Image processor freezes, ignore video files?

Similar Questions

• Windows Explorer hangs and crashes on (tried everything) video files

  So I've had this problem for awhile now and it does not seem to deteriorate. Every time I open a folder in Windows Explorer that contains video files (of any type), YOU start to have problems. The Green loading bar starts to take forever, or if that manages to load properly, then doing ANYTHING with these files will result in US gel and ends up crashing. No matter if it is just a right-click, trying to highlight, trying to move, try to remove or trying to open. They all get the same answer.

  Things I've tried and the results:

  -Set the folder options to never display thumbnails (bar is no longer a problem too bright green)

  -Set options folder for general documents

  -Tried to optimize files with videos to video

  -Switched back to General

  -Ran of virus/malware scans (clean)

  -Never allowed cache, the nooks and the crannies of unnecessary files

  -Uninstall unused programs on C:\ for free space

  -Defragged everything

  -Uninstalled and reinstalled each video player

  -Uninstalled and reinstalled all my codecs, as well some as superfluous jic

  -Have toggled between every possible program by default, VLC seems more reliable (see the note below VLC), Quicktime least WMP and DivX uneven at best

  -Ran msconfig and methodically unchecked/restarted and then double checked / restart all services and the start of the program (no change)

  -Ran SFC Scannow (no reported problem)

  -Booted safe mode (no difference, we HAVE still freezes on video files, don't say anything about the running server error)

  -Use a directory of third-party files (Q - dir) to access files, Q - dir froze after right click on videos

  -Use a video converter to convert videos between file types, now accessible but converted videos seems not to to material they are converted into - in addition, nonconverted original suddenly too much work very well, but ONLY those that are accessible by the converter

  -Used VLC to find and open the video files. Œuvres, but only one at a time, that is, if I try to open another video file after the first in the same window of VLC, VLC freezes. Need to close the program, and then reopen the program to open a new file without freezing. Recently opened files of VLC are accessible via Windows Explorer without freezing (note, the accessibility seems temporary, filed consulted with VLC a few days ago to return to the State unclickable).

  -Note on VLC: may seem to move and delete files using the VLC browser without problem, but ONLY before opening any file - after VLC must be closed and then reopened as previously reported

  And Yes, I turned it works several times.

  I feel that I've tried everything, and the problem seems to be growing. I feel like there must be a problem with the way that we, I don't know, compiling data on files or something, but I don't have enough background tech to get past this wave and completely unnecessary idea.

  Oddly enough, everything else on my computer is fine. Non-video-folder navigation is fine, no lag or freeze, programs starts quickly, internet connection is fine, browser videos play without problem and when I can get the video file plays on something they play very well - just good luck for their.

  Any suggestions would be greatly appreciated, I'm about to tear my hair out.

  Hello

  Thanks for the reply.

  As you said you are not facing this problem to boot, it means that you are facing this problem due to a third-party application.

  If you are referring to the steps in the link below under 8.1 and Windows 8 Windows in 3 steps , after you check the box against hide all Microsoft services. You will see a list of non-Microsoft services, you need to check the cause of these services.

  http://support.Microsoft.com/kb/929135/en-us

  Uncheck half the service and check the rest of the half.  If you face the question yet, then it menas that you are facing this issue due to services that were not invalid.

• I can't get Dr. Browns Image Processor Pro to work with Photoshop CC 2014 bridge

  We use the DR Browns wonderful Pro Processor Image script much, but cannot make it work with PS CC 2014 bridge. When I select files in Bridge CC, then go to tools > Dr. Browns Services 2.3.1 > Image Processor Pro it appears an error message that says ReferenceError: photoshop is undefined.

  The real script works fine if I run it from Photoshop CC 2014 - just not so I load it from bridge CC.

  I uninstalled it and re installed a few times, both manually and through the CC of the extensions Manager.

  I use a 64-bit Windows 7 computer.

  I guess that there are a few changes in the part of the script that loads Photoshop of the bridge, but not course. It worked fine in CC. Simply not CC 2014.

  I open the Dr Browns Services .jsx file but don't see anything obvious. This is the section on the Image Processor Pro part:

  //-----------------------------------------------------------------
    // This routine takes an array of files. If called by Photoshop,
    // it will invoke Dr. Brown's Process 1-2-3 with the files. If called by
    // any other app, it will send a BridgeTalk message to Photoshop
    // to invoke this routine with the same arguments.
    //-----------------------------------------------------------------
  drbrownserv.process123 = function (files) {
  // Bring Photoshop to the foreground.
    BridgeTalk.bringToFront ("photoshop");
  
    // Create a new BridgeTalk message for Photoshop to invoke
    // Image Processor with the selected files
    var btMessage = new BridgeTalk;
  btMessage.target = "photoshop";
    btMessage.body = "drbrownserv.process123 (" + files.toSource () + ");";
    btMessage.send ();
    } else {
  photoshop.runActionCommand ('611736f0-9c46-11e0-aa82-0800200c9a66', files);
        }
    }
    catch (error) {
    if (error.number != 8007) // Don't report user cancelled errors.
    drbrownserv.alert (error);
    }
    }
  

  Nevermind - Dr. Browns Services works very well with CC 2014. I just had a lot of trouble with the upgrade... After uninstalling any version of PS and bridge, reboot and reinstall just CC 2014 everything works as it should. I had trouble with the upgrade by 2014 CC on both computers I use - but re-installing fixed everything and was easier to do that I thought it would be.

• I've set up an image processor in Photoshop and is to ignore some jpg files - can I batch convert convert these files to make them compatible?

  I have a number of jpg files in a folder that I am running a custom action on.

  It works very well for some files, but it completely ignores the others. Even if some of the ignored files are JPG files, I think they could be another type of jpg file, and that's why Adobe is ignorant.

  Is it possible for me to batch convert all these files, be it through Photoshop or another program, in a PS compatible files so that the image processor will treat?

  Thank you!

  The preference file may be corrupted, try to reset as mentioned above.

  Except that the only thing comes to mind is he thinks the file is a duplicate one ignores. But that's just a guess.

• Hi, my video files of the ICC will not download to my Sony digital camera, can you help me? Download very good images.

  Hi, my video files of the ICC will not download to my Sony digital camera, can you help me?  Download very good images.

  It is perhaps strange, but the video files created by your
  Sony Cybershot DSC - TX7 would be in MTS format...
  (also referred to as AVCHD).

  You can download a video cllp example of the
  next page:

  Sony Cybershot DSC - TX7 samples
  http://www.steves-digicams.com/camera-reviews/Sony/DSC-TX7/sample-photos-85.html
  (the video is the last at the bottom of the page)

• How can I activate images on the DVD in video file so that I can edit and send to people?

  Hello.  I recently transferred footage tape VCR to a gathering on a DVD of family.  How can I activate images on the DVD in video file so that I can edit and send to people?

  Any help would be appreciated, as I was chasing my tail for about an hour and a half now.

  Thank you!

  When you insert the DVD in your DVD player... close
  all the windows that can open and then go to... Start /.
  Computer... right click the icon for the DVD player
  is in, and then select or open Explorer.

  The files you need from the DVD are the. VOB files.
  You will find them in the VIDEO_TS folder. Copy them
  in a folder on your hard drive. Or you can copy the
  full VIDEO_TS folder.

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication it to .wmv or .avi format. Then...
  Re - import new video film for editing purposes.
  (if you have Vista Home Premium or Ultimate, you)
  may be able to import the VOB files in Movie Maker
  as they are)

  (FWIW... you can probably play the files renamed
  in Windows Media Player to be sure that VOB
  file to edit)

  If you are unable to import the files they need to be converted
  another .wmv format would be a good choice.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Dell xps l502x freezes making buzzz sound during playback of the audio or video file

  I have a two year old dell laptop xps l502x, who recently started producing some strange audio buzzz at regular intervals during playback of audio or video file.le sound is very similar to the sound when games used to freeze with the same anonying buzzz sound which is a very well known with the XPS L502X.i used only to have problem that the sound during games used to hang , but recently it has begun to occur during playback of audio or video files too.

  RTZ87,

  I just had a quick glance and the solution is in the thread below. Uninstall 'Dell Support help' and 'Dell Support Assist Agent'. They have been automatically installed on your laptop in the last two days and seem to be causing the problem.

  

• Constant video file freezes

  Whenever I have play video files saved on my computer, that they constantly freeze during playback. Most of the files are .avi, but I have files of several types. I tried on several media players city WMP and VLC, and the results are always the same. The video freezes every 3-4 minutes throughout the entire file for 1-2 minutes at a time, which makes very bad video.

  This does not work with streaming videos. YouTube, Netflix and others of this type of video display of any length without problems. It seems that it is only the videos that I play that are saved on my hard drive.

  Also, don't know if related, but it tends to be freezes with other media as well. My old and sound recorder Spotify also constantly freezing. Not sure if this is related, but thought I would mention in case it might help.

  Thanks in advance!

  Hello

  1. Videos played much earlier?
  2. Did you make any changes before this problem?

  I suggest you try this method and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  Set Windows Media Player as default player and check the status of the issue.

  Change the programs that Windows uses by default.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 3:

  Install the latest codecs and check the status of the issue.
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• How to get video files to show the image instead of the icon?

  When I open a folder to view the video files, many extensions, such as .wmv and .mp4 will display an image of the file instead of the default file for this extension icon.  But other extensions of video files, such as .flv and .mov, does not display an image from the file, but only the default file icon. Is it possible that I can get these other extensions to display an image rather than the icon?

  Hello

  This is normal. There is no way taken in charge to activate thumbnails for .flv and .mov files.

• In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  I have the same problem with. Recording with my camera JVC Everio MOD files.

  The problem is that. MOD files. All thumbnails of film appears correctly.

  I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

  Can anyone help?

  

• Default behavior of opening of files PDF image processor

  I have about 2 200 PDF files that I need to flatten and then convert to TIFF. I am able to do this in Photoshop using Image Processor, but the problem is that I first have to crop the images to the media box. Image processor seems to crop the default zone. Is there a way to change this, or some other way to accomplish what I'm trying to do without Image Processor? There are enough images that open each of them individually is not really an option.

  Thanks in advance!

  You might try this script PDF processor :

  http://www.PS-Bridge-scripts.TalkTalk.NET/

• Image processor: "no source file cannot be opened by Photoshop."

  I also get a "There is no source file that could be opened by Photoshop" warning when trying to record JPEGs of the images open (open from a PDF file) using the image processor.

  Here's what I do:

  1. open multiple pages to a PDF in Photoshop

  2. run Image Processor with the parameters:

  -Use open images

  -Save on 'Select the location of the folder' (choose a valid location)

  -Save to JPEG

  3 enforce

  And it gives me the warning. How files can not be opened by Photoshop. They already are?

  In fact I think its because that your open documents have not been registered, they opened images in a PDF document, the documents have never been saved, there is no backup file.  Image processor seems only documents of process with backup files.  It is easy to test this. Open the images in the PDF of the backup of the images on your desktop using 'Save AS', then run that image as you processor deal with open documents. I think you'll find the image processor will work then.

• When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago and th

  When I have videos on my calendar, they do not play in the screen of the monitor. I hear the audio but can't see the image. To test if my new files are somehow the problem, I went back and used video files that I have used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but don't see any video. Have I changed it some setting that controls video playback in the monitor window?

  Randy Ruttger

  Thanks for the follow-up.

  Missing in this equation are the Premiere Elements version you were using and the operating system on which it is running. But...

  The Act is accomplished. But... Up to now, and after that you went ahead and moved to version 12, we now learn what Premiere Elements version you were using. We don't yet know the operating system involved.

  You said first Elements 10. First 10 Elements is affected by a problem serious display known if the computer uses an NVIDIA GeForce video/graphics card card. In this issue, the only cure is to roll back the version of the driver about may 2013. The description of the problem and how to make the rear roller are described in one of the messages at the top of this forum. What video/graphics card your computer use?

  On another front, Adobe will release a new version of Premiere Elements any day now. Not one, but Adobe knows the function defined for the new version. This type of information is announced at the time of the release of the new version.

  So the solution to the problem you presented in this thread could have been...

  1 roll back the version of the NVIDIA GeForce driver for all may 2013 if possible (Windows 8 or 8.1 64 bit, maybe not possible)

  2. move to a different version of Premiere Elements (which you did)

  I offer the foregoing for consideration so that you can review your decisions. We are pleased to learn that the first items 12/12.1 works for you.

  Please do not hesitate to ask questions and seek clarification, but do not forget that the answers are in the details.

  Best wishes

  RTA

• Can Media Encoder take a sequence of images in the watch folder and turn it into a video file?

  I use OSX and Media Encoder 6 (6 pm) and does not know how the spyware file take a .jpeg or .dpi sequence and turn it into a single video file.

  I tried to copy all photos in the folder of the watch, who made 60 video files individual (one for each image).

  I tried to make a subfolder in the watch folder and copy images in there... to which Media Encoder did nothing.

  What Miss me? Media Encoder will take image sequences and make out like an audio-less video for me?

  Thanks for any imput.

  Hi action_packed,

  This is the documentation: http://helpx.adobe.com/media-encoder/using/add-items-encoding-queue.html

  Still image sequences are not supported as a source through spyware records footage. If a set of still images is placed in the watched folder, each individual file will be added under a separate item in the queue rather than the entire sequence as a single piece of film.

  Make a feature request for it here: http://adobe.ly/feature_request

  Thank you

  Kevin
  

• How to create a video file from still images.

  Hi all

  I run a film lab and digitally, I scanner film 8mm one frame at a time in TIFF / BMP / JPEG... etc. I changed PC and CC in the last month and I am wontering how to make video files off even these sequences of images in any application in CC. I guess my best bet is ecoder Premiere Pro or media?

  On my mac I used to use Quick Time which was very simple and easy to do, but before you spend the money to get the full version of QT on my PC, I was wondering if there is anyway I can do it in CC?

  All the best

  Kevin

  First Pro, After Effects and Media Encoder will recognize sequences of images in a video file as possible as long as they are named in sequential order.  For example, if you have a set of image files named "Test video Footage-# .jpeg. where # is replaced with the number of each image, then first and other image which will treat as a film element.  When you import images, there is a checkbox in the dialog box import indicating the sequence of images.  If this is not available, then first is not recognize the structure of naming as being contiguous. Media Encoder and After Effects have similar dialog boxes.