Impossible to activate the WIFI button to turn it on there is gray and unresponsive.
WiFi worked very well on my HP TC4000. Now, it illuminates, either by function or switch side key.
Device Manager says it works very well. It is activated. (I tried the turn off/on a couple of times, but made no difference).
The Windows Mobility Center confirms that the unit is off. The button to turn it on there is gray and is unresponsive.
OT: My WiFi won't turn on
Marine salvation,
I suggest you contact HP support to check if there is no hardware switch which disabled.
http://WWW8.HP.com/ca/en/contact-HP/contact.html
Tags: Windows
Similar Questions
-
Impossible to activate the dark mode in Firefox 39.0 with subject: config.
After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.
That's what I changed:
Browser.devedition.Theme.Enabled: true
devtools. Theme: black
lightweightThemes.selectedThemeID: [email protected]I use "Fox, but better" plugin and I have to disable it without success.
guigs2 said
Hi CiRiX,
I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...It is possible to reinstall the extension, or try these troubleshooting steps:
I managed to fix it by clicking Activate and then deactivate it on another theme.
Thanks for your help!
-
I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.
Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."
In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."
I tried everything suggested, and what I found online to try. I'm missing something or not doing something correctly?
Thanks for any help!
Hi @3star8,.
Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.
This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.
Please let me know the result and if there is anything else I can help you. Thank you.
-
What should do?
To activate the wifi you press F2 or FN + F2. You can also go to the mobility Center in Control Panel to turn on the wifi as well.
-
Hello
I use Oracle Database 11.2.0.4.
After reading the documentation on how to prevent unwanted table DDL statement.
I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.
Turn it off doesn't work, however I can not re - activate.
The error message is:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
I want to activate the lock, because I need to add new columns to this table.
I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.
Impossible to activate the table lock after disablng it
ALTER table enable table lock blocking
However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)
'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »
By the way:
1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).
2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.
It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?
The table itself is located on the stops and never schema of production on which transactions take place continuously.
Is it true that Oracle expects all execute transactions? Is it known bug?
Why would Oracle wait as all transactions which has nothing to do with the underlying table?
Is there no workaround solution to solve this?
Note:
I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.
Kind regards
Buntoro
Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,
--
John Watson
Oracle Certified Master s/n
-
How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product
Hi Kenneth Ofosu Barko,
Please disable any firewall or Antivirus for now and try to activate Acrobat again.
Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?
Kind regards
Rahul Tyagi
-
recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off
Run this test and post the results here.
-
original title: sleep/hibernation
When my computer goes into sleep mode, I have to press the power button to turn it back on. I used only having to press a key on the keyboard.
Can someone tell me how to solve this problem, as if it was before?
Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel. Then go back and put them in the way they were and OK your way out. Occasionally, it will reset the internal parameters and things can return to normal.
HTH,
JW -
Computer froze cannot open any programs or even to use the Start button to turn off.
Original title: the computer froze.
Original title: my computer (Windows XP) has frozen. -Big problem -)
Hello
Last night, I used my computer to open a load of bunch of programs of MS Access (probably asked to run a marathon when he can only walk!)
Now, I can't open any programs or even to use the Start button to turn off. How can I fix this problem or you have lost everything :-(
Thank you
Thanks - all of a sudden he started working again! Maybe this was a vacation - but I tried F8 and safe option is not come to the top.
Very old computer - but it is useful to use to return to historical documents that I don't want on my new computer.
Tnanks for the long and dedicated response :-)
-
Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910
Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7
Hey daltsdad,
It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:
-
Impossible to activate the laptop on Windows 7 computer wireless network connection
I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!
* original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*
Hi djmoore20,
See the following article with information and troubleshooting on your question:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Impossible to activate the update lightroom5 to lightroom6
Hello
There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.
And when I ask to generate I have the not not request.
So how do?
Thanks for your reply.
We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:
-
How do I activate the Distribution button in the Transaction of material
Hi all
I created my new responsibility in Oracle EBS R12, in which no. function attached to the menu (SCM) when I check the Transaction material screen Distribution button is off here, but when I use only priority responsibility it's activate guide please how can I activate the dispensing button or by selecting a profile for my responsibility or others.
Thank youHello
-See - dispensing button on find significant operations in Wip will lights up not (Doc ID 565501.1)
-
Hello
I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))
Could you please help me, where is the problem?
I bought licenses for the view with the composer.
My environment are:
2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)
4 x 4 ESX u2 (2xESX by vCenter server)
2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers
Thank you
You have KMS license in effect for your Windows 7 Machines. If this isn't the case, that is the question.
You have 4 options:
Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.
Option 2: Use SYSPREP instead of QuickPrep
Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.
Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:
HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.
Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.
The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete. But it seems to work. I found no key but went ahead and created. Seems to work.
Larry
-
Impossible to activate the backup
I can't activate the backup to iCloud. I even built my iPad and still does not work. How can I fix it?
iCloud backup seems to be on the fritz - iOS 9.2 iCloud backup still not fixed!
Maybe you are looking for
-
Apple Configurator - ios 10 - applications are allowed with a composition problem
Hello We use apple configurator to generate configuration profiles imported into MDM and install remotely to iphones. Suddenly, we have a strange problem with configuration and 10 of IOS. In the configuration, we use "Allow only certain applications"
-
How can I disable a Firefox Add-on called ghostery
I can't understand how to disable addons
-
Try to install the software on target RT PXI 1082
Hello I try to run a chassis PXI-1082 (recovered with factory settings), but I have some problems when I try to install softawre through NOR-MAX on it from another PC connected with the ethernet cable. First of all, I saw a PXI chassis BIOS problem w
-
Impossible to debug with 9000 device
Hi, I develop a little app that I debug in the Simulator and now I wan't to test on a real device. I have connected my BB Bold 9000 to the Pc via the USB cable and selected "join" in the JDE. Currently, I get lots of messages like "cannot find NET_RI
-
Microsoft Photo Story 3-How do to customize motion and picture formats
Problems with photo story 3 I love this program and just got a new computer with windows 7. He did install the program BUT it is EXTREMELY difficult to customize the movement and the photos do not want me to drag them to new heights. This is one of