Image recovery error factory HP Envy 15

Similar Questions

• computer laptop dv4 1430 cannot start window and recovery ERROR 1002

  Sorry my English not just

  I have a problem to start my laptop.

  OK, when I turn on the power it lunch START REPAIR > system recovery options > Next > Startup Repair is checking your system for ploblem >... long... when I select restart or shut down , but STILL go to > LUNCH new STARTUP REPAIR

  or when I choose the Recovery Manager >> System Recovery > factory image recovery > ERROR 1002 Please contact HP support...

  Now, I need to open the window and how to do it.

  Please take care of my issue and I hope you understand my question.

  Thank you very much

  Jak

  Hello

  This process will allow you to do a Vista repair disc. This isn't an installation disc, but will allow you to use the Vista Recovery Console that is available on commercial versions of Vista.

  Download the file from the link below.

  Vista 64-bit

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip, when installed, right-click on the zipped folder, select extract files and then click Ok.  You should now see another folder containing the ISO file.

  You will need software to burn the ISO to a CD.  If you don't have that guy on the software installed, download and install ImgBurn and use it to burn the ISO to a CD.

  Once you have created the Vista repair disk, follow the guide on the link below to see if it undertakes to repair your installation - you may need to run this several times.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html#

  Kind regards

  DP - K

• Reduced image recovery and differences in system recovery?

  I bought Envy of HP dv7 - 7252 portable sr and before use of would like to learn the process of possible recovery of HP Recovery manager.

  Support document http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...

  With Factory Reset of his clear - recovery necessary and disc HP Media HARD will be completely reformatted and created default partitions

  With recovery of Image minimized and Systemm recovery is not if clear what are the differences:

  1. is the only difference that reduced image recovery will not install the evaluation version?

  2. what to partition the preparation process?  for Systemwrittenm recovery which reformats the disk system and which on the reduced image recovery ? Does reformat?

  3. What is the difference between the two to start the image reduced recovery /Systemm recovery and HARD drive recovery HP Media?

  4. default Systemm recovery not delete the partitions created by the user, but reduced image recovery provide a command prompt: delete or not.    It is valid for both methods: the HARD drive and recovery media?

  5. what CAN I DELETE in some SORT MY PARTITIONS AND LOST MY DATA USER WHEN USING image reduced recovery /Systemm recovery?  I found on this forum the recovery media response he no prompt reduced image recovery and default partitions created by the user will be deleted

  Types of recovery

  Your computer can have three types of available system recovery, or he might have only two. Use the type of recovery in order to solve your problem without making further changes as necessary.

• The issue of reduced Image recovery?

  So I tried to do a reset of my HP envy m6 - but the option is not available in the HP Recovery Manager and the reduced image recovery seems pretty well exactly the same (I have no need of trial or games) - my problem is, however, with the recovery partition.

  Will be the recovery of the reduced image delete all partitions and reinstall partition recovery (and os) - because I'm fine with that.

  Or do I have to specify not to remove the recovery partition?
  Or not make a choice, and I can just save the recovery partition?

  Thanks for any help you can provide!

  Hello

  Please check:

  

• Recovery error

  I have an acer aspire 5750 and he had taken error while I tried to perform recovery management.now as I turn on my laptop it shows a message of windows installation and when I click ok to this message, it shows that the Setup program begins services.i tried to fix it by pressing f8, 0, but the repair option is not appear.please help me to fix it without using a cd.

  Hello

  To use the recovery to factory with an Acer, you press the LEFT Alt + F10 keys at startup.

  "With the help of the outside Windows Recovery Management"

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  Note: During the process, all data stored on your computer will be overwritten. This means that all of your files, such as e-mail and photos, will be deleted. Therefore, we recommend making a backup of all data before starting the recovery process...

  Use the following steps to start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click next to start the restore process. Restoration can last from 10 minutes up to an hour.
  7. Once the recovery is complete your computer will load Windows and start the installation of your software and drivers. Your computer may restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  If the steps above do not work, you will need to use recovery media to restore your system. If you don't have an Acer recovery media set, you can buy a game online.

  See you soon.

• "Minimize the Image Recovery" since the recovery discs?

  the "reduced Image Recovery" is possible from the recovery discs? Installation win7pro from the recovery disks from HP on an SSD completely wiped for Elitebook 8560p.

  Not really something to see. From what I remember - was among other things - I have started from the disks and reduced has been one of the options. He didn't choose because I was doing a Factory reset for all restored partitions and laptop computer at State embedded. (I had already deleted the recovery partition & partitioned the hard drive for dual boot with Windows 8)

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Failure of System Image recovery

  My dv7 3165dx notebook PC is no longer support Windows 7.  I spent six weeks researching the issue through forums and even contacted HP support by phone.  The first action I took was to back up my files using a SATA cable USB on another computer.  Then I did a system restore.  The restoration process would be to reformat the hard drive, but could never reinstall windows aterwards.  Other research suggests that order the recovery disc for my particular model would settle the matter, so I did.  After trying to boot from the recovery discs, I finally got some error codes that suggested the hard drive has been corrupted and will need to be replaced.  I had 2 it professionals to confirm this suggestion and then explained my story to someone at HP support on the phone and confirm again once I needed a new hard drive.  (corrupted HARD drive is 500 GB)

  Now I have a new herd of 650 GB drive and follow all the instructions supplied with the discs.  I turn on the laptop with the first recovery disc in.  BIOS is configured to boot from the CD/DVD.  System Image Recovery begins, asking if I want to reformat the drive and start the recovery.  The progress bar indicates the restoration of files on hard disk and makes 30% after about 40 minutes, and then a box will appear:

  "Failure of the copy of the file.  Of D:\PRELOAD\BASE19. WIM C:\RM\Image\BASE19. WIM.  Press OK to retry.

  pressing ENTER or ESC takes about 20 to 30 minutes more to get the same box again never exceed 30%.

  I have a new hard drive and HP recovery disc and still not usable laptop.  I have read also several similar topics on similar problems but you have not found a solution that works yet.  I appreciate a lot of help.

  Hello

  You are welcome.

  I've always liked to link to the site to developers for free software, but I agree that the download options are not immediately obvious.  However, as you use a Mac, there is no need for additional software - you can burn the Image file (ISO) of Windows disk as described in he following link.

  http://www.Macinstruct.com/node/390

  Kind regards

  DP - K

• HP Photosmart 2575 Image Zone Error HELP!

  Here is the HP Image Zone error messages that I get for YEARS!

  1. "an unhandled exception has occurred in a component in your application."

  2. "null reference exception:"object reference not set to an instance of an object " ".

  The exception text *.
  System.NullReferenceException: Object Reference not set to an instance of an object.
  at HP. CUE. Video.PlaybackControl.UpdateProgressBar)
  at HP. CUE. Video.PlaybackControl._ProgressTimer_Tick (Object sender, EventArgs e)
  to System.Windows.Forms.Timer.OnTick (ByVal e As EventArgs)
  at System.Windows.Forms.Timer.Callback (IntPtr hWnd, Int32 msg, IntPtr, IntPtr dwTime idEvent)

  He also mentions Microsoft .NET framework and JIT debugging.

  The software has been made unusable due to error messages.  The only way I can get the pop up window to disappear, must go to the Task Manager, then click on end process.

  If anyone knows how to solve this chronic problem, irritating, share!  I could not find any help on the site of HP, on the Microsoft Web site, or in the resolution of problems on my computer.

  Thanks for advance-WSSD

  Kat-

  Sorry, I got rid of my annoying HP 2575, because a friend gave me an HP printer almost new (w / a price tag on that $ 100!).  But I tell you, this error message arises FOR YEARS and I have to many friends and family try to fix it for me. For a long time, I did what you... used the 'end process' in the Manager.  Sorry to say but I do not remember how I'm finally rid of him!

  Should have taken the post down, so people like you would potentially get their hopes for a solution!

  Have you tried to get answers on the site Internet of Microsft (or HP by the way), directly from the tech guys here?  Some are certified, more willing to give a lot of help and do not charge a penny!

  Good luck to you!

  MssW

• How do I backup updates windows vista installed before recovery to factory setting?

  Is it possible to backup installed windows updates? I intend to do a reinstallation of the system on a DV2225nr to factory settings, but I don't want to lose all the Windows Update has been installed in it. The last time when I did a recovery to factory settings it already took several hours just by practice and even Windows updates took forever to update. Thanks in advance. any help or advice will be greatly appreciated.

  

  HP DV2225NR, Vista Home Premium (32-bit), AMD 62 X 2 TL-52, 2 GB RAM, NVIDIA GeForce Go 6150, 120HDD

  Hello FM300zx,

  You cannot back up your windows updates... you have to REINSTALL them from the Windows Update program on the computer... no other way around it... insofar as some need to be installed before others are still visible on the computer...

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Reduced to the minimum the image recovery option still available?

  I used to have a HP Mini netbook.  If I needed to format the hard drive, I would use the HP Recovery Manager program.  What made this really cool program, it's that there is an option called Image reduced to the minimum recovery.  It would be to format the hard drive, reinstall the operating system, some HP maintenance programs and the necessary drivers.  More important still, No. 'bloatware' has been reinstalled.  It was a really clean format of the hard drive.

  Computers laptops HP today still offer the option of reduced Image recovery, or has that been deleted?

  I don't have one of the last with Windows 8, but the loan of 7000 DV6t aged 9 months with Windows 7, I use minimized Image Recovery. I think it is a durable feature that HP makes a large number of owners such as.

• Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  Error when you run DISM/online/Cleanup-Image /RestoreHealth - error 0x800f0906

  DISM / Online/Cleanup-Image /RestoreHealth

  Management and maintenance of deployment images tool
  Version: 6.2.9200.16384

  Image Version: 6.2.9200.16384

  [==========================100.0%==========================]

  Error: 0x800f0906

  The source files could not be downloaded.
  Use the 'source' option to specify the location of the files that are required t
  o restore function. For more information on the specification of a source location, see
   http://go.microsoft.com/fwlink/?LinkId=243077.

  The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

  Ran according to this link repair instructions.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/dismexe-online-cleanup-image-restore-health-failed/668ef107-5f4c-4959-Ba93-76d052452315

  Network list Service will not start.

  ---------------------------------------------

  Verifying the service dependencies. The following error message

  Win32: A dynamic link library (DLL) initialization routine failed.

  -----------------------------------------------

  Windows Update is able to operate, and I am able to download all of the updates.

  -----------------------------------------------

  Here is my DISM.log file for troubleshooting.

  http://pastebin.com/Z2Fc8JL4

  Excerpt from CBS. Only JOURNAL entries [SR]

  http://pastebin.com/1jn2SWPV

  Complete CBS.log for 2013-06-22

  http://www.sendspace.com/file/hdq0yu

  You get the error 0x800f0906 because you have installed KB3022345. Uninstall it by going to programs and features in Control Panel and then click on the link "View installed updates".

  In the Find box top right, copy and paste (or type) KB3022345 and when it appears in the list, on the right, click on it and choose uninstall.

  See these two articles for more information on the subject: Microsoft confirms patch KB3022345 SFC/scannow breaks

  Windows patch KB 3022345 triggers apparent file system corruption

• ORA-01033 and ORA-01113: file 1 should support recovery errors

  I ORA-01033 and ORA-01113: file 1 needs media recovery errors, I tried using the Recovery Manager to without result I got after a long wait of cataloging files... is ORA-19870: ERROR READING BACKUP PIECE, ORA-19501: READ ERROR ON LINE, ORA-27070: ASYNC READ/WRITE failed, OSD-04016: ERROR QUEUING ASYNCHRONOUS IO YEAR ASKS... then... switch to the previous backup... then RMAN-00571. 00569; 03002; 06026; 9 06023: I've exhausted all the advice that I know... PLS HELP

  Start rman and connect to the database

  rman target /
  

  Once connected, run

  list backup;
  

  If you don't find listed backup, you can use the catalog command to manually add information rman backup in the rman repository
  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta008.htm

• How is - a reinstall CS6 after a recovery of factory default?

  How is - a reinstall CS6 after a recovery of factory default?

  If you encounter a problem by reinstalling, run the cleaner, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html