Image fails after about 1 week to install

Similar Questions

• T400s camera stopped working after about 2 weeks

  Got a new T400s, well worked out of the box.

  After about 2 weeks, do not use the camera (of course, I checked, it works when I install everything first) the camera no longer works.

  He appears in the Manager of devices, but Skype and other software just to see a black image. The LED on the side, which according to me, shines green when the unit is supposed to be consulted running is no longer.

  Installation of the driver and going back in time (recovery point) makes no difference.

  I really want to reformat the drive, there are a ton of my files on it...

  ideas?

  Ok

  I contacted local support and they wanted me to come and check the camera themselves.

  In preparation, I removed the extra 1 GB of memory (3 GB total) I had installed and tried again just before departing for their labs.

  Guess what, that fixed it for me!

  It seems that this model has serious problems with asymmetric memory facilities. I installed a 2 GB module and some of the other problems plaguing this unit had disappeared too (VT - D causing disruption of the screen and also occasional freezes).

• Firefox seems resets automatically at default old after about a week. Gmail is not the latest version and when I try to reinstall I get malward. What can I do to f

  I have trouble with Gmail because it does not load in the regular version and I have to use html...
  or the old clumsy screen. It was uninstalled and reinstalled many times problems malware, and it works very well for about a week, then returned to the problem area. I don't know what to do to solve this other than uninstalling and reinstalling. I ran my malware software and it didn't tell anything.
  I'd appreciate any help.

  Maybe your program isn't found, no malware scanner is perfect.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Problem NVIDIA - continues to change my resolution after about a week of use

  NVIDIA changes the settings to 1680 X 1050 to 800 X 600. Can I change it to 1680 X 1050. He will be there for about 1 week and then repeat that unwanted changes could YOU please RESPOND to MY NEW e-mail ADDRESS;  Thank you

  E-mail address is removed from the privacy *.

  Hello

  1 are you aware of recent hardware or software changes made to your computer before this problem?

  Click on start it > type device manager in the start search box > expand graphic cards. For the most recent driver, see your graphics card on the website of the manufacturer of the computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Download Driver link for NVIDIA:

  http://www.nvidia.com/download/index.aspx?lang=en-us

• The driver installation fails after custom Windows 7 Pro install

  Hi all.  I just replaced the drive hard on my ProBook s 4440 as the original, one crashed unexpectedly.  I then reinstalled Windows 7 Professional but now have no way to connect to the internet.  I installed the driver of "Sierra Wireless Driver Package for add-on unit high flow Mobile HP un2430", but I still see the message "no connection is available" when I try to connect to my wireless network.  By Device Manager, I'm still missing the drivers for the following (hardware IDS are in brackets):

  (PCI\VEN_197B & DEV_2392 & SUBSYS_17F3103C & REV_30) base system device

  (PCI\VEN_10EC & DEV_8168 & SUBSYS_17F3103C & REV_07) Ethernet controller

  (PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00) network controller

  Controller of communication Simple PCI (PCI VEN_8086 & DEV_1E3A & SUBSYS_17F3103C & REV_04)

  (PCI VEN_8086 & DEV_1E31 & SUBSYS_17F3103C & REV_04) USB controller

  Any help or advice would be greatly appreciated.  Thank you!

  Hello:

  You need the following drivers:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111787-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111305-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-116003-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-110949-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229486&prodNameId=5229488&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1

• My laptop not feed on I tried all the usual, still don't work then after 3 - 4 weeks it suddenly starts up

  Hi, a few months ago my laptop (Toshiba Satellite L350-235) suddenly turned off. I did all... now the key power key used remove the battery etc, still no joy. So I took it to a repair center who said it might be the motherboard. They said they changed the motherboard, so I got home and once again

  a few hours is the same so I'll back with her and finally, they said there was something that needed to replace the BIOS.
  I'm not technical interested so I do not know however it worked once more in the store but once again after about a week, you stop again then after about three weeks to a month it works once again, now its judgment once more. The laptop doesn't have enough for three years. Any help would be appreciated.

  Hi Junath,

  Because the problem is related to hardware, I suggest you contact Toshiba they would be better equipped to help you about this malfunction of the equipment. You can contact them at the following link:http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• The secondary SATA drives fail after two weeks

  Original title: 2nd disc hard failure.

  The tale here is that I use a secondary internal SATA HD for the media. We failed a two weeks after I put it, I put another new. Same thing, about a week later he began to fail. Now I will try to be as specific as possible;

  The readers in question are disks SATA GB 82. I have media files on them. For the first week or two, they play very well conducted. However after that files that have played very well before jump frames, freeze, Ghost or simply crash my computer. Almost as if something is to put a heavy load in data transfer. Although I do not have the hard drive.

  I can't say the HD's are lacking, because I tried 2 new on different ports SATA on the MB.  I check performance, CPU load monitor, the memory usuage is around 50%. I am religious do not have many programs running, even if my computer could handle. Also, I check performance monitor to see which discs were being accessed and very little that was going on with my high school, certainly not enough to explain why it is to be extremely slow.

  Hello

  I suggest you to check the drive for errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  It will be useful.

• Microsoft wireless intellimouse 3000A failed after 3 months, two within an hour and a third a week more later all computers portable differnent

  I bought 4 intellimouse to 4 laptops.  After the failure of 3 1/2 month three of appoximately transceivers, quite warm to the touch you can not hold them as if a diode were burned.  Two of the transceivers has no less one hour of each other and the other a week later.  The first sign was an on-screen error message (windows 7) that a usb driver failed after detecting a device.  Did I just get a bad batch of peripheral mouse (Best Buy in Auburn, ME)?  Only one of the original devices 4 still works.  We have replaced the three different failed with wireless mouse devices and they worked.

  Hello JohnMCronin,

  These mice come with a warranty. I suggest you contact the Microsoft warranty service to help you with this. You can consult the manual for more information on this warranty. Here is a link you can follow and which will give you information about this:

  http://www.Microsoft.com/hardware/warranties.mspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• I click on upgrade, it starts to install then after about 2 seconds. it come I can't install windows 10 error 80070003.

  Hi I'm moving to windows 10, once I click on upgrade, it starts to install then after about 2 seconds. it come can not install windows 10 error 80070003, someone has any ideas?

  ABATTS

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

  Try the upgrade again. If it does not work.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Installation problem after about 42% Photoshop CC 2015 - Installation failed

  Hello, I am a Subscriber just for Adobe Creative Cloud for students, and even if I wasn't expecting great fluidity using Photoshop with my Macbook Pro 13 "mid-2010. I hope that I could at least run the software. But no, I tried to download Photoshop CC 2015 and older versions with the creative cloud tool but after about 42%, it stops and displays the message "installation failed", without further explanation or error code. The strangest thing is that I installed Illustrator CC just before. Of course, I tried to uninstall CC and use the CreativeCloud cleaning tool , reset each time, but it does not improve. Sorry if my English is not very good, I was just planning more answers I should have in French.

  Well in that case I advise you to Contact customer services as technical troubleshooting may be required.

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• Satellite M100 recovery disk failing after loading ramdisk image

  Hello world

  I have a Satellite M100 (bought mid-2006), 512 MB RAM, 60 GB HDD, Intel CPU T2050.

  I decided to have a cleaning and use the restore disc to return the laptop to factory settings, and then reinstall only what I really wanted.
  I had this done yesterday, I had forgotten something, then he ran again about 4 hours later.
  The first time that the restore worked, now it reboots once the progress bar reaches full when he says "Loading RAMDISK Image".
  After the progress bar reaches full, the mouse pointer appears for a few seconds then restart the computer.

  Nothing has changed with the hardware or BIOS, and what is on the HD should not have any effect because I am booting from the DVD.
  Can someone please help? I am at a loss to explain what happened in this interval of 4 hours.

  Thank you

  Hello!

  I agree with Akuma.
  Sometimes I can read here on this problem and I know you should only remove the partition on the HARD disk. Therefore, you can also use a Windows XP CD from Microsoft or the FDISK utility.

  After you delete all the partition, you should be able to run the recovery disk.
  Check it!

  Good bye

• The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?

  I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.

  am driven crazy by this so any advice would be welcome...

  Hello

  My friend John Papa - MVP - is the expert on Windows Movie Maker.

  PapaJohn.org
  http://Papajohn.org/

  PapaJohn - online tutorials
  http://www.Papajohn.org/mm2-online-tutorials.html

  Windows Movie Maker Tutorials - see the menu on the left and others on the main screen.
  http://www.windowsmoviemakers.NET/tutorials/

  Windows Live Movie Maker Forums are good sources of information:

  Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
  http://windowslivehelp.com/

  Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
  http://windowslivehelp.com/product.aspx?ProductID=5

  ====================

  These might help:

  Getting started with Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Import video from a videotape

  Get a movie in Windows Movie Maker

  Make a movie quickly in Windows Movie Maker (AutoMovie)

  Publish a movie in Windows Movie Maker

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Pavilion Notebook 15-n203ex: 10 a Windows Activation failed after clean install

  To say things in a concise way, I bought a HP Pavilion Notebook with Windows 8.1 15-n203ex 64 bit pre installed.  On July 30, 2015, I upgraded my windows 8.1 to windows 10 which was provided as a free Microsoft Update and everything went fine except for a problem of display that has been fixed after installing the latest Nvidia drivers.

  Now, after about 30 days, I thought to do a clean install to my laptop with windows 10 and so downloaded ISO appropriate and my installation. After the installation of the new operating system, it is not Activated at all no matter what I do, I get an error to enter the CD key.

  Before you do a clean install of windows 10, using scripts from the internet, I received the Windows key from the registry that is unfortunately not be accepted by windows 10 now.

  Microsoft has informed if an upgrade is done Windows 8.1 for windows 10 there is no need to have a key during installation should be the key automatically from the Bios, correct me if I'm wrong.

  Please, help me to overcome this particular problem I am facing.

  Even after 20 days Activation took place so I decided to do a brief study of the issue and find me a solution.

  I solved the problem by downloading the 8.1 Windows 64 bit iso from Microsoft's Web site and installed. During installation, surprisingly the Installer did not ask the product key. Everything went very well and immediately after the update of the firt he invited upgrade me to Windows 10 I did happily.

  There are several applications available on the internet that provides you with the windows product key 8 or 8.1 from the Bios. Neosmart found to be the most simple and free to use without any malware.

  Now, my laptop is running 64-bit Windows 10 and fully active and up to date.

  Hope that this could be useful for someone like me.