Impossible to run old Basic programs TurboBasic and GWBasic

Similar Questions

• IMPOSSIBLE TO RUN SOME WINDOWS PROGRAMS

  I'm using windows 7 ultimate, I installed Malwarebytes Anti-malware and performed a complete analysis. After the scan, some infected files were shown and I removed the and then to restart my PC. After the reboot, I'm not able to run cmd.exe and even other windows programs. I can't open same "msconfig". I get an error when I try to open them. The error was "the application could not start properly (0xc000142). Click OK to close the application ' I can't install software and games even more, I get the same error code. I get the same error, even in safe mode. I was faced with this problem for a year, but even now I can't fix it. I tried the system restore, but I can't always fix that. I need help of expertist.

  Restart your computer

  Press f8 during the boot

  Select 'start windows with command prompt '.

  Press enter it.

  Now type the comand

  sfc/scannow.

  Hope it will work.

• Is it possible to use an old dos program in Windows 7?

  Is it possible to use an old dos program in Windows 7?  Much needed.

  Perhaps. This will depend on the DOS program and if you have a version 32 or 64 bit Win7. It is impossible to run some DOS programs natively in Win7 64-bit. If you have Win7 32 bit, you can try running in Compatibility Mode. See & Win7 support for more details. If it does not or you have Win7 64-bit, create a virtual machine running BACK instead with a virtualization software such as MS Virtual PC , VMware Workstation or VirtualBox from Sun . Also check out DOSBox it's maybe the best solution for you.

  MS - MVP - Elephant Boy computers - don't panic!

• run MS-DOS programs in Windows VISTA 64-bit

  You want to run old DOS program on a computer with Windows VISTA 64-bit operating system.

  Hi BrynMawr,

   

  64-bit Windows supports all 16-bit applications, so you will not be able to run the MS-DOS program based on 64-bit Windows.

   

  I hope this helps.

• When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  When you run an old compiled Basic program I get a corrupted message message string space, which has never happened before

  hch17

  I suggest that also ask you your question to the MSDN Visual Basic Forum

  Visual Basic general forum

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  Don't forget to register

  1 Basic version of the program has been compiled with

  2. the current PC operating system

  3 environment if used programmatically

• How to connect to a windows OS to IOS and run a windows program?

  Hi all

  I would like to know if possible to run a windows program (i.e. DIR or WINVER) on a machine windows on the network via a computer of IOS command line is connected to the same network. Basically, I have 2 computers in a network, a MAC OS and the other is WINDOWS. MAC OS I want to run a command of windows inside the windows machine.

  For example, via the terminal in my mac I want to connect on the windows machine, and run any windows program I have in the windows machine.

  I know it's possible to do on linux via the command line WMI Windows Management Instrumentation command-line.

  Do we have something similar to the WMI for IOS command line?

  Rodrigo.

  I'm confused. You mention a PC (Windows OS), Mac OS (Apple computer) and iOS (Apple iPod touch, iPhone and iPad operating system).

  You can get apps that allows a computer iOS to use a computer mac or Windows computer such as LogMeIn or GoToMyPC.

  Yu can also get the app that allows you to use your Mac to access a PC.

• ? Error: stacks overflow running an old back program

  I'm trying to run an old DOS program in Vista and XP and get this error message:

  ? Error: stack overflow

  Error code 2000

  PC = A748: 0006; SS = 4 CA 1, FP = 0006, SP IS A734
  The program used to work fine a few months ago, but now nothing.
  I tried adding "STACKS = 64, 512' config.nt and which did not help."
  Can someone help me make it work?
  Thank you

  If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, you cannot run Windows XP mode, but you can try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other 3rd party software virtualization and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  For a program of oldest back, I saw DosBox recommended by others. I think it's a free program. You may need to do some research.

  Thank you

  Marilyn

• A way to run old programs (1995/96) on Windows 7?

  I need to get videos of the screen of the old formation automated programs that I created a long time ago (one of them already in 1995). Is it possible to install these? I have Virtual PC running with XP mode, but I can not install.

  I need to get videos of the screen of the old formation automated programs that I created a long time ago (one of them already in 1995). Is it possible to install these? I have Virtual PC running with XP mode, but I can not install.

  If you have Windows 7 or windows 8 her you don't need Virtual Box to install compatible with an earlier version of Windows programs. You can run with the program compatibility Wizard.

  Run the program compatibility Wizard

  1. Open the program compatibility Wizard by clicking the start , clicking Control Panel, clicking programs and then click on use an older program with this version of Windows.

  2. Follow the instructions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab.

• I have a whole new mac running an old AI program... help with fonts!

  I bought a new mac and was able to load my old AI program on it.  However, in the "type" and "police", the names of the fonts/preview are not visible.  Until I have spend above where this information should be.  Any thoughts on how to get the name/preview to show?

  Exactly what Mac operating system and which version of program?

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

• Impossible to draw AP Div Panel to insert, as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver.

  I tried to perform the draw AP Div from the Panel to insert as described in the tutorial "classroom: basic Site layout and Navigation in Dreamweaver", but this option is not available/visible since my last update t CC of Dreamweaver. The only notable thing is that the trainer uses a Mac version of the software. Help!

  CS4 is 6 years old and more.  Much has changed in the web standards and Dreamweaver since then.

  APDivs have never been a good or reasonable way to make primary models.  Today, they are downright impossible in sensitive web designs as in APDivs content is removed from the normal flow of the document.  See the links below for more details on why to avoid the APDivs.

  http://www.apptools.com/examples/pagelayout101.php

  http://CSS-tricks.com/CSS-beginner-mistakes-1/

  If you work with DW CC, you find tutorials to match the version of your product.  CS6 differs greatly from CC and CC 2014.

  Create your first web site in DW CC-

  https://helpx.Adobe.com/Dreamweaver/learn/tutorials/how-to/first-website-part1.html

  Nancy O.

• Problems with the opening of attachments when the user has restristed privilege to run executable code from Program Files and Windows folders.

  I'm trying to prevent users from running potentially dangerous files. According to the Windows policies so I put. Users can run any application Program Files, files (x 86), windows, and folder to all users of the program office. Users have no permission to write anything in this files. When the user double clicks for example document.doc on his desk - document opens fine with MS Word. But when the user tries to open this document in attachment directly (by selecting open with MS Word, instead of the economy) - he sees an error - "this action is limited by local politics. Ask your system administrator. "(not exact text).

   So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
  

  Thanks in advance.
  Calvo is serious.

  PS Sorry for my bad English. It is not my mother tongue.

  Thanks for responding.
  I discovered what was going on.
  This strange "bug" affects multiple computers with Windows 7 Ultimate in my case.
  When you create a SRP (software restriction policies) it creates two rules by default to run programs: windows folder and the Program Files folder. I manually add "C:\Program Files (x 86)" in places without restriction. BUT Windows and Program Files folder to default rules directly, but through registry keys. And this part seems difficult. You CAN run the executable files of Program Files. You CAN run the Program Files (x 86) executables. But if Thunderbird or Firefox try to run MS Word or excel or editor for.doc or *.odt opening or another file - downloaded files running programs blocked by SRP.
  In order to fix this, simply replace the rules for indirect paths like % HKLM/software/microsoft/windows... etc % with direct, for example "C:/Windows" and "C:/Program Files /". After that, everything works fine. Attachments and downloaded files automatically opens without a problem.

• I upgraded to FF 7.0.1 and it not is not loading. If I try to uninstall, it says that it is running. I have uninstalled and rebooted, and installed an earlier version, but the program does not open. Can someone help me please?

  I have tried everything I can think and suggested in your base of knowledge, but FF does not open. I downgraded to a version earlier, but which did not help so I uninstalled everything and did a clean reinstall of the 7.0.1. I restarted at every stage.

  However, when I tried to put my favorite chrome (so I could continue to work) he says that FF was opened. Same thing when I went to uninstall. The Task Manager is not running. Chrome works is not my internet connection.

  I have not installed a new software or hardware recently, although I've improved Roboform to the latest version. This is the reason to update to FF addon RF was not compatible with the version of FF I used.

  I scanned for virus and the machine is clean.

  I'm on a PC running Windows 7 Home Premium. Right now I'm working on my old laptop but I need to FF works on my main machine.

  Any help much appreciated.

  Thank you

  Kathy

  -> Recovery of data from an old profile

  Check and tell if its working.

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.

• Windows 2003 Server keeps stopping every hour on and saying that he must run the Setup program to create a domain controller.

  WINDOWS 2003 SERVER STANDARD EDITION

  HELLO TECH TECHNICAL SUPPORT ENGINEERS.

  WE HAVE WINDOWS SMALL BUSINESS SERVER 2003 STANDARD EDITION,

  WE HAVE EVEN INSTALLED AND CONFIGURED IN A WORKING GROUP, WE DO NOT WANT TO CREATE A DOMAIN CONTROLLER,

  BUT OUR SERVER IS BLOCKING DOWN IN ANY ONE HOUR AND SAY TO RUN THE SETUP PROGRAM TO CREATE THE DOMAIN CONTROLLER.

  PLEASE SUGGEST, AS WE DO NOT WANT TO CREATE DOMAIN

  CONCERNING

  DECCAN TEAM

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• If I upgrade to Windows 7, Windows Vista, which will lose if anything, and I'll always be able to run all my programs for Windows Vista?

  If I upgrade to Windows 7, Windows Vista, which will lose if anything, and I'll always be able to run all my programs for Windows Vista?

  Whether if you lose data/programs, it depends on the upgrade path you choose.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner