Image in the document present in the document, but do not print?

Similar Questions

• printer prints from the internet but does not print the document files

  My photosmart Hp 6510 series prints from the internet, but do not print documents saved in my Toshiba computer files. He did print before files. What should I do? This message has been incorrectly marked as the solution

  Are you connected via USB or you print wirelessly?

  I've included a few scareen shots below the best way to go about printing a word document. The icon of the file clicked at the top left, click on print and follow the screenshots below.

  Make sure the printer name is identical to the one that you want to print to. older printers may appear in the window also so do of course have chosen the right one.

  

  

• print jobs in the queue from the computer to the top, but do not print

  1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

  chrismcgo wrote:

  I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

  I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

• OJ j6480 all in one. : printer connected to the network, but will not print.

  OfficeJet j6480 all-in-one Windows 8

  My printer configuration report show that the printer is connected to my home network. My Control Center shows that my HP printe (my only printer) is listed as the default printer. When I open it, it shows a document in the queue, and offline. When I click on 'offline' the document in queue is considered and when I click on "Printer" in this window, the drop-down list displays the default printer, but 'use printer offline' isn't not verified. Bottom line, it's that I can't print. Help much appreciated woutd.

  I found someone with a similar problem and a simple solution. I deleted my printer in the "devices" list and reinstalled

  It worked. I suspect that your suggestion about the IP was probably on the brand, it had not occurred to me.

  Thanks for the quick response.

• Printer gets the job, but does not print the entire Page

  When I try to print on my network from my laptop printer, the printer receives the job, but only print a tiny part of the page, leaving about 90% white.  He does it everywhere where I launched a print of.  Excel, Word, Web sites and pictures.  All documents, it's the same thing.  I'm guessing it's something simple, but since a few days I can't understand it.  All of the suggestions.

  Hi BobbyPhillips

   

  1 can get you a preview of the page you print completely?

  2. What is the brand and model of the printer?

   

  The problem might be related to the printer settings. I suggest to get an overview of the page and check if the printer settings have been correctly configured. You can also check cartridge and any hardware problem associated with the printer.

   

  I hope this helps.

• 6 player XPSP3 accommodation under Vista-32 - troubleshooting - printers it the host but do not print

  With 7 Player, I created a VM XPSP3 on Win7-64 guest and was able to connect and print correctly after installing the VM Tools.

  However, under a multitude of Vista-32 running the latest available Player 6, the resized copy of VM sees all printers host very well, but prints never. The documents appear in the comments queue, then disappear after a minute or two, as if they printed. The printer itself is not even wake up. This happens for any printer tested. The same printers print without problem from the host Vista OS itself.

  I noticed that in the configuration of the VM on the host, no 'Printer' entry in the list of devices, even if I remember well, seeing that the entry on the Win7 host when I was testing on it.

  This seems to be a Player 6 configuration problem or a problem with the tool of ThinPrint not correctly passing through the print job to the host - apparently he just think that it is.

  What is my best way to troubleshoot and resolve this? I'm pretty new to VMWare is currently pretty much a black box.

  I'll try to uninstall and reinstall the tools if possible and report back if that helps.

  Success!

  I followed my comment on the missing printer entry in the settings of the VM on the host. By adding one solves the problem. Nothing else was required.

• Adobe Acrobat 9 Pro: changes/changes appear on the screen but does not print

  I put a 'white box' with no outline on typed text, and then type new corrected text on the white box.  Sort of a virtual Whiteout.  Until today, it was fine.  Now when I'm going to print the page, see the new changes, but the original text is also printing the document look sloppy and unique of the cause.  What is going on?

  Looks like you are using the typewriter tool. This tool and many other markup tools are indeed annotations. Get them to print, you can select the DOCUMENT and MARKUP in the printer menu.

• I try to print from Windows Photo Gallery. Put the print job in the queue, but does not print.

  I try to print a photo directly from the Windows Vista Photo Gallery. The task appears in the print queue and says he is "sent to printer", but prints never. I can print from other programs. I tried to reinstall my printer driver but no problems. My printer is a Dell 946. Any ideas?

  Hi DElizabethB,

  1 when was the last time you were able to print using Windows Photo Gallery?
  2. did you of recent changes on the computer?

  Method 1

  It is possible that some third-party photo editing software installed on the computer is in conflict with the printing process.

  I suggest that you check if the Windows Photo Gallery is set as default program for opening images on the computer.

  1. open default programs by clicking the Start button, click default programs.
  2. click on set your default programs.
  3. in the framework of programs, click the Windows Photo Gallery, and then click set this program as default.
  4. click on OK.
  5. check if printing works.

  Method 2

  It is possible that some settings for the printer are incorrect, run the fix tool available in the link below and check if it works.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 3

  It is possible that some third-party programs installed on the computer are in conflict with the printing process.
  I suggest you perform the clean boot procedure and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 on PC Toshiba laptop installs the drivers, but will not print on printer J4680 via USB

  Install windows on a Toshiba laptop 8. Installed the drivers for a printer Deskjet J4680 0n LPT1 through a usb cable.  Install looks like it is complete and presented in the material, but not in Word 2010.  In settings displays error. Don't know where to look for error, no code.

  KCC

  Suggest that you only contact HP.  We do not support hardware and software from Microsoft.

• MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

  I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

  A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

• Printer says I have ink in the cartridges but will not print black

  I have an HP Photosmart Premium C309g-m.  I am frustrated because for now, it will not print anything black.  The color setting shows that I have sufficient ink in all cartridges, including the ordinary and photo black black.  Should I assume that I have a bad ink cartridge (even if it was printing without problem), or is a printer problem?  I ran to the print head clean definition, but it did not help.

  It could be the cartridges, but I doubt it.  What you can try, is not this video, I'm going to the link below and also Bob Headrick printhead soaking.  I hope that will fix him

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/how-to-troubleshoot-print-quality-problems-video/m-p/4029104#M48162

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• Office jet Pro 8500 has e - all - in -: printer put in place on the WIFI, but does not print

  We have recently moved and had a Xfinity router installed. We have set up the wireless printer and it shows a strong connection and the printed report said PASSES on all lines. But it will not print from my PC. I uninstalled and reinstalled the printer software. I also ulugged the router, the printer and the computer several times, but he still cannot communicate with the printer. I am able to print from my IPhone using the HP application. PC of my husband and his Android devices will be not print. It uses Windows 8 and my PC has Vista. All wireless already worked.

  We already did what you suggested and also followed all the set-top and tools diagnostics we could find. He always says the printer is on the network and any indicated it should work, but the counter could not communicate with the printer. Finally, we met someone who suggested reset us the printer itself to settings by default and then put in place again. This time, it worked.

• 8600 visible on the network, but does not print wireless

  I can see the 8600 on my airport network, but does not display the work sent wireless (no error msg, stay in the queue). To print correctly if the USB cable is connected. Also see a separate network of 8600, but do not have a WEP key for it and don't see how to create one, so it won't let me join this network. Don't see any info on this in your pages and support forums.

  It was a very good question. I looked at my list of printer and there are 2 8600 s that are listed.  I think we could be active when the printer is connected via the cable and one for when it is wireless. I went by default and had no trouble in a wireless printing sheet.  It is probably a mistake on my part of the user, but I don't remember adding a second printer in the menu printing. I'll play around with it and remove an if it is not necessary. Thanks for your help.

• Cannot print on hp6500 wireless printer, documents are in the queue but does not print

  have that wont print hp6500 wireless printer. I have 17 documents in the queue and it does nothing. I unplugged my net gear and started upward and still nothing

  Contact HP support.

• Question is - can anyone make a guess as to why a feature of Style appears in the layer panel and appears in the preview, but does not print?

  Rich

  It may be that the race is too small to be noticeable on large print media.

  • What is the weight of the race?
  • What is your PPI image?
  • What is your size of the image - height & width?
  • What is your print size?

  Nancy