iDrac could not be upgraded
Hi all
I got the following error trying to upgrade to iDrac7 OME iDrac6:
Results: Download packages. The method call InstallFromUri to download packages to iDRAC Download Package: ESM_Firmware_G6N28_WN32_1.97_A00. EXE on the Download Package iDRAC started successfully and the Job ID is JID_001407331297 the URI given to iDRAC to download it from: http://ipAddress:port/install_packages/Packages/ESM_Firmware_G6N28_WN32_1.97_A00.EXE
Checking the status on the following tasks: JID_001407331297 The JOBID JID_001407331297 failed with the following message: package verification failed. MessageID: RED007
Download error occurred. Package ESM_Firmware_G6N28_WN32_1.97_A00. EXE to download on the device target. Update failed. The task of software update failed.
What is a port issue?
Thank you
The upgrade of iDRAC6 (physical to the snap card) at iDRAC7 (welded as SOC on a mobo) is not possible via a firmware update. Please specify.
Tags: Dell Tech
Similar Questions
-
Hello
I have Windows server 2003 I have the server license terminal server, but one of my XP machine, which I'm calling his error remote desktop by giving as below
The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp.Thank you
Deepak Labonté.Hello annelabonnote
Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
-
PrecisionHDMC camera could not be upgraded
Hello.
We have replacement camera failed on SX20 with a 'new' using the RMA procedure. It comes with FW FINAL S01777 - 2.0 (released in TC6.1).
Codec has already last TC7.3.4 FW installed and after connecting the camera, she starts to upgrade (30-40) and cycling permanently in that State. Do we not have to downgrade the first to TC6.1 (TC7.1) to switch to the last camera FW?
Thank you.
Marcel
The camera must be able to upgrade, see nothing in the release notes which mentions that you have to upgrade in a way. However, you might want to try and get off at TC6.3 when the next version of the firmware came out and then move on to software TC7. If for some reason you can't get the camera to upgrade at all, suggests you reach out to the TAC engineer you transformed your RMA and it can help or submit a second RMA.
-
could not activate iPad2 after upgrade to iOS 9.3
could not activate iPad2 after upgrade to iOS 9.3
What error do you get?
-
Satellite P300 - upgrade Windows 7 could not be done.
Hello
I have a problem to upgrade Windows Vista Edition family of Windows 7 Home Edition 64-bit. I followed the upgrade process includes the 3 parts of the Guide to upgrade Windows. Part 1 was successful, but when I was doining part 2 (insert the Microsoft Windows 7 upgrade DVD) I get an error message upgrading to 64-bit could not be done.
Now, I have installed Windows 7 with 32-bit on my E: partition. But this isn't what I want and what it should be. I want to update my Windows Vista 64-bit Edition of Windows 7 Home edition 64-bit, and then I want to buy an upgrade to Windows 7 Professional 64-bit.
My laptop model must have a BIOS update?
Laptop: Toshiba Satellite P300-23F PSPCCE-06T03HGR model numberPlease help me in this case.
Hello
Do you find more infoarmations why the upgrade couldn't t do?
On the Toshiba site I found a upgrade step-by-step instruction that might be useful:
http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htmAs you can read that some programs must be removed before the upgrade. Did you do that?
-
Upgrading to Windows 7: compatibility of the device data could not be loaded
I tried to upgrade my L300 (and otherwise my P300) from Vista to Win 7 with two DVDs of upgrade provided by Toshiba end 2009. I followed all the instructions, as to recover the system to the State of delivery, deletion of outdated drivers and install new drivers with the DVD driver. But when I insert the Win 7 DVD and start the installation, I soon get the following (originally in German) error message:
"The device compatibility data could not be loaded. Error code 0x1F.*.
German support Toshiba could not answer my question so far, then I wonder what is the problem and how do I get my installation is going. It's kind of frustrating after paying for the upgrade DVD, but the installation does not work.
Thanks in advance for any help on this error.And after a year using it for the first time now, right?
-
Since 12/08/10 I could not successfully install an upgrade (update of security for WORD 9, # KB2092914.) Six times I haveEncountered Unknown Error Code 646. Any suggestions? I have Windows 7. Thanks you
Hello
It is a Microsoft Fixit who will help with this issue.
You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
Office updates
http://support.Microsoft.com/kb/2258121Check this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b
------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I have just upgraded to Windows 7 Pro. Could not find the normal system of games (Solitaire, solitaire spider, mine sweeper, etc.). Where are they?
Go to control panel > programs and features > turn Windows features on or off and place a check next to games and click OK. Carey Frisch
-
Original title: suddenly Windows XP does not open
After using the computer someday, he would not start the next time I lit. Windows tried to start but failed and went to a black and white screen saying windows could not open possibly due to a hardware or software upgrade and invites me to try opening windows normally, safe mode, using the last well-known congig, etc... Every choice has ended up doing the same thing, windows tries to start and end up back in the black and white screen.
Hi Brian,.
1. you receive messages or error codes?
2. did you of recent changes on the system?
You can read the following article and check if it helps.
Computer stops responding with a black screen when you start Windows XP
Hope this information is useful.
-
Original title: computer locked up on upgrade to xp p2.
I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer. I tried safe mode, but it kicks me back to the same screen
Hi jodyjones,
You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.
Reference: installation of the Service Pack 2 (SP2)Hope the helps of information.
Please post back and we do know. -
Original title: Upgrade Vista - 7 and issue of Bitlocker.
I'm upgrading stops priocess Vista-32 to Windows 7 family 32-bit and upgrade when checking report of compatibility as a result of the error message following: "implementation could not determine if BitLocker Drive Encryption is in use.
I have established that my Vista is not only encryption, so I can't turn it OFF... it's weird I had myself far enough in before upgrading... always new problems affecting it right back
Hello
I suggest you try the steps suggested by Andre Da Costa replied on March 27, 2010. From the following link:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-determine-if-BitLocker-Drive/7be7ac98-5e73-49e5-9636-179cf7b11b23See also: What is the difference between disabling BitLocker Drive encryption and decrypt the volume?
-
I tried to download the upgrade from Vista to Windows 7 (32 bit) and get the following message is displayed.
"The file could not be verified."
Please directly contact the Microsoft Store.
-
original title: problems of Windows update/upgrade
I'm currently trying to install Windows 7 on my desktop running Vista.
Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.I already put the virtual disk on auto and rebooted several times. I get the same error.Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.gain, I restarted and it still does not work.I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).Help!
First, run Windows 7 upgrade advisor:
Windows 7 Upgrade Advisor
http://Windows.Microsoft.com/UpgradeAdvisorNote the results and make sure to follow the steps.
Try to install Windows 7 using the USB
Install Windows 7 with a USB memory key
http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key -
I tried the upgrade to the new version of JAVA kept b/c getting reminders... uninstall the older versions (2)... réessayées... got the following error code: "Error 1606. Could not access network location % APPDATA%\ ». I tried of looking for help on the Java site. and I tried a few suggestions listed... no luck! CAN SOMEONE PLEASE?
Thank you!
gasweetpeach54
The usual reason for this error message, it's that some of the registry entries mentioned in the following items are damaged.
http://support.Microsoft.com/kb/886549
http://support.Microsoft.com/kb/2258121
If you are unable to fix it by using these methods, try to create a new user account, give administrator privileges and use it to install Java.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type
-
I have a laptop Dell Inspiron 1505, that is running Windows XP Media Center Sp3. I'm doing a place in upgrading to Vista since the disks to upgrade Dell... Everything's fine until the 'Expansion of the files' [27%], then the installation fails with this message: "Windows could not update the configuration to start the computer. Installation cannot continue. Any changes made to your computer during the upgrade". I did a google search for a fix that involves changing a value in the registry in the HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E976-E325-11CE-BFC1-08002BE10318} for example change the value to PartMgr Upperfilters. Unfortunately, this value was the default for my registry key changes could be made. Some other fixes involved the renaming of Upperfilter.bak, for Upperfilters unfortunately this .bak value does not exist in my registry.
I tried to boot from the disk of Vista and changing the msconfig for a selective startup but without result.
In addition, the stall even appears at a similar point when you try to upgrade to Windows 7. Is it because of the presence of hidden Media Direct and Dell restore partitions? Compatibility Assistant programs for the two operating systems found nothing significant. Anti virus has been disabled during the installation procedure. Any help will be greatly appreciated. Thank you.
Hello
Not quite, but pretty close. Media Direct could not lock the boot sector. It must be a BIOS lock or a mechanism of protection provided by your antivirus software. Given that, I would check your program settings then for all that prevents changes to the boot sector. You may find more easy just uninstall it and reinstall it after the upgrade. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
-
10 the desire: desire 10 cannot adjust the print size after installing new cartridge
After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but
-
my screen is sideways (thanks to the cat). Does anyone know how to fix this? Never seen anything like this before. Thank you!
-
I have a HP Color Laserjet Pro M177fw MFP multifunction printer. When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up. My MacBook Pro will see the printer (I'm wired to i
-
Resources for Java experts but beginners C++?
Can anyone recommend a good book or online resource that presents the C++ to Java developers? I'm looking for a "quick start" tutorial that can highlight the differences between languages and help me avoid various pitfalls.
-
HelloWe went from ten nodes using the same ISO upgrade, 'len_sw_hyper_2068190_vmwaresx5_32 - 64.iso' Lenovo.Five nodes have been upgraded by booting from the CD.Five nodes have been upgraded using VMware Update Manager.The updated nodes at level usin