Impossible to get computers to communicate between WRT54G2

I'm trying to change my router from a WRT54GS to a WRT54G2.  I have three computers connected to the router, and they all connect OK to the internet (1 Wired, wireless 2).  But I can't seem to communicate with each other.  When I try to access the public space on all the computers to another computer, the computer cannot be found.  As far as I know, I implemented the same as the WRT54GS WRT54G2.  When I change to the WRT54GS, computers communicate well.  I tried to save the configuration of the WRT54GS and reading in the WRT54G2, but it does not work; of course, the formats are different.

I have a few internet cameras connected wireless, active port forwarding and the active TZO DDNS.  I can communicate with the camera in accordance with both routers the computers both local and Internet.  Of DHCP IP Active on both routers tables approximately the same IP addresses for the computers.  I have Norton Internet security on all computers, and it is configured to allow access to the local computers.

I can't ping all computers from another computer.

The only difference I see in the settings for both routers is the default gateway, but I don't see how this could affect telematics inter.

Setting WRT54G2 would touch this inter-ordinateur communication?

Thanks for your help.

Thanks to everyone for their responses.  After playing with the parameters more, it's Norton Internet Security, that was the problem.  I thought that there is a more different setting between two routers: the name of "router" in the Basic Setup menu.  "I had never changed a name by default, if the routers are called 'WRT54GS' and WRT54G2.  I changed the name of the WRT54G2 WRT54GS router and was able to communicate from one computer to another, but not vice versa.  Both computers have different versions of Norton Internet Security (2008 and 2009).  So I figured out how to add computers to the zone of confidence.  A version done automatically (don't remember what version), but I had to do it manually for the other version.  I don't know yet why he worked with the WRT54GS router, but everything works fine now.

freebelle: as you suggest, I have disabled the firewall and that he was able to communicate.

richard804: you have been correct - it was areas of trust.

Wilco: I tried your suggestion (i.e. wired all the computers to the router).

Thanks again for all the help

Tags: Linksys Routers

Similar Questions

  • Communicate between extension html and c ++ plugin

    Hi all

    I'm developing an extension html for InDesign CC2014. There is a scenario where I need to communicate between the extension and the C++ InDesign plugin.

    I followed the instructions at http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/cs-extension-builder/pdfs/CC_Extens ion_SDK.pdf and wrote on the extension of the code part. The part c ++ code has not changed since the Flex versions, so no problems there.

    I tried to call the extension of the plugin and it worked. I recorded an event in the plugin to listen to and sent another event of the plugin. But the Committee does not seem to listen to or distribute any type of event. On the part c ++ plugin, the error of registration codes and send returned were codes of success, so the problem is not with the plugin.

    Here's the code for the html Panel,

    I save the event to listen to at the time of the loading of the page.

    function onLoaded() {
    var csInterface = new CSInterface();

 // Register the named event handler
  csInterface.addEventListener("com.mypluginevent.test", myEventHandler); 

}
//Create a named event handler callback function
function myEventHandler(event)
{
  alert("Event captured!");
}

// This function is called on a button click
function onClick()
{
  // Create your local CSInterface instance
  var csInterface = new CSInterface();
  var event = new CSEvent("com.myhtmlevent.test", "APPLICATION"); 

  event.data = "This is a test!";
  csInterface.dispatchEvent(event);
}

    Here's the part C++ code where I send the event "com.mypluginevent.test".

    csxs::event::Event event = {"com.mypluginevent.test",
                              csxs::event::kEventScopeApplication,
                              "myEventHandler",
                              NULL,
                              NULL};

csxs::event::EventErrorCode err = sdkPlugPlugInstance.DispatchEvent(&event);

    I always get a hit on the dispatch of the event, but the extension intercepts her.

    Can someone tell what I am doing wrong?

    Hello

    I don't know if it will help but take a look at the documentation for CC 2014 (rather than the CC 2013 docs you use): official Adobe Extension SDK Documentation for 2014 CChttp://adobe.ly/1rin38t>

    Best regards

    Hallgrimur

    --

    René Hallgrímur | Product Manager Adobe EAC | @HallgrimurTh

  • Impossible to get Min, Max and median of the values in the date range values

    Hello

    I had a requirement as to show the data of each charge group of wise men as '< 100' ' 100-199 "" 200-299 "" 300-399 "400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 '"»

    With the query be able to get the count between the beach and the total below. But impossible to get the Min and Max values for this range. For example if the County < 100 is 3 then in these 3, the lowest value is need to display in the min. Idem for Max column also.

    In the light of the median value on these values.

    Thanks in advance.



    Requirement is as below:
    State < 100 100-199, 200-299 300-399 400-499, 500-599 600-699 700-799 800-899 900-999 > = 1000 Min Total median Max
    AK 1 2 0 4 1 4 4 35 35 4 1 $25 $85 850 $1,200
    AL 0 0 2 27 10 17 35 2 2 35 0 $103 100-$1 500 750


    * "QUERY ' * '"

    WITH t AS
    (SELECT 'AL' State, 12 DUAL FROM VALUE
    UNION ALL
    SELECT 'AL' State, 67 FROM DUAL VALUE
    UNION ALL
    SELECT 'AL' State, 23 FROM DUAL VALUE
    UNION ALL
    SELECT 'AL' State, 12 DUAL FROM VALUE
    UNION ALL
    SELECT 'AL' State, 12 DUAL FROM VALUE
    UNION ALL
    SELECT 'AL' State, 78 FROM DUAL VALUE
    UNION ALL
    SELECT 'AL' State, 34 FROM DUAL VALUE
    UNION ALL
    SELECT 'AL' State, 4 DUAL FROM VALUE
    UNION ALL
    SELECT 'AL' State, 12 DUAL FROM VALUE
    UNION ALL
    SELECT 'AL' State, 15 VALUE FROM DUAL
    UNION ALL
    SELECT "AZ" State, FROM DUAL VALUE 6
    UNION ALL
    SELECT "AZ" State, 123 FROM DUAL VALUE
    UNION ALL
    SELECT "AZ" State, 123 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 23 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 120 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 456 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 11 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 24 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 34 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 87 DUAL FROM VALUE
    UNION ALL
    SELECT 'MY' State, 23 FROM DUAL VALUE
    UNION ALL
    SELECT 'MY' State, 234 DUAL FROM VALUE
    UNION ALL
    SELECT 'MY' State, 789 FROM DUAL VALUE
    UNION ALL
    SELECT "HD" State, VALUE FROM DUAL 54321).
    -End of test data
    AS T1
    (SELECT State,
    NVL (COUNT (DECODE (VALUE, 0, 0)), 0) '< 100 ',.
    NVL (COUNT (DECODE (VALUE, 1, 1)), 0) '100-199.
    NVL (COUNT (DECODE (VALUE, 2, 2)), 0) '200-299.
    NVL (COUNT (DECODE (VALUE, 3, 3)), 0) '300-399.
    NVL (COUNT (DECODE (VALUE, 4, 4)), 0) '400-499.
    NVL (COUNT (DECODE (VALUE, 5, 5)), 0) '500-599,'
    NVL (COUNT (DECODE (VALUE, 6, 6)), 0) '600-699.
    NVL (COUNT (DECODE (VALUE, 7, 7)), 0) '700-799.
    NVL (COUNT (DECODE (VALUE, 8, 8)), 0) '800-899.
    NVL (COUNT (DECODE (VALUE, 9, 9)), 0) '900-999. "
    NVL (COUNT (DECODE (VALUE, 10, 10)), 0) ' > = 1000.
    (SELECT STATE,
    CASE
    WHAT VALUE < 100 THEN 0
    WHAT A VALUE BETWEEN 100 AND 199 THEN 1
    WHAT VALUE BETWEEN 200 AND 299, THEN 2
    WHAT VALUE BETWEEN 300 AND 399 THEN 3
    WHAT VALUE BETWEEN 400 AND 499 THEN 4
    WHAT VALUE BETWEEN 500 AND 599 5 THEN
    WHAT VALUE BETWEEN 600 AND 699 6 THEN
    WHAT VALUE BETWEEN 700 AND 799 THEN 7
    WHAT VALUE BETWEEN 800 AND 899 8 THEN
    WHAT VALUE FROM 900 TO 999 9 THEN
    WHAT VALUE > = 10 THEN 1000
    END
    VALUE
    T)
    GROUP BY State)
    SELECTION STATE,
    "< 100."
    "100-199.
    "200 299",
    "300-399.
    "400-499.
    '500-599,'
    "600-699.
    "700-799.
    "800-899.
    "900-999."
    "> = 1000."
    '< 100 '.
    + "100-199.
    + "200-299.
    + '300-399.
    + '400-499.
    + "500-599.
    + '600-699.
    + "700-799.
    + "800-899.
    + '900-999 ".
    + ' > = 1000.
    in total,.
    less ("< 100",)
    "100-199.
    "200 299",
    "300-399.
    "400-499.
    '500-599,'
    "600-699.
    "700-799.
    "800-899.
    "900-999."
    ("> = 1000 ') min_val,.
    largest ("< 100",)
    "100-199.
    "200 299",
    "300-399.
    "400-499.
    '500-599,'
    "600-699.
    "700-799.
    "800-899.
    "900-999."
    ("> = 1000 ') max_val
    FROM t1
    /

    Why not keep it simple?

    WITH t AS
(SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 67 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 78 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 4 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 12 VALUE FROM DUAL
UNION ALL
SELECT 'AL' state, 15 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 6 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'AZ' state, 123 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 120 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 456 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 11 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 24 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 34 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 87 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 23 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 234 VALUE FROM DUAL
UNION ALL
SELECT 'MA' state, 789 VALUE FROM DUAL
UNION ALL
SELECT 'MH' state, 54321 VALUE FROM DUAL)
SELECT state
     , NVL( COUNT( case when VALUE < 100 then 0 end ), 0 ) "<100"
     , NVL( COUNT( case when VALUE between 100 and 199 then 0 end ), 0 ) "100-199"
     , NVL( COUNT( case when VALUE between 200 and 299 then 0 end ), 0 ) "200-299"
     , NVL( COUNT( case when VALUE between 300 and 399 then 0 end ), 0 ) "300-399"
     , NVL( COUNT( case when VALUE between 400 and 499 then 0 end ), 0 ) "400-499"
     , NVL( COUNT( case when VALUE between 500 and 599 then 0 end ), 0 ) "500-599"
     , NVL( COUNT( case when VALUE between 600 and 699 then 0 end ), 0 ) "600-699"
     , NVL( COUNT( case when VALUE between 700 and 799 then 0 end ), 0 ) "700-799"
     , NVL( COUNT( case when VALUE between 800 and 899 then 0 end ), 0 ) "800-899"
     , NVL( COUNT( case when VALUE between 900 and 999 then 0 end ), 0 ) "900-999"
     , NVL( COUNT( case when VALUE >= 1000 then 0 end ), 0 ) ">=100"
     , count( value ) "total"
     , min( VALUE ) "min"
     , max( VALUE ) "max"
     , avg( VALUE ) "avg"
     , median( value ) "median"
from t
group by state

  • Satellite U500-176: Impossible to get an HDMI output to work on television or monitor

    Hello

    I have a new Satellite U500-176 but impossible to get the HDMI to work on a TV or monitor.

    Usually, when the monitor is connected and I press Fn + F5 I get only the 1 option (LCD).
    Occasionally, the HDMI options work but when I select one it goes to the screen and runs successfully for a few seconds then automatically returns.

    Any ideas?

    See you soon,.
    Roy.

    Hello

    Hmm, what operating system are you using?
    Was - this operating system preinstalled by Toshiba?

    Please take a look in the BIOS. There should be HDMI settings. Please check if it is enabled.
    In addition, I would recommend checking the graphics card driver update.

    What version of BIOS you are using the most recent?

  • I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

    Hi all

    I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

    I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

    I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

    Are there other sources, that I need to check? This is getting frustrating.

    Thank you much for the help.

    Sincerely,

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Impossible to get Vista SP2 installed

    Impossible to get SP2 to install on my windows vista 32 bit

    Download the SP2 installation file in a folder on your hard drive, then double-click it to start the installation.

    Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en

    Service Pack 2 for Windows Server 2008 and Windows Vista
    http://TechNet.Microsoft.com/en-us/Windows/dd262148

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • After you have installed Windows 10 (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

    After the Windows 10 update (don't like it) and go back to Windows 7 Home premium, impossible to get the Windows Update to run.

    Sorry, but KB3153199 has replaced two times at the same time. It takes the new version of the Windows Update client to correct known issues.

    http://support.Microsoft.com/kb/3161608

    Manual installation requires a continuous search to be interrupted. The value of the automatic updates to "never check updates" and then restart Windows.

    Best regards, VZ

  • Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

    Impossible to get brother printer to run on windows 8 model is MFC 685 - CW... also can't download itunes... Help, please!

    Hi Dominic,

    I understand that you are unable to respond to this thread and created a new thread.

    As restart the print spooler does not solve the problem, please reinstall the printer and then check if that helps.

    Check out the following link to resolve the problem of iTunes.

    http://support.Apple.com/kb/HT3204

    Hope that the information provided is useful.

  • How can I communicate between MUSE and animate CC OEM element?

    Hi all

    Please let me know how can I call the Muse javascript function (written using the object > option Insert HTML code) by a click of a button.

    This button has been designed and coded using CC animate and its OEM file has been imported in MUSE.

    Basically, I'm looking for a solution communicate between MUSE and OEM, and vice versa.

    Help, please!

    Thank you

    AshishK

    There is no adequate way to do file OAM control over site of muse. In fact, even a simple button OAM is a html document independent, which has a head, body and its own scripts and html code. OAM - is a site within your site are located in an iframe. This format is used for banners and animations for beauty, but not for the features. If you need the functionality, you must export your animation in html and javascript, disassemble the part code and integrate the muse - something on your mind, in the body. And of course, you have to understand with in the code. But even for a experienced, coders this approach would be absurd. It is easier to make a simple button in cssto integrate this a whopper for the site, which would create a disproportionate burden

  • With the help of LR4 with Windows 8 - impossible to get the images to desempilement.

    Using LR4 with Windows 8 - impossible to get the images to desempilement.

    Right click on the picture, select stacking, select Unstack

  • Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

    Newly build Production environment (don't use it yet)

    OS: Linux redhat 64-bit 2.6.18

    Cluster version: 11.2.0.4

    This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

    Alerts cluster log shows below:

    2014-03-25 03:50:01.429:

    [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

    2014-03-25 03:50:01.433:

    [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

    ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

    2014-03-25 03:50:02.123:

    [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

    2014-03-25 03:50:03.407:

    [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

    2014-03-25 03:50:03.411:

    [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

    The NEWSPAPER of the ASM alerts:

    Wed Mar 25 03:21:49 2014

    WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

    WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

    WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

    WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

    Wed Mar 25 03:21:49 2014

    NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

    NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

    NOTE: check PST: grp = 1

    GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

    ERROR: read no quorum within Group: required 2 found 1 records

    NOTE: audit PST grp 1 fact.

    NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

    NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

    GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

    ERROR: read no quorum within Group: required 2 found 1 records

    Wed Mar 25 03:21:49 2014

    NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

    WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

    2 node rac cluster is normal.  We were able to stop the crs without force.

    What should I look at to understand what is happening here?

    Thanks to adavnace.

    WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

    NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

    No default value is 1 M

  • Impossible to get anything Ive photoshopped with 14 elements Adobe to shoot and print at Wal-Mart kiosk

    Impossible to get anything I photo shopped with Adobe Elements at a Wal-Mart / Walgreens. Never had a problem with the photos, saving and printing with Corel Photshop

    File > save under of the editor and use the drop-down list to change the file type.

  • Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

    Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

    Hi woodysk

    Greetings.

    • You will need to read and write permissions on the Adobe folders manually.

    Please follow the steps below:

    • Right-click on the icon in the Finder and select the 'Go - To' folder option.
    • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
      • ~/Library
    • Then go to the Application Support > Adobe.
    • Right-click on the Adobe folder, then select the GetInfo.
    • Expand the section sharing & permissions.
    • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
    • Please click on '+' symbol, it will open the list of user accounts.
    • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
    • Click the gear icon and select apply to closed. Close the dialog box for information.
    • Then launch Lightroom application and check.

    Let me know if still face you any issue.

    Concerning

    Rohit

  • My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and

    My Mac crashed and I had to reinstall everything. Photoshop keeps giving me the following error message, even after multiple uninstalls and reinstalls: error 16. It is impossible to get support from adobe - no one to call. It's for Photoshop 13.0.6 and Mac Os 10.10.5 help please. Please respond by email to [email protected]

    I got this error 16 experience on my Macbook. The permissions for the Application Support folder have been changed.

    A simple fix Terminal can take care of that.

    Open Terminal (you can just tap Terminal in Spotlight to find it).

    Copy and paste this command in Terminal: sudo chmod-r 777 library/Application\ Support / Adobe

    Press enter, give your password if requested, and then try again. You may need to restart your Mac.

    Gene

  • Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

    Nevermind, I finally got it to work, thanks!

Maybe you are looking for

  • disable the resizing of Textarea in firefox - not the website owner

    How can I stop Firefox resize Textarea? I'm not the owner of the site and deal with a lot of sites with these form so to modify the HTML code is not an option. Is there a setting in everything: config or add-on to disable this for some/all Web sites?

  • Buy a custom configuration of Satellite P300 online?

    Hello world I have a question. I bought the laptop Toshiba Satellite P100-260 3 years ago. Recently, it was covered with water and it costs a lot to fix.I also had a windows XP media center on it. The question is: can I buy a custom Satellite without

  • applenews

    Since the app store on my iPad, I look for "Apple news App" in the section "exploring." The first application that appears has an image that says "News" with an explanation: "News offers the best stories from your favorite sources, elected for you. (

  • HP 309 paper jam message

    1. There is no paper that is stuck inside. 2A looked everywhere, took off the duplexer. Removed all paper. 3. the power recycled several times. 4. do you have a #3 then #6 then #9 (two times nothing). 5. rocked and shook, nothing. 6. use compressed a

  • Why does become worse every version of Windows?

    I am amazed how Microsoft continues to free bloated programs full of bugs, and we continue to buy! Having satisfied Apple with iTunes (FREE program) an iPhone and the iPad, I will buy Apple computers in the future. Why? Well, first of all... they WOR