Illustrator CS3 crashes after upgrade to Yosemite

Similar Questions

• Illustrator CS4 is no longer present in preview fonts in the character palette after upgrade to Yosemite... Help, please

  Illustrator CS4 is no longer previews of fonts in the character palette after upgrade to Yosemite

  Help, please... Thank you
  

  Got a solution guys. The new transparency is the problem. Go to System Preferences > accessibility, and select reduce transparency. It should work.

  

• Boot Camp has stopped working after upgrade to Yosemite

  Hi all

  I also lost Boot Camp after upgrade to Yosemite. I tried to recover by following the instructions on this forum but did not.

  Issues related to the:

  1. can I get it back? See some of the data below.

  2. otherwise, I can create a new training camp after the recovery of wasted space?

  3 is it better to first upgrade to El Capitan?

  Thank you in advance!

  ➜ ~ diskutil list

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 950,5 disk0s2

  3: disk0s3 Apple_Boot Recovery HD 784.2 MB

  4: Microsoft database 32.0 GB disk0s4

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS BrontoSSD * GB 950,1 disk1

  Logical volume on disk0s2

  90BC997C-0C7C-40FB-896D-973BC192A123

  Unencrypted

  ➜ ~ list cs diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 46320040-2E97-49D9-A652-87CBA72E637D

  =========================================================

  Name: BrontoSSD

  Status: online

  Dimensions: 950509715456 B (950,5 GB)

  Free space: 18956288 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 950509715456 B (950,5 GB)

  |

  + -> 14BD334A-53BE-4C89-949D-2E8E5EF30A59 family of Logical Volume

  ----------------------------------------------------------

  Encryption status: unlocked

  Encryption type: no

  The conversion status: NoConversion

  Direction of conversion: - none -.

  At encrypted extensions: No.

  Fully secure: No.

  Password required: No.

  |

  +--> Logical Volume 90BC997C-0C7C-40FB-896D-973BC192A123

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 950138437632 B (950,1 GB)

  Conversion progress: - none -.

  Reversible: Yes (no required decryption)

  Name: BrontoSSD

  Volume name: BrontoSSD

  Content indicator: Apple_HFS

  ➜ ~ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1953525167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1856464288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  1856873928 1531680 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1858405608 32621336

  1891026944 62496768 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1423 1953523712

  1953525135 32 table dry GPT

  1953525167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-1856464288]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1856873928-1531680]

  * 4:87 1023 254 63 - 1023 254 63 [1891026944-62496768] VS NTFS

  You must run Testdisk. Have what you tried so far?

• Dreamweaver CS3 crashes after the end of daylight saving time

  In Windows XP x 64, Dreamweaver CS3 crashes after the end of DST. There is a technical note which seems to describe the situation exactly. http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402776 & sliceId = 1
  
  However...
  
  (1) technical note says that this only happens with ASP and PHP code. I use ColdFusion. (This is a minor point).
  
  (2) technical note said...
  
  Remove the WinFileCache - AD76BB20.dat the Dreamweaver user configuration folder. Note that on Windows, the Application Data and AppData folders are hidden by default, so check that your Windows Explorer folder options are set to show hidden folders. The location of this file is as follows:
  
  Dreamweaver CS3 on Windows Vista:
  C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver 9\Configuration
  Dreamweaver CS3 on Windows XP:
  C:\Documents and Settings\ [username] \Application Data\Adobe\Dreamweaver 9\Configuration
  
  However, I couldn't find WinFileCache - AD76BB20.dat in Documents and Settings or in Program Files (86) \Adobe. (86, it is because it is a 32-bit program on a 64-bit computer, but everything else is the same). I tried then the two directories for *.dat and there was no file that resembled something like WinFileCache - AD76BB20.dat.
  
  . Can someone help me?
  
  Thank you!
  
  

  Alan, thanks for the suggestion.

  I did the research found the file, deleted it, open Dreamweaver CS3, chose the same text - and it crashed as before.

  THEN I REBOOTED and tried again - no. CRASH. So it seems that a reboot is an essential part of the correction.

  BTW: My situation exactly match the description of the Technote. (1) the accident occurred when selecting - in design view or code - some text in a HTML context involved in the code ColdFusion; (2) I had no problem with these files before DST ended; (3) even after I've not had any problems with them in Macromedia Dreamweaver 8 on another machine - the problem is that the CS3.

  So the TechNote is correct as it will, but should be changed as follows:

  (1) ColdFusion should be included in the types of code that can be associated with the problem.
  2) instead of delete the WinFileCache - AD76BB20.dat, you should delete the WinFileCache-[any] .dat.
  (3) a reboot after the removal may be required.

  Anyway, problem solved.

  Thank you!

• Illustrator CS3 crashes when changing places during save or place. Mac, Yosemite

  After the update to Yosemite and fixing the original problem of not being able to open Illustrator (older Java installation). Now Illustrator crashes whenever I try to select a location to save the file. If I save without changing the location of the file is not a problem. Also, it crashes when I want to PLACE a file and I try to navigate to the location.

  MacBook Pro (2012), OSX 10.10.2 (Yosemite).

  Adobe Illustrator CS3 (Yes, I know).

  Change fonts doesn't seem to be a problem. Large files are OK. It is only when you navigate to a location using a drop-down menu in the SAVE AS or PLACE dialog box.

  Any ideas of what might be wrong?

  New information: I changed the format of the adobe dialog box and it solved my problem. I'm leaving HERE in the case that everyone is facing it. However, I wouldn't mind know why it will not work the OS dialog box.

• Illustrator CS3 crashes when loading.

  Hello

  I use my edition of Adobe Creative Suite CS3 student for awhile now as well on an old mac and my new. Everything worked great until I upgraded to when you are prompted. The update seems to have a problem with Illustrator and after some time he jumped on the rest updates. Now when I try to open Illustrator it crashes right after that the option button 'open recent' and ' create new ' is displayed. I tried to run the software update to see if I could get the update to load correctly but it doesn't seem to be there.

  Is there a way can I fix?

  *************

  Update

  I downloaded a patch from the Adobe Support updated for illustrator and allowed me to open it. However, when I start the program, I lose my desktop settings and my experience goes blue. I know it's a minor problem, but is there a way of fixing?

  Have a look here:

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

  Mylenium

• iTunes crashes after upgrade to version 12.4.3

  Hello

  whenever I start itunes after the upgrade to version 12.4.3 the following occurs:

  The application starts, it checks the mediathek itunes, the iTunes window opens for 1 or 2 seconds, and then the application crashes.

  What can I do?

  Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

  Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

  If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  If it does not start, you will need to study along these lines:

  First of all, try to restart your computer.

  How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

  iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

  How to test a question in an another user account on your Mac - https://support.apple.com/en-us/HT204443 - "you can connect as a different user to see if unexpected behavior is related to the user's specific settings or files."

  LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369 - remove corrupted preference files

  Reinstall iTunes:

  -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

  -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611

  If iTunes does not start

• Display problems after upgrade to Yosemite iMac

  Since the upgrade to Yosemite my iMac has a very 'glitch '... screen Pixels flashing on the screen, all strange pixel following the mouse etc...

  When I boot in SafeMode the problem disappeared, so I guess that this excludes a graphics card problem. I had a reading and most other posts someone has suggested to run a script to determine the cause of the error. I did, but I know know how to decipher the output.

  Link to the old post office with the same question and suggested script etc: https://discussions.apple.com/message/30603036#30603036

  I ran the script Linc so kindly posted above and will display the results below:

  http://www.pastebin.com/embed_iframe/R5ATQcz1

  I was wondering if someone can see what the issue is and suggest how I can go back into service again.

  Any help would be great.

  Thank you very much

  Devs.

  Most people advise of not not to use cleaning programs. They can destroy the functioning of your computer as they may already have done.

  CleanMyMac2 uninstall

  After UN-installing use, this program to ensure that you have received all parts.

  EasyFind-replacement of Spotlight

  Uninstall Kapersky. His tendency to interfere with the operation of the computer while offering little or no benefit.

  Uninstall Kapersky

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• Crash after upgrading to Workstation 10.0.6 - 2700073

  Upgrade to 10.0.6 - 2700073 this morning, and workstation crashes as soon as I start it.

  The details are in the attached ZIP file:

  -capture of screen crash

  -captures of three log entries of applications to screen the accident events

  -vminst.txt, which has been updated at the time of the accident

  The .xml file that is mentioned in one of the entries in the event log does not exist on my system.

  I'm running on a host Windows 8.1 and have been running earlier versions of workstation for more than a year on this PC.

  PC is a Lenovo Thinkpad T503

  I'm going to uninstall this version and try to reinstall the previous version.

  Someone at - it ideas about the cause of these problems?

  Had the same problem of crash after the upgrade and after some research I found this post which gives a few details why the crash occurs.

  To solve the problem simply do the following:

  Find the file libcurl.dll in your VMware Workstation installation folder.

  (I found 3 cases on my machine windows 8.1)

  C:\Program Files (x 86) \VMware\VMware Workstation\x64

  C:\Program Files (x 86) | VMware\VMware workstation

  C:\Program Files (x 86) \VMware\VMware Workstation\OVFTool

  Make a copy of the files in the first 2 files with a modified date of 04/28/2015

  Replace with a copy of the file in the 3rd record (\OVFTool) before the date last updated on 02/04/2015

  Start VMware Workstation

  This fixed the issue and no uninstall or reinstall required, I tested and did not have any issue.

  I take no credit for this that the problem was discovered in the post below, which has more details on the exact cause.

  http://blog.rewolf.pl/blog/?p=1167

• Failed to open session in Windows 7 'could not load user profile.', in VMware Fusion 7.0 after upgrade to Yosemite

  I upgraded my Mac Pro in OS X Yosemite 10.10. Before the upgrade, I did a normal shutdown of Windows and VMware Fusion 7.0.0. I also checked first for updates from VMware and was up to date.  After completing the upgrade, I restarted VMware and subsequently started to Windows. Shortly after entering the password to logon to Windows, I received the following error message "the service user profile Service has no logon. The user profile cannot be loaded. "My only option is to click OK, then it seems to re-start Windows, but I'm stuck with this result every time. I restarted the Mac with no variation in the result. Before the upgrade to Yosemite, I have not had any problems. Any help is appreciated.  Thank you.

  I found my answer for someone who is interested.  This isn't a Yosemite or VMware problem.  That's all just a fault which occurred during logon more likely an anti-virus on Windows running in the background.  There is a fairly simple solution be found on the Microsoft support site, http://support.microsoft.com/kb/947215

  I am once again running without any problem.

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• iBooks Crash after upgrade to 9.3

  How is it without a body is equipped to answer the Question of iBooks crashing and delete all files after the upgrade to 9.3?

  As soon as I upgraded, I lost everything in iBooks. I had near 100 VIP files now they are gone.

  is there a stage of recovery that implimented can recover my files / content?

  Please HELP I can't afford to lose all my files in iBooks

  I have the same problem on my two iPads Air, Air2. IBooks after iOS 9.3 upgrade freezes constantly. Even if I managed to open it, crashes. My meticulously organized more than 4K books are now in chaos, all the sorting is lost. Half of them are without lids, have no idea how much is lost.

  I tried to reload and re-sync, nothing works. It's the same thing with my iPad 2 couple years ago when Apple has released one of their iOS update. As soon as I remember, iBooks was not working for more than a year. At least go and leave a feedback, doubt it will help, but worth a look.

• Firefox 4 beta too slow / crashing after upgrade memory?

  Hello

  my beta firefox started crashing my whole system yesterday and only noticeable change I did was upgrade memory of 3 to 4 GB of RAM...

  I tested my system widely and it works very well until firefox is started, after that, the system started crashing and takes forever to be reactive. I uninstalled and reinstalled firefox, tried running without addons, I tried to close all the tabs and all Eske I remembered... still no luck.

  I am desperate because I really wanted to keep this beta on my computer, and cuz is a new facility, I can not install firefox 3.6 on side by side, I only have an option 'upgrade' on the installation wizard...

  What can I do to fix this?

  Thanks in advance!

  The steps to troubleshoot and diagnose problems of Firefox would say you always try in questions to troubleshoot Firefox in Safe Mode of course some additional software may conflict, it is even more likely if you are using a beta version of firefox and probably the beta or alpha some of the addons or plugins.

• Pavilion dv6-4024tx: display random crashing after upgrade to Windows 10 (back to Windows 7)

  Hey all,.

  I used to own a computer laptop dv6-4024tx Pavilion which I gave to my father to use after you have bought a new laptop for my part. It was in pretty good condition when I gave it to him, with the only problem being that she would get very hot unless a cooling pad was used (which I it comes with). At the time, it was running Windows 7 Home Premium with no problems and everything was fine. However, it might be interesting to note that while I had it I had problems with random blue screens while I was with the latest graphics drivers, so I drove back to the drivers supplied on the support page for this laptop. After I "upgraded" to Windows 10 (do not perform a clean install) for my dad, the laptop would randomly crash and display something like the photo that I have attached, before going empty and show again several times. Believing that it would be a problem with the GPU, I went and Display Driver Uninstaller to remove completely all AMD drivers and software, downloaded the latest driver on the AMD website and installed. It seemed to temporarily solve the problem, but as it's always within 30 days of installation, I offered to go back to Windows 7, but my father wanted to leave it and see how it happened. Oddly enough, for the next month, it never reported the laptop crashing again and the time period for return finally expired. The problem of course back then I tried the same solution from before but the noise continued. I tried to disable the GPU completely from the Device Manager, so that the laptop was running with Microsoft Basic display adapter. He seems to have stopped the fracas, but less than a week my father told me that he had crashed again.  I tried to restore the laptop to a system image I had done years ago, but I learned that you cannot restore an image to a different version of Windows System. Finally, as a last resort I backed everything up and made a real clean install of Windows 10, and the problem has not yet disappear.

  My goal now is to return the Windows 7 laptop somehow. I can mount a virtual image of the system hard drive and access all the recovery files provided by HP, specifically the Recovery Manager. From there, I can do a recovery USB or DVD (s) we hope to restore the laptop to all conditions of factory (so theoretically return to Windows 7). I will try this, but I need a flash player more than 20 GB or several blank DVDs I don't currently. In addition, Recovery Manager says that this medium can never be created once, so it save me time and money (not to mention my last lifeline) if someone could please share their views on the question of whether this method would be successful or not. I know in case it doesn't work, there is always the question of registration of the OS by Microsoft, but I can cross that bridge when I get to it.

  Sorry for the essay I just wrote, but this has been a problem for too long, and I am at a loss to know what to do now (apart from the purchase of another computer). If there are any questions I'll be happy to answer, and I hope we can get this issue is resolved. See you soon.

  

  If you follow this step 3.

  http://www.SevenForums.com/tutorials/675-system-image-recovery.html

  You will need to select "format and repartition disks" as windows 10 will have changed partitions.