Impressora print impress o

Similar Questions

• Impressora print impress o bjc-85

  irda printer is not working

  can you help me

  Hello

  1. what exactly is the problem you face?

  2 are you face any problem when printing?

  3. What is the brand and model of the printer?

  4. you get any error message?

  5 have had any changes made to the computer before the show?

  Please provide us with more information on this issue to help you best.

  Select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Panel.VI printing using versions 6.1 and 8.6

  I have a large version 6.1 program that uses print panel.vi to print a report long text to the default printer, which is where print impressions from panel.vi; However, I need to change the default printer so that I can use this vi to print on several different printers, spread throughout our intranet.  Any comment on this is welcome.  Also, I thinking about moving to LabVIEW 8.6, which is what I've used on other projects, and I noticed that there is an impression panel.vi in this version which seems to allow to specify various printers via a new input parameter that did not exist in version 6.1.  Is this true?  And I can't use the reports library to do this, otherwise this would have been my first choice.

  Hi Hounddog,

  In 8.6, there is a printer name entry allows you to specify that your printer name provided that it is on the same network as your PC. I hope this helps!

  Gregory C.

• HP Envy 110: HP Envy 110 Missing lines on print

  The printer impression leaves lines including half superior of the whole sentence is missing.  This happens throughout the page in several places.  I though it was a computer problem.  I unplugged and just print through all trials and alignments, and cleaning.  Same printing diognostic printer settings page it prints the same, not connected to a computer.  Yet once, ran all tests and cleanups and changed ink. so no need to ask me to make them again.  It is obviousely a problem in the printer.  Have you seen this problem before? Any ideas on how to fix it?

  Hi Robespierre36,

  At the bottom of the document I linked you is a corrector of collateral by serial number.  This will allow you to see if you are in or out of warranty.

  If you click Printers in the upper part of this page will be linked to HP shopping and you can see some of the new printers you can buy replacement if your printer is no longer under warranty.

  I'm sorry that troubleshooting has not recovered the impression for you.

  Jean

• My printer just stopped printing

  My printer was working fine, then stopped wifi nor air print impression. Still, print from usb.

  Please read this post then provide some details.  What printer model? What operating system?  There the error messages on the computer screen or the printer?

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• DeskJet 2050 does not print post format more?

  Hello

  DeskJet 2050 all-in-one

  Win 7

  I had HP printers for years and all my other printers had a setting in the sofrware who would let you print impressions in format post on multi sheets of pf you would then tape together. I find that on my new printer. I used this setting a lot and now find I need it again and I don't know what to do?

  Susan

  Hi Susan,.

  The print feature post is more provided by the most recent drivers.

  However, you can still use the feature using an Alternative driver as a workaroud:

  First step: check the current printer port.

  Enter Control Panel > devices and printers.

  Right-click the printer icon, and then click printer properties.

  Click on the Ports tab, and take note of the track selected for your printer.

  Step 2: Adding a pilot alternative:

  Enter Control Panel > devices and printers.

  Click Add a printer.

  Click Add a local printer.

  Leave the Port of existing use marked, select the port used by your printer from the drop-down list, and then click Next.

  Click the Windows Update button, leave a few minutes to complete the update process up to what the list printers appear again.

  Select HP in the Manufactor Colum

  Select HP Deskjet 6940 series / HP Deskjet series 6980, and then click Next.

  Follow the steps to complete the wizard and then print using the configuration newly driver printer that includes the desired option.

  Kind regards

  Shlomi

• Reference Dell 3100 cn - prints light down left side

  Had problems with my 3100 cn laser printer impression of light on the left side of each page, so I bought a new drum thinking that was the problem, but it did not work. I use Dell toner and toner levels are fine, so I wonder why the print quality is poor? Ideas please!

  Thank you

  Paul

  paulchapman31,

  Try to clean the toner by following the information below.

  A wand of cleaning for cleaning the printer is installed on your printer.
  1. open the front door.

  2. remove the scroll bar that is inside the printer right up to the stop.
  Access window cover slides open.

  3. hold the cleaning rod and push the stem and shoot once to clean the inside of the printer.

  4 move the slide to its original position.
  5. close the front cover

• Unsupported personality: PCL - HP Laser 1010 printer problem

  I have installed my HP Laserjet 1010 with the software for HP1015 in Windows 7. Yesterday, I was able to print. This morning was an update of Adobe and now my printer doesn't work anymore.

  Can someone help me with this?

  Hi Vijay B,.

  I don't get a message on my computer, but on the paper, and it is "unsupported personality: PCL.
  Your en 1 2 method did not work, but now I have installed another pilot and my printer :-) impressions
  Thanks for your help.
  Erna

• Printing - Officejet 4200 series

  I have a Windows 7 operating system, and as the original CD supplied with the printer couldn't work with the operating system, I got Windows download the correct driver/software over the Internet.  Now, however, the printer is not printing duplex correctly.  When printing duplex, we supposed to to print before backward, then after reintegration of paper, in the back to the front.  If she did, the instructions for two-sided printing from the menu of teaching he gives, you can press OK to tell him you turned the pages autour and it allows to print the next side, would work in reality and realize printing double-sided with the printed pages so that page 2 has no page 8 print at the back there.  I looked at the settings, and there are only two options: front, rear and back to the front.  I can't find where to make them replacement for two-sided printing, BUT I KNOW that IT CAN, as he has done for the past two years on another computer.  Is it a driver issue or a setting I need to change?  And if it is a driver problem, if HP will accept your comments because I couldn't find anywhere to send such a message.  Thanks to anyone who responds!

  I'm afraid that it is a result of the printer not directly helping Windows 7.  I'm sorry.

  The used driver is a driver very very basic and many features are no longer present.  The method used before was manual duplex printing, but this was done by the software.  Unfortunately, the software option is no longer available.

  The method, I want to talk about is different because the user is physically duplexing their print job.  To do this make two different printing entirely.  It's not selecting print a time and choosing print double-sided.  This will depend on the software.  I for example, select print odd only in Word 2010.  After that print impressions from work, I turn the paper and load the paper in the printer.  I then click on print again, but by selecting print even this time.  This displays duplex without no duplex option available.  It's just using the options available in the programs that you print from print.  The only reason that this method will not work is if the program printing to not have the strange impression or print same options available.

  It is going to be no other way to achieve what you want with this printer and Windows 7.  If you want the printing in Windows 7, I recommend upgrading to a printer that supports double-sided and Windows 7 printing.

• Lightroom 2015.6 black prints and colors wrong

  Hi I use Lightroom 6.5.1 since all my prints and print fantastic, I have the epson printer AND-2550. I decided to update to the latest version of lightroom 2015.6 2 days ago and now all of my prints are dark and the colors wrong I tried reseting lightroom and install and reinstall everything and he still did the same thing, and every time I cool back to LR 6.5.1 or 5.7.1 the impressions doing well and looking very good one can shed light on what the problem is becsaue I can't afford to keep waste of good paper I will attach a photo of a photo printed impression of him and the impression that is bad on the same piece of paper thanks a lot

  Hi all

  This issue should be fixed in the 2015.6.1 CC update that went live today. Please upgrade to Lightroom to the latest version. Check out the link Lightroom CC now available 2015.6.1

  Kind regards

  Assani

• All-in-One Photosmart 3210 error messages

  When it works the 3210 did a wonderful job. I am running Vista Home Premium on an HP Pavilion a6234x Desktop PC, automatic updates from Microsoft. Starting and restarting, I consistenly get an error as follows: "worker HPProduct - the component you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder containing the installation package "hpproductassistant.msi 'in the box below."

  I tried both of the suggested points, but the 3210 continues to be unusable. I uninstalled and reinstalled a dozen times using HP downloads Web site. Every time, the download and installation are shown to be successful and the unit is 'Ready to use'. I took care to specify (if requested) I'm on Vista Home Premium. The ink cartridges are full, it lights correctly, the paper is loaded, etc.. The HP Print diagnostic utility always displays a problem with the Print Queue. When it is fixed and I delete or don't delete pending print jobs and try to print to aqgain, the printer does not always work and goes back to work stuck in the queue for printing impression. Printing a test page also does not work. I ran my anti-virus program, Microsoft Malicious Software Removal Tool and Windows Defender, with a deep analysis and complete. All have resulted in no malware found. Any help to fix this would be greatly appreciated. Thank you!

  It was purchased in March 2006 and until a year ago, has been used on another computer running Windows XP, SP2.

  Hello

  With regard to the question of the "HPProduct Assistant - the component you are trying to use," click here to solve. As you experience the problem HPProduct Assistant, find and highlight this product HP Assistant in the window cleaning of Windows, and then select Delete. Restart your computer after you complete these steps to check if the window is no longer reappear.

  And in the issue of the print queue, try this:
  > start
  > all programs/programs

  > Accessories

  > right click on command prompt

  > select run as administrator
  > enter the following command in the command prompt window
       SC CONFIG SPOOLER DEPEND = RPCSS start = Auto

  then press on enter key on your keyboard, then exit

  Let me know if they work...

• Nican.dll call python questions

  Hi all

  I have a feeling that this issue will be left without an answer, but I'll ask anyway.

  For a project, I need to use Python2.7 to receive frames from a bus.  What I have to do is monitor CAN all traffic on the bus, I have to send frames.  I searched (and searched and searched) for some sort of solution to this, but have found none.  Here's the code I have so far:

  Test #CAN using Python

  types import *.
  import table *.

  #Load DLL
  CANdll = cdll. LoadLibrary ("NICAN.dll")

  canName = c_char_p ("CAN0")
  canNumAttr = c_ulong (8)

  # Define constants
  NC_TRUE = c_ulong (1)
  NC_TRUE = c_ulong (0)
  NC_CAN_MASK_STD_DONTCARE = c_ulong (0x00000000)
  NC_CAN_MASK_XTD_DONTCARE = c_ulong (0x00000000)

  # The values taken from nican.h
  #NC_ATTR_BAUD_RATE = c_ulong (0 x 80000007)
  #NC_ATTR_START_ON_OPEN = c_ulong (0 x 80000006)
  #NC_ATTR_READ_Q_LEN = c_ulong (0 x 80000013)
  #NC_ATTR_WRITE_Q_LEN = c_ulong (0 x 80000014)
  #NC_ATTR_CAN_COMP_STD = c_ulong (0 x 80010001)
  #NC_ATTR_CAN_MASK_STD = c_ulong (0 x 80010002)
  #NC_ATTR_CAN_COMP_XTD = c_ulong (0 x 80010003)
  #NC_ATTR_CAN_MASK_XTD = c_ulong (0 x 80010004)

  # instantiate the table a
  canAttrIdList = (c_ulong * 8))

  # Fill the values in the table
  canAttrIdList [0] = c_ulong (0 x 80000007)
  canAttrIdList [1] = c_ulong (0 x 80000006)
  canAttrIdList [2] = c_ulong (0 x 80000013)
  canAttrIdList [3] = c_ulong (0 x 80000014)
  canAttrIdList [4] = c_ulong (0 x 80010001)
  canAttrIdList [5] = c_ulong (0 x 80010002)
  canAttrIdList [6] = c_ulong (0 x 80010003)
  canAttrIdList [7] = c_ulong (0 x 80010004)

  #NC_ATTR_BAUD_RATE = 500000
  #NC_ATTR_START_ON_OPEN = NC_TRUE
  #NC_ATTR_READ_Q_LEN = 100
  #NC_ATTR_WRITE_Q_LEN = 0
  #NC_ATTR_CAN_COMP_STD = 0
  #NC_ATTR_CAN_MASK_STD = NC_CAN_MASK_STD_DONTCARE
  #NC_ATTR_CAN_COMP_XTD = 0
  #NC_ATTR_CAN_MASK_XTD = NC_CAN_MASK_XTD_DONTCARE

  # instantiate table a
  canAttrValueList = (c_ulong * 8)

  # Fill the values in the table
  canAttrValueList [0] = 500000
  canAttrValueList [1] = NC_TRUE
  canAttrValueList [2] = 100
  canAttrValueList [3] = 0
  canAttrValueList [4] = 0
  canAttrValueList [5] = NC_CAN_MASK_STD_DONTCARE
  canAttrValueList [6] = 0
  canAttrValueList [7] = NC_CAN_MASK_XTD_DONTCARE

  returnValue = CANdll.ncConfig (canNumAttr, canAttrIdList, canName, canAttrValueList)

  CODE ##END

  Which causes this error:

  Traceback (most recent call changed):
  File "C:\Users\Chadwick\Dropbox\Senior Project\CAN\NI-CAN\ITB CAN\test.py", line 63, in
  returnValue = CANdll.ncConfig (canNumAttr, canAttrIdList, canName, canAttrValueList)
  ValueError: Procedure called with not enough arguments (missing 16 bytes) or bad calling convention

  It seems that I am not calling the function correctly.

  Yes, I understand that nor is not supported by the Python.  However, any help with this is appreciated.

  Thank you

  He is the labour code.  I question the material for how many images of waiting there, then read them individually as I'm having no luck using ncReadMult.  If someone needs to do this, here's a starting point.

  /thread

  types import *.
  import table *.
  import sys
  import of struct
  time of import

  #Load DLL
  CANdll = windll. LoadLibrary ("NICAN.dll")

  NC_ST_READ_AVAIL = c_ulong (0x00000001)
  NC_ATTR_READ_PENDING = c_ulong (0 x 80000011)

  # HEADER INFORMATION RELEVANT C
  # typedef NCTYPE_INT32 NCTYPE_STATUS;
  # typedef NCTYPE_UINT32 NCTYPE_OBJH;

  ##typedef struct {}
  # NCTYPE_ABS_TIME Timestamp;
  # NCTYPE_CAN_ARBID ArbitrationId;
  # FrameType NCTYPE_UINT8;
  # NCTYPE_UINT8 DataLength;
  # NCTYPE_UINT8 data [8];
  #} NCTYPE_CAN_STRUCT;

  class CAN_STRUCT (Structure):
  _fields_ = [("Timestamp", c_ulonglong),
  ("ArbitrationId", c_ulong);
  ("Frames", c_ubyte);
  ('DataLength', c_ubyte);
  («Données», c_ubyte * 8)]

  CAN_receive_buffer = (CAN_STRUCT * 1000))

  Status = c_long (0)
  CAN_HANDLE = c_ulong (0)
  #CAN_data_size = c_ulong (sys.getsizeof (CAN_receive_buffer))
  CAN_data_size = c_ulong (17600)

  CAN_received_size = c_ulong (1)
  CAN_NAME = c_char_p ("CAN0")
  canNumAttr = c_ulong (8)

  # Define constants
  NC_TRUE = c_ulong (1)
  NC_FALSE = c_ulong (0)
  NC_CAN_MASK_STD_DONTCARE = c_ulong (0x00000000)
  NC_CAN_MASK_XTD_DONTCARE = c_ulong (0x00000000)

  # The values taken from nican.h
  #NC_ATTR_BAUD_RATE = c_ulong (0 x 80000007)
  #NC_ATTR_START_ON_OPEN = c_ulong (0 x 80000006)
  #NC_ATTR_READ_Q_LEN = c_ulong (0 x 80000013)
  #NC_ATTR_WRITE_Q_LEN = c_ulong (0 x 80000014)
  #NC_ATTR_CAN_COMP_STD = c_ulong (0 x 80010001)
  #NC_ATTR_CAN_MASK_STD = c_ulong (0 x 80010002)
  #NC_ATTR_CAN_COMP_XTD = c_ulong (0 x 80010003)
  #NC_ATTR_CAN_MASK_XTD = c_ulong (0 x 80010004)
  #NC_ATTR_LISTEN_ONLY 0 X 80010010

  # instantiate the table a
  canAttrIdList = (c_ulong * 9))

  # Fill the values in the table
  canAttrIdList [0] = c_ulong (0 x 80000007)
  canAttrIdList [1] = c_ulong (0 x 80000006)
  canAttrIdList [2] = c_ulong (0 x 80000013)
  canAttrIdList [3] = c_ulong (0 x 80000014)
  canAttrIdList [4] = c_ulong (0 x 80010001)
  canAttrIdList [5] = c_ulong (0 x 80010002)
  canAttrIdList [6] = c_ulong (0 x 80010003)
  canAttrIdList [7] = c_ulong (0 x 80010004)
  canAttrIdList [8] = c_ulong (0 x 80010010)

  #NC_ATTR_BAUD_RATE = 500000
  #NC_ATTR_LISTEN_ONLY = NC_TRUE
  #NC_ATTR_READ_Q_LEN = 100
  #NC_ATTR_WRITE_Q_LEN = 0
  #NC_ATTR_CAN_COMP_STD = 0
  #NC_ATTR_CAN_MASK_STD = NC_CAN_MASK_STD_DONTCARE
  #NC_ATTR_CAN_COMP_XTD = 0
  #NC_ATTR_CAN_MASK_XTD = NC_CAN_MASK_XTD_DONTCARE

  # instantiate table a
  canAttrValueList = (c_ulong * 9)

  # Fill the values in the table
  canAttrValueList [0] = 500000
  canAttrValueList [1] = NC_TRUE
  canAttrValueList [2] = 100
  canAttrValueList [3] = 0
  canAttrValueList [4] = 0
  canAttrValueList [5] = NC_CAN_MASK_STD_DONTCARE
  canAttrValueList [6] = 0
  canAttrValueList [7] = NC_CAN_MASK_XTD_DONTCARE
  canAttrValueList [8] = NC_FALSE

  # Configure the equipment CAN
  Status = CANdll.ncConfig (canNumAttr, canAttrIdList, CAN_NAME, canAttrValueList)
  If Status! = 0 :
  "Printing on"ncConfig"error
  Status of printing

  Status = CANdll.ncOpenObject (CAN_NAME, byref (CAN_HANDLE))
  If Status! = 0 :
  "Printing on"ncOpenObject"error
  Status of printing
  impression CAN_HANDLE.value

  Time.Sleep (1)

  Try:
  Status = CANdll.ncAction (CAN_HANDLE, c_ulong(0x80000001), 0)
  If Status! = 0 :
  "Printing on"ncAction:start"error
  Status of printing
  impression CAN_HANDLE.value

  I have = 0
  ##string = "" data: "".
  String = «»

  pending_CAN_frames = c_ulong (0)
  while I<>
  Status = CANdll.ncGetAttribute (CAN_HANDLE, NC_ATTR_READ_PENDING,
  32, byref (pending_CAN_frames))
  Print "waiting for frames: %d" % pending_CAN_frames.value
  If Status! = 0 :
  "Printing on"ncGetAttribute"error
  Status of printing
  for n in range (0, pending_CAN_frames.value):
  Status = CANdll.ncRead (CAN_HANDLE, CAN_data_size,
  ByRef (CAN_receive_buffer [n]))
  for n in range(0,pending_CAN_frames.value):
  for j in range (0, CAN_receive_buffer [n]. DataLength):
  String = string + '%x' % (CAN_receive_buffer [n]. Data [j])
  print '% X\t%d\t%s' % (CAN_receive_buffer [n]. ArbitrationId, CAN_receive_buffer [n]. DataLength, string)
  String = ' ' #reset chain
           
  I += 1

  # ALWAYS CALL LAST
  Finally:
  Status = CANdll.ncCloseObject (CAN_HANDLE)
  If Status! = 0 :
  "Printing on"ncCloseObject"error
  Status of printing

  /thread

  I hope this helps someone in the future.

• HP psc photosmart 2410: align ink cartridges

  I replaced the cartridge three-color No. 57 and the display showed ' align the print cartridges - Press OK to print the Page align.

  I pressed 'OK' and a page was fueled and the printer made looks like fine print, 'impression' was displayed and then he stopped and the same "Align" message was displayed.  I went to this cycle several times and was never able to print an alignment page.  I can't get rid of the message and therefore I can't use other functions; scan, fax or copy.  I can always print pages of the computer, however.  Does anyone know how to reset or escape from this situation?  Help, please.  Thank you.

  Hi @LCWaite

  I understand that you are having problems with your HP PSC 2410 Photosmart all-in-one printer for the replacement of the tri color cartridge. Please use the following document to solve the problem and I would like to know the results of your efforts; Error message: align the print cartridges, press OK to print Align Page.

  I hope this helps.

• Center of HP PSC 1410 XP Solution

  I have recently re built my PC with a new SSD and have got to the stage where I need to re - load drivers HP & Solution Center HP for my PSC 1410. I am running Windows XP - SP3.

  I have the drivers for the printer impression but cannot find the software for the HP Solution Center, without which I can't scan or photo copy etc.
  Any suggestions someone please?

  Hi Waterboy 71,

  Yes, it worked!

  I downloaded the ' PEH-AmericasEuro1 - Express_NB.exe' according to the link you kindly sent, installed and all the familiar functionality again got back to my trusty ol' PSC1410 '.

  Thank you very much for your support and your help.

• Want 5660: paper jam

  My printer repeat me that it is jammed paper but once I cleared paper that he said distillers I'm stuck. Any ideas to erase it.

  Website says as I have not printed impressions and not connected to the line. I know this is not true.

  Hi @jcpete,

  Thank you for showing interest in the Forums of HP Support!

  I see that you are unable to remove the paper jam on your HP ENVY 5660 e-all-in-one printer. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  The printer is in an error state, therefore, it won't give you an accurate reading until the issue is resolved.

  To fix the paper jam error message, please follow the steps in this guide:

  • "Paper jam" error

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this information is useful. Please reply to this message with the results. Good luck!