In the menu "arrange by" name does not sort by alpha?

Similar Questions

• How to return to changes saved when the menu of 'come back' does not include the version of the document I'm looking for?

  Hello, I use Pages. I worked on a document for several days, save the changes on the way. I have closed or saved the document and asked a question about saving the changes. I pressed on continue, thinking that I was saving my document. It seems that the computer has erased all changes I made since I finally opened the document. The document says he was created today, and none of the versions of my last week of work are available. I want to restore a version with all my important revisions. The menu 'Browse all' and 'Come back' do not have one of my newer versions. Is it possible to find?

  It is important that you have all the hours of backups Time Machine on an external drive. If open the recent item and return to the menus avail you nothing...

  Open a Finder window. In the search window, type the following line, replacing the date with the one that is relevant to the review date that seek you. The following explains show me all the documents pages that have been modified since the specified date. The same syntax works in the Spotlight window.

  modified: 15/12/15, genre: pages

  Also check iCloud drive.

  If it does not find the file you are looking for and you don't have a Time Machine backup, you've learned an important lesson or two.

• When I click on 'computer turnof' in the menu bar start button does not?

  When I click on 'tour of computer' on Start menu button holder, not working

  Hi Ilija VldimirovicKorac,

  (1) since when are you facing this problem?

  (2) you get an error message?

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the mouse and keyboard and then try to shutdown\restart.

  Method 2: You can follow the steps mentioned in the article below

  Your computer stops responding when you try to shut down in Windows XP

  http://support.Microsoft.com/kb/313290

  Method 3: See the article below, which deals with a similar question on Windows XP

  Computer does not close properly if selective suspension is enabled
  http://support.Microsoft.com/kb/315664

• The module "Adobe layer Namer" does not appear in the extensions.

  Hi all.

  I use PS cc 2015.

  Well the module "Adobe layer Namer" appear to have correctly installed and appears on my Adobe add-on page, it does not appear under window > Extensions.

  Please notify.

  Thank you

  Dario.

  Did you try to remove and reinstall add on?

  Please disconnect from creative cloud app and then reconnect.

  Concerning

  Jitendra

• How to fix: after upgrade to 31.1, using the list of group name does not, gives the messages this name "is not a valid email address."

  Before the upgrade, I often type in the group alias in the address box, and fills the name of the group. But now when I try to send the message, I get an error that the name that appears "is not a valid email address" and then details how to train the appropriate addresses.

  I deleted the list of my address book personal and recreated to address in my CAP, but the error persists. I have to manually add individual addresses.

  I tried selecting the group from the list in the Contacts pane instead of typing the alias, no change.

  I'm doing something wrong?

  -Mike

  I have new information on this subject.

  It looks like this bug. If you have a Bugzilla account, it would be useful to vote for this issue.

  It seems that lists with a description that includes several words have this problem. The bug report suggests to replace whites "" between the words in the descriptions of these lists with an underscore "_".

  If you don't want to change your descriptions, the other workaround provided still works.

• The menu system default language does not change according to the location that uses in-app

  Hello

  I have an emergency in application if you can reply me as soon as possible.

  In fact, I've implemented localization in application for Os 5.0 for 7.0.But, I extract some problems on specific devices so can you help me out for short.

  My problem: -.

  I use both languages in my application 1. Netherland and 2. English.

  Then 2 type of different scenario produced

  1. whenever the user change language of application at this time menu default language (Close, keyboard and Application Switch) no change. These are the ways that they change language according to the language of the camera. But this problem go get some specific device as 9850 for Os 7.0 and 9300 for Os 6.0.

  2 even conducted no user in another device like 9300 Os 5.0,8900 Os 5.0,9800 Os 6.0, 9900 Os 7.0 and Os 7.0 9320 ect... When this default menu (Close, Application Switch) changing the language according to the language of demand. These are the ways that they do not change language according to the language of the camera.

  Hello

  It's the Os.

  I confirm with the BlackBerry support team.

• CFHeader to set the content-disposition file name does not

  Hello

  
  

  We have the code that creates a workbook with the POI library and then using CFHeader to set name of file with content-disposition, as shown in the code below. After making the content available, we write the Excel workbook in the browser. The code is below.

  
  

  This works perfectly in CF 9 but when we went to SEE 11 we found it doesn't work anymore. The same code works fine in CF 9 but not in CF 11. The file name is ignored and the file is now given the name of the cfm script is called with the correct xls extension.

  
  

  Any suggestions as to what is the cause for CF not CF 9 11 would be appreciated.

  
  

  Code:
  

  < name cfheader = "Content-Disposition" value = "seizure; filename = "#arguments. "FileName #" ">"

  < cfscript >

  Write the workbook in the ByteArrayOutputStream to get the ContentLength

  local.workBook.write (local.outStream);

  local. Len = arrayLen (local.outStream.toByteArray ());

  local.outStream.flush ();

  local.outStream.close ();

  Working now on the display of the browser output stream

  local. Context = getPageContext();

  local.context.setFlushOutput (false);

  Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)

  local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());

  retrieve the output stream from the response to the browser.

  local.out = local.response.getOutputStream ();

  local. Response.Reset ();

  Set the content type and the contentLength

  If the two are not provided, then the data will be displayed not correctly

  local.response.setContentType("application/vnd.ms-excel");

  local.response.setContentLength (local.len);

  write the workbook in the binary output of http response stream

  local.workBook.write (local.out);

  clean things up and close the output stream

  local.out.Flush ();

  local.response.flushBuffer ();

  local.out.Close ();

  < / cfscript >

  Kind regards

  Leslie

  I found the problem. He is not related to the use of the POI library to all. Also we are migrating to CF 11 currently and just try to get things migrated as is. After our migration, we will look at CFSpreadsheet to see if it can meet the demand of our users formatting now.

  It seems that the call to local.response.reset () in CF 11 now clears the response properties, including the elements of headers. CF 9, he should not have deleted them as background. By setting the Content-Disposition response header after this point, the value was available for the browser to use.

  If the default file for a generated file name must be the name of the script creating the name of the file followed by the file appropriate for the file extension.

  The updated code is below, note the lines of code in bold.

  Write the workbook in the ByteArrayOutputStream to get the ContentLength

  local.workBook.write (local.outStream);

  local. Len = arrayLen (local.outStream.toByteArray ());

  local.outStream.flush ();

  local.outStream.close ();

  Working now on the display of the browser output stream

  local. Context = getPageContext();

  local.context.setFlushOutput (false);

  Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)

  local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());

  retrieve the output stream from the response to the browser.

  local.out = local.response.getOutputStream ();

    local. Response.Reset ();

  Send the browser the good content-disposition header

  local.resp = local.context.getResponse ();

  local.resp.setHeader (("string", "Content-Disposition") javacast, javacast ("string", "001438.EPS nt;filename=#arguments.fileName#")); "))

  Set the content type and the contentLength

  If the two are not provided, then the data will be displayed not correctly

  local.response.setContentType("application/vnd.ms-excel");

  local.response.setContentLength (local.len);

  write the workbook in the binary output of http response stream

  local.workBook.write (local.out);

  clean things up and close the output stream

  local.out.Flush ();

  local.response.flushBuffer ();

  local.out.Close ();

• Since the update, the sender's name does not appear on the email list.

  Sender's name does not appear in the preview screen, so I can't tell if it's legitimate or scam email. If I move to junk e-mail, it appears in the preview screen.

  I see the problem now. I can add the column and see the name of the senders. I had installed the Conversations Thunder module, which has a column between. This column is empty. I reinstalled the add-on. It works fine now.

  Thanks for your help.

• Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value.

  Prob Winmail.

  Receive the error message "the server that you are connected using a security certificate that could not be verified that the certificate CN name does not match the passed value. Do you want to continue? ». This started happening after that my laptop has been reformatted. I have synced with Gmail winmail and followed the instructions to do this correctly. By pressing the tab 'Yes' allows me to use winmail, but it's a little embarrassing.

  Using a digital signature?  Check the settings under Tools | Options | Security and also tools | Accounts | Mail | Properties | Security.

  Also, see here (http://mail.google.com/support/bin/answer.py?hl=en&answer=86382) and make sure that your settings are correct.

  Steve

• Unable to join the domain "DNS name does not exist."

  Working on this computer remotely in my company, it has more a problem but at this moment, that we focus on trying to reach the area. We removed everything first to see if it would fix the trust relationship issues she felt the long side not being able to browse the files all computer network or servers.
  When trying to join the field, that's what we get in the dcdiag.txt in the debug folder.
  The domain name 'xxxxx' can be a NetBIOS domain name.  If this is the case, check that the domain name is properly registered with WINS.
  If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "xxxxx":
  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)
  The query was for the SRV record for _ldap._tcp.dc._msdcs.xxxxx
  Common causes of this error are:
  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:
  198.6.1.5
  198.6.100.38
  -One or more of the following areas do not include delegation to its child zone:
  XXXXX
  . (the root zone)
  XXXXX = domain
  Also the listed IP addresses have been changed.
  
  
  I worked on this computer for about 2 days, and then the user is able to work remotely with a server terminal server, they will need access to the server later.

  Reset the network device - completely.  Uninstall the network driver and have someone there install the latest manufacturer.

  Manually enter the DNS information for the DNS servers of your company on the computer - even if it uses DHCP.

  Make sure that its time/time zone is the same as your DNS server.

  Reset all default HOSTS file.

  Ping the DNS server.

  When you join - use the FQDN (mycompany.local, etc..)

• The application name does not change in 2.0 WebWorks

  Hello

  I changed the name of the application in the config.xml file in the www folder. But when I reinstall the application again, the application name does not change. Removal and installation of new but certainly not it's always the same thing with the default name which is «WebWorks app» What is the problem? I couldn't change it.

  Thank you.

  Hello

  It is a known issue with version beta. The name and the icon is changed in the file of the bar, but persists on the device. If you have to deploy the same file on another device appears the correct name.

  The solution is to change the code of the widget as well.

  This will be fixed in the Gold release.

• the menu on the side of my screen does not appear

  I have a windows 8 on an HP laptop. For someone reason why, lately the menu on the side of my screen does not appear when I put my mouse near the right side of the screen. Also when I go to the left side of my screen, it should normally bring up my recent apps, I opened and an icon to go to the home screen, but its not do it either.

  Thank you, all I had to do was reboot m y laptop and it was fine.

• . / deinstall.pl: / usr/local/bin/perl: Bad interpreter: a file or a directory in the path name does not exist

  Hello

  I want to uninstall my OS (IBM AIX) database software, but when I lance./deinstall.pl, I got error with the message:

  «. ' / deinstall.pl: / usr/local/bin/perl: Bad interpreter: a file or a directory in the path name does not exist.

  In usr directoryI don't have any perl file, the same time on another server uninstall procedure completes successfully.

  Anyone have the same problem?

  Thanks in advance!

  ln s/use/bin/perl/usr/local/bin/perl

• Captivate 7 user variables ' $$Learnername$ $", the name does not appear in its entirety...

  I use 7 Captivate.  I created a 'Learnername' user variable and added to the text entry area. However, the display name does not appear on the text of the legend. For example. Rebecca Donaldson has been added in the input box of text on the next page only Rebecca Dona' came.    I tried to increase the size of the text caption, rename the variable and redo everything, but nothing seemed to work.    Anyone know what could be the problem and how to fix it? Much appreciated!

  Insert the vsriable into the legend using the NVI icon the
  tab proprties. You can specify the number of characters to display.

• paid for the subscription, but Muse CC does not work, he asks me the serial number

  paid for the subscription, but Muse CC does not work, he asks me the serial number, any help?

  Hello

  Depending on your operating system, please try the following steps

  Windows

  • Click on the start"" menu. Select "All programs" and then "accessories."
  • Right click on "Notepad" and select "run as Administrator"
  • Click "Continue" on the "Windows needs your permission" dialog box
  • When Notepad opens, click file, and then select open
  • In the file name field, type the following text:
  • C:\Windows\System32\Drivers\etc\hosts
  • If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
  • From the menu, select 'file', 'save' after changing
  • Restart the Muse

  Macintosh

  • Click the "Finder". Select the folder "Applications".
  • Open the "Utilities" folder and select "Terminal".
  • Type the following command:
  • sudo nano/etc/hosts
  • Enter the password associated with the user of the OS when prompted
  • If all of the entries in the host file include keywords such as "adobe", remove these entries. These are used for the purchase of licenses Adobe.
  • Press CTRL + o to save the file
  • Press Ctrl + x to close the file
  • Restart the Muse

  Let me know the result