Impossible to scan with Windows 7

Similar Questions

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• psc2355p: psc2355 does not scan with Windows 7

  My printer worked fine with Windows XP for a few years. I migrated to Windows 7 and installed my printer. Prints very well. However, it analyzes any more. When you press the "Scan" button it request additional software. I can't find that anywhere on this site of HP.

  Who can help out me?

  Hello again connyveer,

  The programs you listed can stay installed on the computer. They are no trouble to the printer, but they are programs that deal with your computer.

  You will not have a scanner software due to the fact that the pilot and the full functionality of the software package is not available for this printer.

  I have a possible solution to the problem at hand.  Please click on the following link on how to scan from Windows 7 without HP for HP Multifunction printers software.

  Let me know if this information is useful or not.

  Thanks again for your time.

  See you soon,.

• Impossible to scan on Windows XP

  TITLE: am ORIGINAL trying to scan from my computer, no luck

  while trying to scan to the computer, I get an error and said to try the computer. do not know how to

  Hi chief594,

  Thank you for your message and give us the opportunity to help you.

  I see that you have problems with scanning.

  Please answer these questions so that I can better help you.
  1. What is the brand and model of the scanner?
  2. What is the exact error message you get?
  3 have changes made to your computer before this problem?
  4. what program you use to analyze?

  You can read this article on how to scan with the scanner and Camera Wizard.
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/print-scan-fax

  Please get back to us with the required information for we can help you.

• All-in-one HP ENVY 5530: problems scanning with Windows 10

  10 Windows does not recognize the scanner of my all-in-one.  I have no problem with it recognizing the printer and printing.  I removed the device and reinstalled several times.  As soon as I did this I can use the scanner in the device only, but not from the pc.  When I turned off the pc, it disables the scanner and I have to start all over again with delete and reinstall.  What should I do to solve the problem?  Thank you.

  Hi @Anina,

  Welcome to the Forums of HP Support! I see that you have problems with scanning. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  You may need to temporarily disable any Antivirus software, just to be sure, that it is not interfere with scanning.

  I have provided a paper for not being able to scan using Windows 10. If you're still having problems, try one of the applications in step 6 of the document, unless can not analyze after the upgrade, HP printers - printer after Windows upgrade problems 10

  Please let me know the result and if there is anything else I can help you. Thank you.

• Photosmart C309a: Photosmart C309a not scan with Windows 8

  I can't get my scanner to work on one of my computers have Windows 8 - it works perfectly on my desktop with Windows 7.  Is this a compatibility issue or I do something wrong?

  It worked! Thank you very much!

• Since Windows 10 on Dell Studio One, impossible to scan with Pixma MG3100

  Since the installation of 10 window on a Dell Studio One, I was unable to analyze with a Pixma MG3100. I tried to install mp68-victory-mg3100-1_02-ea24, but only the driver of Canon IJ function tool made.  Although the Canon IJ Network Scanner selector EX appears in "Programs and features", it does not show an icon on the desktop.  Turn off the Avast firewall did not help to install.

  An older Dell desktop computer and a PC even older Toshiba laptop using the same printer, but have not had this problem after moving to Windows 10.  (Apparently Dell has nothing to do the Studio One ready for Windows 10.).

  I have somehow missed the essential.  I had to only add the Solution Menu ex and MP Navigator EX 5.0 strangely, I couldn't find the first site of Canon in Thailand and the second in Singapore.

  jamesomorse

• Can not scan with windows 8

  Recently installed WIN 8 - followed all directions for using windows fax and scan and challenging HP scan and capture on all-in-one HP J4680. They return all two 'impossible to find the device"type messages. Printer works fine print and is online as a printer default wifi and scanned fine with win 7.

  Hi rigary,

  I want to help you scan from our Windows 8 operating system. Please first start by printing HP and the Scan doctor.

  HP printing and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems. HP recommends that you run the tool every time that you need to solve a problem.

  Printing and scanning doctor diagnoses and resolves common printing, scanning and connectivity problems, including:

• OfficeJet 4650: Impossible to scan with my new OfficeJet 4650

  I can print with my new OfficeJet 4650 but the scan function does not work.  I tried using my Windows 7 computer and my windows 10 2-in-1 nothing.  When I start printing and scanning doctor I am getting 2 different error messages:

  Windows 7: "Device Manager is an error that requires a restart of the computer."  I restart and rerun the utility but the same error message appears.

  10: "HP Twain Scan Windows error" - I unplugged the printer, waited 60 seconds, plugged back in and turned on.  Then I restarted my computer and represented the utility and received the same error message.

  Can someone help me with one of these errors?

  Thank you.

  Hello
  
  Thank you for using the HP Forums.

  You can tr to uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!

• Impossible to scan with 6700

  Try to analyze with 6700. Error analysis of messages cannot take place because of no communication.

  Fine prints.

  Using of Windows 7, 64-bit, no printing problem other than occasional abandonment commection (wired or wireless).

  To the point received a message saying that I had to be an administrator, but has been unable to locate where to connect.

  Used also to scan HP DR.

• HP F4580: F4580 - no function scan with windows 10

  Computer sees not the function scan 3 in 1 printer.

  Worked without problem.

  Upgrade to Windows 10.   The printer works, cannot scan.

  The following error code:

  The scanning software was launched with invalid command line arguments

  8 [(-1,0,0)]

  I'm not technical interest.  Did someone come up with a (simple) patch?  It's very frustrating.

  I know I could buy a new 3 in 1 or even a separate scanner, but why should I?   It worked fine before, I etc. ink cartridges.  Oh I hate Windows 10.

  @Janni_b

  You must simply remove the existing printer program and install a new copy of the software.

  Printer:

  Range of all-in-one printers, HP Deskjet F4580

  Full software features:

  File name: DJ_AIO_06_F4500_140_408 - 5.exe

• Dell Latitude: Scan with Windows 10

  I have a HP Deskjet 3520.  in a moment of pure, pure madness, I've upgraded to Windows 10.  Now my printer won't scan to my computer in pdf format.

  If I try to scan to PDF it is right there with a message "connecting to a computer" which remains for about 5 minutes, then he told me "the computer does not respond.  Check that the USB cable is attached or wireless works correctly and try again."  Yep, check it out and try to print of tp.  Yes, so the computer is obvioisly talk to the printer, try scanning in format PDF - not just the same message.

  Previously, he fortunately scanned word copy paper in pdf documents but not now.  My computer is a Dell Latitude E5500, already served by Windows 7.  Now I don't know even how to find out what is my basic computer.  I don't know that Windows (Microsoft I guess) kept sending messages that my upgrade was ready and that if I install all my data and stuff would be ok.  Well, it's not ok.  I don't want to do something harmful - I just want to be able to scan documents to PDF, so I can send by e-mail.

  Hello

  Thank you for using the forum.

  You have installed the FULL features software for your printer?

  If you haven't, here is the link for the download.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5162505#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the printer, you should be able to use the software of the printer to scan.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• HP Deskjet Ink Advantage 3830: How to scan with windows 10 pro

  I'm running on Windows 10 Pro on my HP ProBook laptop and have reinstalled the software complete printer Deskjet 3830. I am trying to scan multiple pages into a single document from the document feeder, but it keeps scanning as multiple files .jpeg only. I searched the windows fax and scan app and you do not see an option for files .pdf on the drop to the bottom of the file type. Screendump below. How can I get the .pdf file type option available and how to scan multiple pages as one? I do not have acrobat reader installed DC. Help will be appreciated.

  

  Analysis of the issues...

  Please try this scanning solution:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know.

• V525w printer not scan with Windows 8.1

  To set up a new Inspiron 17 (5000 series) running Windows 8.1 (64-bit) and it has detected my printer all-in-one of V525w (via USB) and it prints well, but it won't scan. Dell printer host tells me to install drivers to scan to.  I have installed all drivers for this printer several times and I still get the same result - I can't scan.  Someone at - it link to install only the driver for scanning or know how I can fix this?  Thank you!

  Solved!  Don't know how this happens, but after I installed the driver package, a Scan icon appeared in my apps list that works.  So, I can't scan by opening printer Dell or by clicking home on via Control Panel of devices & printers, but I can scan successfully opening the scanning application.