard to believe that your solution would be linked to all devices such problem

  However, good to know that this small change in the BIOS has helped you to resolve the issue

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving the Manager does not work, can you please help me. Thank you

  Hi, after all stages of extraction of data from oracle to oracle during the execution of command "start extract ext1" his error giving this handler does not run both source and target, can you please help me. Thank you

  Hello

  The setting should be as below, and not only the port number should be...

  PORT 7809

  Kind regards

  Veera

• How to fix the error "insufficient data" in Acrobat Reader 11.0.04?

  How to fix the error "insufficient data" for Acrobat Reader 11.0.04?

  Hi Johnkel1524,

  Please visit: http://helpx.adobe.com/acrobat/kb/insufficient-data-image.html

  Also, try to update on 11.0.5 and check.

• error in one of the scripts of mover of data during the installation of campus solution

  Hello world
  This is my first attempt to install one of the products of peoplesoft
  I install HCM 9.0 on windows 2008 64-bit, oracle 11g
  I am now in task called a 7-16-9: PeopleTools system data update
  I ran pt849tls.dms with success
  but pt850tls.dms failed with the error:
  
  File: Data error MoverSQL. Stmt #: 0 error Position: 25 back: 904 - ORA-00904: "PT_RETENTIONDAYS": invalid identifier
  Failure of SQL stmt:UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS = RETENTIONDAYS
  Error: Error execute SQL for UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS = RETENTIONDAYS
  
  Is there a script that I missed?
  I followed the instructions step by step
  Thanks for your help,

  Did you run the sql script generated by the generation of project successfully (it is not rel849un.sql and rel850un.sql either)?

  Nicolas.

  Published by: Gasparotto N on April 12, 2010 11:36

• Qosmio G20 - extraction of the error failed THotkey

  Hello

  I have a Toshiba Qosmio G20 at the opening I have a message

  Extraction THotkey failed
  Error code 0 X 00031402, 0x00000002

  I click OK, the window disappears

  I read the topics for this pb
  I ran the antivirus
  I ran Spybot
  I created a shortcut in the menu start THotkey.ex: negative
  I found msconfig that nothing works
  I did 2 restores system to 2 different dates: nothing works
  In addition to what this THotkey?
  Anyone have a solution?
  Thank you

  Hey,.

  THotkey file is the driver for the FN keys on your laptop. I think that it s the Toshiba Hotkey Utility that you can download on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Then check out the page and reinstall Hotkey Utility, it should work. :)

• read/write of data from forms (pdf) adobe livecycle xml

  Hello

  I need help reading the xml data in a PDF file created by Adobe LiveCycle and also writing of xml data in the form.

  The forms have been created using PROD LC 8.2 and in the future they will be created using PROD LC 9.5.

  I use VB .NET to access data programmatically.

  Can someone help me with some advice? A SDK library? Any information would be very useful.

  I'm quite new with this problem of electronic forms and I don't know even where to start.

  Thank you

  Ionel

  OK, I understand what you mean now. I did a similar thing about 4 years ago.

  See this thread:

  http://acrobatusers.com/Forum/forms-LiveCycle-Designer/how-extract-LC-form-fields-values-a nd-store-them-base of data.

  and also this thread:

  http://forums.Adobe.com/message/1157969  (read until the end. This is mostly trial and error until I found the solution, which is described above. It will give more information.)

  It has most of the reuqirements you are looking for. If it is close to what you are looking for, I can download the complete source code in my workspace to Google. Plesae let me know.

  I hope it will be useful to you.

  Tarek.

• Equium A200-1VO - "a disk read error has occurred."

  Hello

  I had my Equium A200-1VO since December 2007 and has never really had any problems with it atall.

  However, last night after a Windows Vista update and restart, my laptop won't start upward. I get a black screen announcing:

  "A disk read error has occurred.

  Please press Ctrl + Alt + Delete to restart»

  I've had no BSOD, and no other suggestion that something was wrong, everything worked perfectly. I checked the HARD drive to see if it had come off his link and reinserted it. But I get the same message.

  I am presented with the only possibility to use the recovery disk, but this means wiping everything out there and start again. I'd rather try to recover my documents before taking radical measures, if it is possible atall.

  If anyone has any suggestions I would be very appreciate.

  Thank you very much

  Mark

  Equium A200-1VO
  -Numtxpackets® Pentiuma® Dual - Core Processor T2310 - genuine Windows® Vista® Home Premium Edition - DVD Super Multi (Double Layer) in car-2 048 (1 024 + 1 024) MB of RAM (667 MHz) - 15.4 "WXGA TFT screen 1 280 x 800

  Hello

  In my view, the error message says a lot: theoretically, your HARD drive may be defective and must be replaced but before that I would test using fitness to drive or another program. Just use Google to find such programs.

  Maybe something was tangled up in your Windows installation. About reinstalling Windows?

  You didn't back up your data to a second drive? I m wondering about this, because the backup should always be made.
  However, if you use an external HARD drive box you can save it on another computer.

  Good luck! :)

• Satellite M40 does not start from hard disk - read error

  "I push the button - briefly see the In Touch with tomorrow TOSHIBA screen - then ' + a disk read error occurred press Ctrl Alt Del to restart +".

  I control alt delete brings me briefly on the screen TOSHIBA where I can choose either F2 or F12.

  Do I need a startup disk and where can I get one in order to boot from the CD ROM?
  Do I try to get into the Satellite M40 product Recovery DVD-ROM - this concern for me as the hard drive will be reformatted and all data will be lost.

  I'm stuck please help!

  Hello!

  If you enter the product recovery disc, Windows will be relocated and will be erasing all data on the HARD drive.

  I think that your HARD drive is damaged. You can check this with the Drive Fitness Test. Here you can download:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  By the way: you can save the data on the HARD drive, when you put it in a box external HARD disk. Then you can save the data on another PC, if the HARD drive is ok and have no errors.

  Good bye

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Read error-getdatatype TDMS

  Brief history on my project.  I have a PXI system configuration to read signals from DSA devices, Series S, and an encoder.  I use matlab to make calls to functions in libraries NI DAQmx and nilibddc.h.  I collect the data and the flow of data on the disk with the ability to view data during the acquisition.  Acquisition occurs for almost a minute plus 37 channels to 100ksamp/sec.  So the. TDMS files are quite large.  I synchronize my systems by some sort of configuration of the hybrid master slave device.  I use auto-sync in all types of similar devices, and to synchronize the different types of devices, I use the sample clock and start to trigger a DSA device to synchronize my other devices.  Since I use the automatic synchronization of the. TDMS files can have anywhere between 1 or 20 channels in a single file.  This makes a very large file and Microsoft Excel import does not cut because of the limitation on the size and the time it takes to load.  So I use the nilibddc.dll to read data from files which seems to be fairly smooth so far. I did not attempt to read a file with a minute of a data value but the worst case I can read the data file chunks at a time so I'm not terribly worried about it.  My problem occurs when I read my file data .tdms containing my encoder data.

  The part where it inhibits is is my function calling for DDC_GetDataType.  Now when I use my code to read data from the analog .tdms file it works well and does what I want it.  The error I get for my counter of the signals is an error unexpectedly (-6204.)  Now what is interesting is when I use labview 2009 on another computer, I can read the files without a problem.  I'm guessing that my labview 2009 uses different libraries however.  For example, when I read the file in labview, I go to the range of functions, choose file/o, PDM in streaming and use either read the .tdms or PDM Viewer function.  When I'm on my main computer, I use a call to the DIAdem connectivity library, that I downloaded from OR. Microsoft excel importer also seems to be hung in the same place (getdatatype).  I found this to inspect the log file, it creates when I try to read it.  Any help would be appreciated.  I have attached the error log I get the .tdms microsoft importer.  I've also attached a sample file .tdms with the position of encoder in it data.  If trying to open outside of labview, don't be fooled if she tells you that there is no data available.  It is, by using labview 2009, you can read all the 500ksamps without problem.  Using PDM viewer or reading tdms atleast.  Thank you.

  Hello-

  I wanted to preface what follows with the fact that I assume that you are using the TDM C DLL downloaded here.  If this is the case, the following should solve things for you - if not, please let me know where you got the ddc library of.

  Unfortunately, the TDMS dll which is downloaded from the link above is a little outdated and contains the bug you reported.  I created an internal action query to update the download with the version the most recent available to us.  In the meantime, I have attached the tdms dll needed to solve the problem for you.  You should not use the attached dll to replace the dll in ".\Dominonilibddc\dev\bin\\tdms_ebd.dll".

  A potential problem here is if you use the merge modules included to redistribute your product.  If you are, we will need to get some updated modules as well merge - please let me know if this is the case for you and what is the level of urgency.

  Please let me know if this does resolve the problem for you.

  Thank you-

  NickB

  National Instruments

• LiCor series - hex 0xBFFF006c read errors

  Hi all

  I tried these last days develop a series VI to read the data of a 820-LiCor-CO2 gas Analyzer. I know what is sent to the device to a request to send data to the computer and how to analyze these data once it gets in return. Its manual settings are Baud: 9600, data Bits: 8, parity: None, of Stop Bits: 1 and flow control: No.  I had problems with the hexagon-0xBFF006C "a time-out error occurred during the transfer. A character not read in the material before the next character arrived. "In the database read/write vi provided with labview, this error occurs each time series. In mine, I joined, I would get this error once every nine or 10 times by operating once every time. Sometimes the error would be to present the first time that I pressed the race, but after I click OK, the next run will work fine until about the tenth times.

  

  Does anyone have any idea why this could be implemented? I really just need to be able to read the pressure, temperature and CO2 with precision as well as several times without problem.

  Thank you very much!

  Ok. So I solved my problem with a co-worker, but he had a miserable time. I think that the VI attached work a LiCor-820. I think that you can fix the buffer problems of overflow to everything in a while loop with an error handler. Basically, the error handler can prevent display errors, and at the same time, it can also make a stop or continue the condition for the while loop. I chose to continue after deletion of the read buffer until it wasn't a mistake. I took a loop because the data on the first launch is usually just a partial reading of the data set is past the LiCor. I know that this probably isn't the most elegant solution, but it works for this situation so far.

  Thanks for the comments and suggestions of each.