import svg problem

Similar Questions

• Import SVG fonts

  Difficulties to import SVG fonts

  Thanks for the reply Preran!  I did load the TT fonts in my folder of fonts.

• v.38 a pst import again problem. v.37 ok if can import then upgrade.

  Just for a guy 'heads-up '. Recently installed Thunderbird on mine and computers portable friend without any problem.
  Tried to get it also works on my desk for a few days and it repeatedly crashes when importing. Tried all sorts of tricks like putting the pst file on a USB and uninstall/reinstall Thunderbirds and Outlook.
  Finally found earlier problem reports down to specific versions of Thunderbird. Laptops have v.37, but the Office has v.38.
  A previous fix was to install v.24 and then upgrade. Just tried this and it worked a treat. v.24 imported all my outlook stuff and then everything just improved v.38.
  Either way, all 3 machines running Windows 7 and Outlook Express.
  Best regards
  Phil

  Thanks for the heads up.

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• Board graph export SVG problem

  Hello. I have problems to export to SVG work plan.

  I have a very large vector of the United Kingdom's Ordnance Survey map, but I'm only interested in the use of a small part of it for display on the web.

  I've hidden the area I wanted and created a plan of work. It looks fine in Illustrator CC, but when I export in SVG with the option 'Use work plans' it leaves black holes in the plan:

  

  I'm doing something wrong or is this a bug?

  figured it out. Choose attributes of internal presentation instead of CSS styling option. This solves the ISSE

• Importer of problems - can't get out of drive c.

  I have 5 Lightroom on a pc. The first time I imported the photos a

  thumbdrive, I shamefully not paid no attention to my Adobe education

  the books and hit just the import button. Now when I try to import LR

  on an external drive, my computer gives me choices but

  Import on the C drive. And the Add button is not active,

  He would not light up for me. What should I do to get the choice

  my external hard drive from the button to so I can get

  import to the hard drive on my computer?

  Thank you

  Al Marotta

  Thanks for the comments, Bob. I guess

  I solved the problem, but maybe I

  don't have, then please don't go away.

  Since I have a memory like a sieve,

  I remember not if I hit add or copy, but

  I was able to get a destination FOR

  It wasn't my C drive, but an external drive.

  I hit the button import to complete

  This process

• import/export problem

  Hi guys!

  I have problem with a full import of 11.2.0.3 database on RHEL 6.4 EE (64-bit). I did a full export of my source as this database

  expdp system/pass COMPRESSION = ALL full = y parallel = 2 = ORCL_EXPORT dumpfile = expfull.orcl.dmp expfull.orcl.log = logfile directory

  and I tried to fully import in an another RHEL 6.4 db 11.2.0.3 with this line:

  Impdp system/pass parfile import.par LOGFILE = orcl.log =

  by file contains:

  DIRECTORY = ORCL_EXPORT

  FULL = Y

  DUMPFILE = expfull. ORCL.dmp

  EXCLUDE = PATTERN: 'IN ('USER11') '.

  REMAP_DATAFILE =

  ' ' / db/db/orcl_vip/userdata.dbf':'/data/orcl_data/userdata.dbf', '

  "' / db/db/orcl_vip/app11.dbf':'/data/orcl_data/app11.dbf' '...

  But each import of time been switched to the previous use of import with a completely different game from the import settings? Why?

  Just to say that I have doubts with parallel parameter indicated in the export script. Because the dump file is probably corupted because it did not divide? (it should be something like dumpfile = expfull.orcl%u.dmp? )

  Post edited by: rootsman

  I found what is right! I copy script import schema to another path to server and I changed to full import. Although I have change the Oracle script looks like just the script name and the version previous run of him no matter what I have change in it.

  So note to myself, always change the name of import script!

• import custom problem

  Hello!
  Is there anyone experiencing this problem?

  I try to import a clothing custom, following all the instructions provided by Adobe (and Mixamo too)
  but I feel something strange.

  I did a screen capture as soon as I clicked on the fabric imported (to easily show you the stitch)

  

  and soon after a screenshot with textures "supposed to be responsible" and normal (which work fine in all types of 3d software im using)
  It is supposed to be all orange, with a black belt, but here is what I get

  

  What I am doing wrong?

  I am running OSX 10.10.3

  2.3 GHz Intel core i5

  8 GB ddr3 1333 mhz ram

  Intel hd 3000 512 mb graphics card

  Thank you!

  Looks like it's probably a problem with the input color mask.  Fuse using a "diffuse" or color does the same way as other software because we have the procedural texture inside the software.  Your color for fuse mask entry should be only basically a mask ID that indicates the fuse is which region elements.  Each region should be painted with one of the 8 combinations available color 'pure '.  Each color represents a region of customization of the fuse that you can then apply a material in the fuse in.  If you want to have any transparency you can also add that in the alpha channel of a color mask.  Here is an example of torn trousers.

  

• I have dark sticky black background or import .svg?

  When I copy and past or import of Illustrator .svg present automatically generates a black background when there is none. I want to remain transparent.

  What I am doing wrong and what can I do to avoid this?

  I've updated to Muse and .svg seems in good condition.

  Thanks for your help!

• svg problem

  I opened a file Museum last year with the latest version.
  No longer appears in SVG Muse, but they appear when exported?
  What I need to do more just re-import ?

  
  

  AND!

  If I want to Update, I get this error . (see screenshot)

  
  

  Hello

  Please check the components Panel, if svg can be seen here.

  In addition, how the svg was created, and how place you in the Muse?

  Concerning

  Sonam

• Panasonic P2 import - audio problem of multiple files

  Hello

  I have a problem with MXF Panasonic P2 in first CC 2014 files. We have an a video in 3 parts (3 files on the disk). When I import video ago only audio of the first file. The video is OK. The rest of the clip is without audio. When I import the same clip in the first CC (7.0), everything is OK.

  Hello again,

  I tried record new file to test in the camcorder this morning (1 clip = 5 files on the P2 card). After you ingest using prelude CC 2014 (3.0), its OK there.

  Could be a problem caused by the previous ingest using prelude CC (2.0) and editing using first CC 2014 (8.0)? Could not be here any incompatibility with Prelude CC (2.0) and first CC 2014 (8.0)

• 7.5.3 import pdf problem

  I've recently updated to 7.5.3 and inDesign now fails to import a PDF file created by MS Word v12.2.1 - I am sure that the problem is inDesign as now, it is unable to import a PDF file that have been unchanged since they were imported with success a few weeks ago by inDesign before applying the update. Has anyone else seen elsewhere and you have a solution? Thank you.

  Scott was referring to culture options available when you view the import options. The cause of this failure is that the options are set to an invalid culture for the file.

• Import SVG graphics half missing

  I try to import this NETTO logo in Illustrator CS 5.5.

  http://images.Wikia.com/logopedia/images/c/C5/Netto_logo.svg

  It makes very well with IE9 and Chrome, but when I open it in artificial intelligence or use Place... He makes just a yellow box, no path for the dog + lettering.

  How can I get this fully functional image working in artificial intelligence? Tried the PS too, no luck

  Everything you need is there, it just piled up wrongly. Check the yopur layers palette.

  Mylenium

• file management and import the problem?

  Lightroom 3.4.1

  I have imported 685 images directly from a folder (2010_Newfoundland) on an external hard drive, manipulated images and export a subset of the images.  I then, at a later date, added an additional 179 images in the directory on the hard drive. In the lightroom import screen, the previous images were grayed out and not checked while the newly added images were normal and checked everything that I had experienced before.

  When I imported the images into Lightroom, I ended up the following.

  In the left side panel in library mode I see 'Newfoundland 2010' file is supposed to contain only the second import of 179 images while 685 origninal images are assigned in the file 'Catalog '.  By clicking on each of these issues offers a grid view with images 1 685 with attributes 179 shown in the left panel.

  However when I added the "2010_Newfoundland" file in Windows Explorer, the files are still there, and when I added the "Catalog" file only the Lightroom sidecar files are there without any other signs of 685 pictures assigned by lightroom

  What happened?.  How can I get Lightroom to recognize 685 + 179 images that are actually in the folder "2010_Newfoundland" and how can I stop the program recognize 685 pictures in the file 'Catalog' that aren't there?

  Thanks in advance

  I've never seen this happen, but it should be easy to solve:

  • Make a backup of your catalog
  • Right click on the file "catalogs".
  • Choose "Update folder location"
  • Point to the folder '1010_Newfoundland' on your HARD drive that contains the images

  You should get a warning from the merger, that the 1010_Newfoundland file exists already in LR, confirm with OK. This should fix the problem.

  Beat

• Import .jpg problem

  I am running the latest version of LR3. I have a few jpg files from my wife on his cell phone. She sent them to our e-mail provider and they came as attachments. I saved and renamed using the date-time convention, I always use and assured they had the jpg extension. I then tried to import them using the import normally routine that I use when importing files already on my computer. When I said LR3 where to go away, he tried to return and bring insight, but all five of the photes are light gray. There was a triangle with an exclamation point in the upper right corner of each of them, then I hovered over one of them with my mouse cursor. The context window came and said "Lightroom has encountered a problem handling this file." or words to that effect. I think that manipulation could be other words. It was a real surprise since because I'm new to LR3 I had spent many hours in the last week, bringing on the pictures that are on my computer by using this procedure, and this is the first time I had a problem.

  Anyone seen this before?

  Jim

  Jim Hodder wrote:

  HAL,

  Here it is again. I suspect it's being stripped by the Adobe server. clvrmnky

  says to use a service like yousendit where you download the file, and they send you

  an e-mail message, after which you're going to get it back. I went on their website

  but they charge for their services.

  No, yousendit is free for individual users. The prices you see are Pro or Corporate services.

  For what you do here, on the basic service free is fine.