In Windows XP sr3 NTDETECT failure

Similar Questions

• Windows XP NTDETECT failure

  I'm trying to fix a friends computer, when I try to start the computer, I get an NTDETECT error. Then, I turned off the computer inserted the ERD and he turned his back. Once in the repair screen, I type in the COPY D:\i386\NTLDR it: and when I hit enter I get and answer access is denied. Y at - it a way to get arround this or I have to reinstall Windows from scratch? The computer is a Dell Dimension 2400 running Windows XP or at least it was.

  Hello

  Many times this is caused when the computer tries to boot from the CD-ROM or a diskette not bootable. First verify that no floppy drive or the CD's in the computer, unless you are trying to boot from a floppy disk.

  This error is also known to occur when a memory stick is in a card reader and the computer tries to boot from it. If you have any flash drive or card reader to ensure that no stick of memory is inside the computer. In addition, disconnect all the disks USB, cameras, ipods, iphones, etc. of the computer.

  Resolution:

  Repair the file system boot sector or the master boot record (MBR) also try to fix the Boot file.

  Reference:

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

• HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

  Hi, I had to reinstall windows in a new hard drive after the failure of my hard drive by default. I couldn't find any drivers. Please help me find the drivers for my PC. The ID of material for the missing parts are the following:-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C & REV_00
  

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112
  

  USB\VID_0A5C & PID_21E3

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C & REV_0A
  

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Thank you.

  Hello:

  For the smbus and usb controllers, try the AMD chipset driver.  The first file listed.  Install and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Standard VGA graphics card

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp57269.exe

  BCM20702A0

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp56715.exe

  Ethernet controller

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56952.exe

  PCI device

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56956.exe

  Unknown device

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56957.exe

• Laser Jet MFP M127fw Pro: Windows 10 Upgrade causing failure print

  Installed Windows 10 free update of Windows 8 - everything is going well until an automatic upgrade on August 13, 2015.

  Since the 8/13 patch (?), the Laser Jet Pro MFP M127fw spool print jobs, but do not go to the printer.

  Removed and reinstalled HP provided the CD with the same results.

  Test print at the end of installation OK.

  When you try to print from Outlook 2003, Windows 10 returned two error messages

  It said printer error state.

  Other says something about outbind failure.

  Same feeling of failure for Adobe 11.0.12.

  Word and Excel also

  Name of the default printer in Windows print Manger is:

  HP LaserJet MFP M127-M128 PCLmS Pro.

  HP "AUTOFIND PRODCUTS" set ID's of this printer as:

  MFP HP LaserJet Pro M1136

  Resolved failure printing using HP diagnosctic tool 'HP and Scan Doctor 4.7 printing'.

  Installed an AVAILABLE to update the printer driver.

  Not until the 'WITHDRAWAL of POWER' to restart.

  Everything looks OK now.

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Automatically fix problems of Windows Search, such as failures of corruption, crashes and database startup

  My system is not working too, before a return Wea? I try to fix it, through, Fixit online, got the massage (automatically repair Windows Search problems, such as corruption failures, crashes and database startup)

  I don't know what to do, please help me Salove problem, thank U, Best looks

  :):):)

  first run checkdisk

  If you have not installed recovery console, and then run from the start menu

  go to start, run, type cmd

  in cmd type chkdsk c:/r, and press enter

  type y for Yes and press enter

  Type exit, and press enter

  restart the pc, let checkdisk finish and run again.

  restart the pc and the error persists there?

  Please give an EXACT error message.

  also, make sure that your pc is clean

  !. What is your current antivirus?

  2 follow these steps:

   

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  Remove all found, restart, and run again until analyses race clean, these can be removed later if you wish. Perform analyses to one at a time, please.

• Installation of Windows Vista SP1 KB936330 failure

  My computer tried to install Vista SP1 since 2009.   I have a Dell Inspiron 1526.  Other updates install w/no problem. It downloads and say that the installation was successful, but then you need to restart. When it restarts it goes through a series of 3 parts of facilities only in failure and take an hour at least to get back to what it was originally. It's frustrating.

  The error code I get is: 80080008.
  Help, please!
  Roman R
  E-mail address is removed from the privacy *.
  Help!

  Roman Hello R,

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=910

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  For reference:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  What is system update readiness tool?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

• Windows vista error - catastrophic failure - error occurred during automatic backup of files

  • Windows vista service pack 2
  • error 0x8000FFFF catastrophic failure code
  • update browser GOOGLE chrome
  • Run the disk check, have also partioned disks (supplied with the new laptop), but still keep on this error

  SOLUTION:

  The solution to the problem, I met is the following:

  Step 1: RESTART your computer, press F8

  Step 2: select the first OPTION (depending on the manufacturer of your computer, it may be first or second, and so on...)

  The option is: fix my (the) computer

  Step 4: It will load the same in SafeMode (just an example), select your OWN USER NAME (though more are available), log in as an ADMINISTRATOR (if you are the one)

  Step 5: It will change into a small window asking you connect by using the command prompt: check this option (this may vary according to manufacturing, but it should be there)

  Step 6: Now when you log in you should see X:\Windows\System32 >

  Step 7: Change of disk C, D or E (essentially select your disk where the OS is installed)

  NOTE: If NO leave are present select your ONE and ONLY by CAR.

  If left are, for example: D and E (D contains BONES, E contains - your stuff)

  Select drive with OS, i.e. D drive

  Step 8: After your decision to step 7, it would look like

  X:\Windows\System32\C:

  Step 9: The result would now be C:\ >

  SO BASICALLY WE ARE ACCESSING THE HDD FROM OUTSIDE

  Step 10: Type Chkdsk/r/f

  Step 11: wait for the results

  The first 3 steps will be complete as soon as POSSIBLE, the 4th and 5th stage will TAKE ABOUT 120 minutes (variable, based on the hard drive, the computer specifications and especially your processor)

  The result should tell you more about the DEFECTIVE AREAS, indexing ERRORS and similar stuff, and also they could be repaired.

  When finished: TUPE OUTPUT

  At the end of OUTPUT

  and REBOOT

  step 12: now even ONCE, go to the BACK UP CENTER, launch a NEW BACK UP, it should work :)

  NOTE: I appreciate the incredible help with MICROSOFT research, engineers who were very thoughtful and dedicated to get my problem sorted out and help out me.

  All these steps are suggestions for these engineers, NOT MY JOB: p

  KUDOS TO MICROSOFT AND HIS TEAM!

  See you soon,.

  Jay

  BTW: these guys who gave METHODS of TRIALS AND ERRORS, thanks to you also, I learned a lot.

• Windows media center Vista - failure of a component of recording units

  Hi I had a problkems with windows media center.  When I try to start, the following message appears "component registration failure.  I looked at the form post Jan last year.  There is a solution that has worked for the same problem?

  Hello

  Try to check and clean the boot:

  http://support.Microsoft.com/kb/929135

  It will be useful.

• Re: Windows Vista HP. symptom: failure using the VxD loader.

  I did a check of System Diagnostics and the report came back like: failure using the VxD loader. A device has a configuration issue preventing it from working correctly. Devices: Reader CF USB, USB MS Reader, reader SD USB, USB, xD/SM Reader and MMC storage reports "tv_ConfigMgrErr19". How can I fix it?

  Thank you for your response.  I acted on your suggestion and he returned with the "windows resource protection found no violations of integrity." Then I read somewhere to uninstall and reinstall devices, but I uninstalled devices portable usb cf, ms usb, usb sd and xd/sm in error.  I didn't know how to get them back so out of curiosity I made re the system diagnostic and the problem disappeared, the only mistake was d drive is less than 15% free.  I did something wrong?

• Failure of Windows 7 install (power failure)

  There were 2 second failure yesterday that the computer has installed Windows 7.  He had reached the last step of the installation and was over 60% full.  The computer turns off.  When this guy up, even once, I got the following message:

  "Install Windows".

  The computer restarted unexpectedly or encountered an unexpected error.  Windows Setup cannot continue.  To install Windows, click "OK" to restart the computer, and then run the Setup again. »

  Then it goes to a screen that says, "the installation will continue after your computer restarts."

  After restarting my computer, it starts and gives me the first message asking once again that I have "click OK to restart the computer, and then run the Setup again" and then on the next screen, I get the second message above.  This produces no matter how many times I try to restart the computer.

  I tried to 'press any key for bot to CD or DVD.

  Then, I get a message that "Windows loading files" and a completion bar.  Then I get a screen that says "Starting Windows" and the Windows logo appears.  Then, I get a screen asking me to select the language, time and currency and keyboard or input method.  After that a screen comes up with Windows and 'Windows 7' logo and a box with "install now".  Also on display are "What to know before installing Windows" and "Repair your computer" I tried 'Install now' and 'Repair your computer' with no success.  The "Repair your computer" option tells me that there are no problems that the OS booted successfully.  I got an option at a point using System Restore and tried, but the message came back that there there is no system restore point and asked if I would like to create a.

  The system also asked me sometimes to remove the Windows disc and restart the computer normally and then try to install Windows.  It does not work.  I get the Windows startup screen after what seems to be a normal startup, then it says it's from service before returning to the original message in the upper part of the screen and once again asking me to restart.

  I also tried out the Windows disc and reboot and putting in the disc to the Windows startup screen.  This me come back to the same old message that says I have to reboot the computer because of an unexpected error and the installation cannot continue.

  I don't know what to do from here.  Fortunately, my old laptop XP still works, or I would be entirely without computer.

  What is the solution to this problem?

  Edith

  Try normal mode it self

  Try pressing SHIFT + F10, and the command prompt will open.

  In command prompt type regedit and it will open the registry editor and then try to go to

  HKLM\System\Setup\Status\ChildCompletion\Setup.exe

  Double-click setup.exe, and then change the value from 1 to 3 and press ok data.

  Close the registry editor.

  Close the command prompt, and then click ok.

  computer will restart, and then it will finish the installation.

  In which case you get the new message repeat steps, because it is possible that the registry change has been done successfully.

  Good luck.

  Thank you and best regards,

  Laurent Rodriguez.

• Update Windows 10 is a failure

  Original title: brine of Ms. shirley-anne

  Why do I find windows 10 who tried to download the audit, but a failure, this happens every day

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

  Notes on using Windows Update:
  http://www.gerryscomputertips.co.UK/WinUpdate1.htm

• Windows 7 professional - connection failure: unknown username or bad password.

  I have new xps computers 8700 identical Dell running windows 7 Professional.  The new dells replace the old dell dimension computers Windows XP Edition Professional.  I traced a drive 'f:' of network easily to my server from windows 2000 of the first Windows 7 Professional machine.  But when I tried to map the "f:" network drive on my windows 2000 Professional 2nd new windows machine Server 7 I got the following message: "connection failure: unknown username or bad password."  The computers are identical.  After the introduction of the first professional machine of windows 7 with success and mapping the drive "f:" on my server, I cloned the drive hard so that all my apps and settings would be the same on the second Professional machine of windows 7.   I tried to change the 2nd windows 7 professional name of the computer, but I still regularly get the "connection failure: unknown username or bad password."  Any ideas or suggestions would be greatly appreciated.

  Thanks in advance,

  Ken Preston

  Hello Ken,

  Thanks for posting your question on the forum of the Microsoft community.

  The issue you mentioned will be better suited for the public of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• Pavilion 17-e119wm Windows 8.1 Revovery failure

  I had a bad hard drive and HP sent me a new one with 3 recovery disks. I installed windows 8.1 using the 3 disks and received an installation failure message. No code error, just a message with the option save paper, leave or try again so I retried. Hours passed and I got the same message. Called HP and the woman told me to test for large hard drive. So I wait 4 hours now so that one thing is.

  The disk hard original told me there is an imminent hard drive failure to turn on the laptop each time. Other than that works very well... so far. I've had the laptop almost a month now and this problem started too late for me to go back to the shop, grrr.

  Is it possible for me to use a recovery disc from the original drive to the new? I'll put that again and do one. I don't really want to return the laptop unless there is no other choice.

  "Is it possible for me to use a recovery disc from the original drive to the new? I'll put that again and do one. I really want to return the laptop unless there is no other choice. »

  Yes. It should work because it was created on the same notebook.

• Tecra R940 with Windows 7 SSD boot failure

  My company bought laptop computers Tecra R940 and replace the HDD with Kingston SSDNow v + 200 V + 120 GB SSD drives. On a test after installing the SSD device, the laptop was rebuilt with our brand image (Windows 7 x 64) that has successfully completed.

  Update post however a number of issues is apparent:

  1 occasionally during a restart, the laptop will display and then hang at 'starting windows' screen for the Windows logo animation appear and with the light of the hard drive continuously. After a period of time that a Windows recovery is attempted and, possibly, a reported error:

  Status: 0xc00000e9
  Info: An unexpected i/o error has occurred

  This problem will not occur at every startup, but once every 2 or 3.

  2. the following error message is logged in the Windows system log

  Source: ATAPI
  Event ID: 11
  Description: The driver detected an error in the controller on \Device\Ide\IdePort0

  I have tried the following to resolve the problem:

  1. update the R940 BIOS to the latest available (6.40).
  2. has confirmed that the BIOS SATA Controller is set to AHCI.
  3. not confirmed there are no available SSD drive firmware update.
  4. install the latest Intel Rapid Storage Technology driver of Toshiba (11.0.0.1032).
  5 tried different SSD. Same errors identified, so not a faulty SSD.
  6 tried the SSD in a Toshiba Portege R930. In this case the mistakes above are not apparent.
  7 reinstall the original HARD disk. In this case the mistakes above are not apparent.
  8A confirmed a 2nd unit (with installed SSD) logs the same event ID 11.

  My tests left me at a point where I think that there is something bad at the end of R940 with a hardware or software that does not like the SSD.

  If someone has solved a similar problem or have thoughts on fixing this?

  Thank you in advance.

  Specific installation of corporate images are always full of risks, and quite often, there are different problems. As much as I know in the past Toshiba has created special images of recovery for some companies who ordered a specific number of booklets for employees.

  On this virtual path, it is not easy to say what the problem is here, but I would like to know if you have tried to install own OS Win7 using the original disk of Microsoft.

  I mean that it must be possible to install Win7 clean on the new laptop models. I tested it on my U940 satellite and it works well. I had some trouble with Toshiba specific stuff (tools and utilities), but it was not so important and work with Win7 was possible in any case.