IE3SH Application has stopped working any ideas please

Similar Questions

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• CTXfiHlp MFC Application has stopped working

  A small window opens when I log on Windows 7. The title is "CTXfiHlp MFC Application has stopped working". I close the window, and everything seems to work perfectly. He did this a certain time and I decided to try to find a way to get rid of him. I have given my response above, and perhaps figuratively it's Sound Blaster so I tried to update the drivers, but Windows says they are up-to-date.

  Here is the text of the detail section:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Ctxfihlp.exe

  Application version: 6.0.1.1348

  Application timestamp: 4c3473fc

  Fault Module name: ctxfispk. DLL

  Fault Module Version: 6.0.1.1348

  Timestamp of Module error: 4c3473fd

  Exception code: c0000005

  Exception offset: 00003 74 d

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Share your Creative Audio/logiciels drivers

  Any update of the driver would be obtained from the hardware manufacturer and not windows update

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• Satellite L300-1AQ - Bluetooth tray application has stopped working

  When I put my laptop it comes up with an error that says:

  * bluetooth tray application has stopped working *.

  A problem has caused the problem to stop working correctly.
  Windows will close the program and notify you if a solution is available.

  Anyone who has a solution?

  The laptop is a Satellite L300 - 1AQ
  Didn't it monthly!

  Please help, thanks

  XX

  Hello

  Have you tried to reinstall the battery Toshiba BT?

  Usually, this will help you get rid of this error message.
  Here you can download the new BT stack:
  http://APS2.toshiba-tro.de/Bluetooth/

  First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

  Good bye

• Want to m6: Catalyst Control Centre: host application has stopped working

  Whenever I start my computer, I get the following message every time that a few months:

  "Catalyst Control Centre: host application has stopped working".

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Please how can I get rid of this or get whatever the problem is solved?

  Thank you.

  Hello

  Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• Issue of satellite A300 Catalyst Control Centre - host application has stopped working

  At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

  Has anyone else with similar problems.
  I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

  Any suggestions?

  Hello

  I googled for this error message and found many people having this problem.
  It s not related to the laptop, but for the driver
  Who knows why.

  In any case, in most cases the people solved this problem by the new driver Catalyst installation.
  You should do this;

  -upgrade your Vista to the last State
  -remove the old system catalyst
  remove/uninstall the graphics since the device manager driver
  -Restart the computer and reinstall the driver and catalyst

  Should work!

• "Userinit logon application has stopped working".

  I have Vista Home edition Prem, and be recetnly when I start the computer, the ERROR "Userinit logon application has stopped working".  There is a similar question to this topic, but it was useless.  Assistant would be appriecated.

  Thanks

  Hi Marcosball21

  Welcome to the Microsoft Vista answers Forum!

  This problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest measures are:

  Start the computer in safe mode and try to make these changes in the registry:

  Important: The instructions below contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  1. how to back up and restore the registry in Windows

  i. log on the computer as an administrator or by using an account that has administrative permissions.

  II. start the registry editor. To do this, click on start to reduce this top, type regedit in the search box and press ENTER.

  III. click on continue.

  IV. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  v. in the right pane, right-click Userinit, then click on modify.

  VI. in the value data box, type drive: \Windows\System32\userinit.exe and then click OK.

  Note The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  VII. close the registry editor.

  Link check: when you try to log on to a Windows Vista-based computer, briefly, you receive the "Welcome" message, and then logged on http://support.microsoft.com/default.aspx/kb/929825 if you are unable to start the computer in safe mode and then start from the Vista DVD and the Editor window registry opened the command prompt. Follow the steps

  i. Insert the VistaDVD Windows and restart the computer.

  II. When you receive the following message appears, press a key:

  Press any key to start from the CD or DVD.

  III. define the following preferences and then click Next:

  o language to install

  o currency and time formats

  o keyboard or input method

  IV. click on repair your computer and select the operating system you want to repair, and then click Next.

  v. in the recovery option, select command prompt

  VI. in the type of command line in Notepad

  VII. in Notepad, click file, select open

  VIII. Select drive c:

  IX. Select all files

  Select Select regedit Windows x.

  XI. right-click regedit and select open

  Back up the registry and follow step 1

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "CCP registration Service server application has stopped working".

  For two days I received the following error message: "check of the CDP server application has stopped working". I reloaded the software (after research, it seems to be one of my suppliers of USB) and still get the message. Someone at - he a clue as to what then? I am still under Windows Vista 2007.

  Hello

  What software you have reinstalled?

  Perform the clean boot and check:

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

• Catalyst Control Centre: host application has stopped working disk failure / hard

  recently started to receive some ' catalyst control centre: host application has stopped working "or messages, usually, I get this message twice. When I started to get this message that I also had another saying of warning that there was an error with my drive hard as it had been corrupted, I think he said something as a "write-back" error message appeared, and I have since then lost most of my desktop icons, pictures, all my music files that I have composed and written , any word docs, etc.

  I tried a virus scan first, defragged my hard drive and tried some system restore points and was able to recover some, not all, desktop icons and my experience, but that's all. all my files are gone, I don't know if it's two separate issues or both part of the same issue, but I would like any info or suggestions on how to get my files back. I've saved over 2 years worth of music that I wrote that I really need to come back! Thanks for all comments and advice

  I just had the same thing happen. lost a lot of files. most is saved but we just moved and my backup HD are still packed. seems that there is a major conflict. check the file sizes in the main files, they are big like my files are there, but when I go down the root more that they are not and the file sizes in these folders don't add to the main folder above? I hope they are just invisible but recoverable. anyone with recommendations. I installed the mechanic system and my machine is stable again, but I get the error messages for the catalyst Center control and the dell support center. There may be a conflict between the 2 programs

• My wordpad windows application has stopped working! How to operate?

  My wordpad windows application has stopped working! How to operate?

  Hello

  Thank you very much for your answer and I appreciate!

  I had the right solution and what I did, I uninstall the doPdf 7 then try to install another driver and now it works... all my Word files are now easy converts to PDF!

  in any case, what is the meaning of the PDF? What is PDF-Protected data file? Am I wrong?

  See you soon,.

  Mirasol

• LUpdate Application has stopped working Windows Vista starts.

  Original title: LUpdate application error

  At the start of my Vista laptop it comes up with an error that says that lupdate Application has stopped working.  How can I get that back to work?

  Thank you

  Hi Revbob,

  1 did you recent hardware or changes to the software of the system?

  2. are you able to boot into normal mode after receiving the error message?

  If you can boot into normal mode, you can try to perform a clean boot and see if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• "Repair of system application has stopped working".

  Hi, I'm hoping to get help with an error message that suddenly started appearing on a regular basis. In recent days, the following message if poster every time that I turn on my computer, before that I even click on anything whatsoever.

  Repair of system application has stopped working

  
  

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: UpdateMonitor.exe

  Application version: 4.20.729.0

  Application timestamp: 488e9107

  Fault Module name: StackHash_e52f

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: e52f

  More information 2: e98dfca8bcf81bc1740adb135579ad53

  Additional information 3: 860f

  Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635

  No matter what I click 'close' or 'check online for a solution (recommended)', the dialog box WILL NOT GO AWAY. I was going to do a system restore, but I have only two restore points and both are from today, so that obviously is not going to help.

  It drives me crazy and I don't know that this is not a good sign for my computer either. Help, please!

  Thanks in advance!

  -Renata

  
  

  Hello

  You use a Lenovo computer?

  updatemonitor.exe is an application of Lenovo.

  I suggest that get you in touch with the manufacturer for a better support.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• SPCSCM MFC Application has stopped working.

  SPCSCM MFC Application has stopped working. A problem caused program stop working. Windows will close the program and notify solution.
  Please what is and how to fix it. Pop Windows comes back with no. Solutions.  Please help me. I am a novice to the computer and it's my first laptop.  Thank you so much

  Hello

  The application is your Sprint mobile broadband Launcher. You can try to uninstall and reinstall the application in case it is damaged.
  Go to control panel, click programs and features. Scroll to find the Sprint Mobile Broadband Launcher. Highlight and right click. You can choose to uninstall. Access the site Web of Sprint, then download the program again. Then right-click on the configuration file and, select run as administrator.

  This should get is successfully installed and see if you still have problems with the termination of the program.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think