Incompatible NB550D with Advanced - 6230 N?

Similar Questions

• Re: NB550D with win 7 64 bit

  I recently bought a NB550D with c-50.

  There are several discussions around the internet and here about the upgrades. It seems that the 2 are the main challenges or desired things to do with this laptop with equal challenges.
  1 put level memory to 4 GB
  2 install win 7 64 bit.

  I decided to embark on the two, so here I will try to summarize what I have done or have been done to help others who would like to do a similar thing:

  1 memory

  In summary, it seems that the laptop can use speed of DDR3-1066 DDR3-1066 and DDR3-1333. People report that kingston modules have no problem.
  After reading many forums, I decided to buy Kingston DDR3-1333 memory since the 1066 kingston was not available in the shop, I visited.
  I installed it and works well in the original operating system (started) and Ultimate 64 bit (ongoing). The difference is night and day.

  2 Win 7 Ultimate 64 bit.

  After reading around in the forums, it is clear that people have issues with drivers and especially display drivers. Here's what I did so far, although I'm still updating the drivers:

  1 downloaded the driver realtek Lan here:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5 & Conn = 4 & DownTypeID = 3 & GetDown = false

  I downloaded the driver only "Win7 and WinServer 2008 R2 pilot' version 7.049

  (to be edited later need to rush... :))

  Post edited by: tomcat

  Can you please send number of exact model of your NB? I just want you check the specs to see what is the maximum RAM for it.

  Maybe a stupid question now but is there so special reason why you want to have the Ultimate version? You are not satisfied with the original preinstalled OS?

• System refresh actualisations Microsoft Windows Firewall software with advanced opions not found

  Good evening

  When I ask the firewall with advanced fire windows I get the following response: failed to load the snap-snap-in windows firewall with advanced security code error 0xd9 options.

  Thanks for your insights.

  Best regards

  Guy PASCAL

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  http://support.Microsoft.com/common/international.aspx

• Computer infected with Advanced Virus Remover (pavrm.exe).

  Computer of my granddaughter is infected with Advanced Virus Remover (pavrm.exe) and he turned everything. Disable you the antivirus (Cyberdefender), so I tried Ctrl + Alt + Delete, and the Bishop of tasks has been disabled as well. I then tried to go to the control panel to remove the program, and as soon as I clicked on it, the screen went to a blank desktop. I started in safe mode, but still an empty office. Then booted to a command line and managed to find the APR files in several places. Managed to remove a few files from the command line, but when I try to delete others I get "path not found." Many years since I used BACK, so I don't know if I'm in the commands incorrectly or if it's the virus. What should I try? Thanks for your help.

  You must use a second computer - like the one where you post now - go to the site of BleepingComputer, print out the instructions, download tools, etc. Because you can get into Safe Mode command prompt, you can copy the infected hard disk removal tools and use the CD command to navigate to the executable removal tool. This may or may not work for you.  Instead, it is best to start the computer with a rescue CD antivirus such as those offered by F-Secure, Avira, etc.. Or work with a Bart PE with plugins antivirus/antispyware. These "recovery CD" could get the machine in pretty good shape for you to enter Windows and to carry out analyses, etc..

  The easy solution and the best for a severely infected Windows machine must start with Linux Livecd like Knoppix, backup data on an external hard drive and doing a clean installation of Windows. If the girl is a young person, his Windows installation is probably not extremely complex and the clean install etc will be much less time than to use the methods described in paragraph 1. Of course, if you want to spend the time trying to clean instead, it is your choice.

  Standard WARNING: the advanced practice of the malware removal requires a certain level of computer skills. You know better. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

• Firewall Windows with advanced security rules do not take effect immediately?

  Hello everyone, I seem to have a problem with the Windows Firewall with advanced security. I put a rule that should prevent some IP address the ability to send packets to any port on my pc, however, it doesn't seem to work, said ip was still able to send packets until I installed the third-party firewall. That's what 'the netsh advfirewall firewall show = rulename rule name' indicates:

  Activated: Yes
  Direction: in
  Profiles: Domain, private, Public
  Group:
  LocalIP: all
  RemoteIP: x.x.x.x/32
  Protocol: all
  Traversed side: No.
  Action: block
  Protocol used to send packets was UDP.
  Is it normal that the rules from windows firewall do not take effect immediately?

  Thanks for the reply, I checked the Windows Firewall service, it is set to automatic, and two long-term services are started (BFE and MPSDRV). It turns out that the PC was connected to the Public network, while the Windows Firewall has been enabled only for the private profile. Activation of the firewall for the public profile, did the trick.

  Thanks for your comments.

• How to ensure a permanently delete (shift + delete) file has been deleted and is not recoverable with advanced software

  Hi experts, I cleaned my harddrive using shift delete but also normal deletion and then empty the trash. I do so I can prepare to be sold on if I find a moment (and buyer).

  I am told however that this actually does not remove the files but brand only as "too accessible writing." And that it takes a while - depending on how much has been marked to be deleted permanently - for these files too write.

  How can I make sure all the files I want to permanently delete are not recoverable with advanced software?

  How long would it take to write too say 20 GB of data?

  Your feedback is very much appreciated.

  Rgds,

  WV

  Use Google or Bing to search for 'file shredder' or 'secure erase' software which will overwrite files with random patterns of data, making them unrecoverable by most of the efforts.  HOWEVER, please keep in mind that no matter what you do, away from physically destroy the hard drive, there are always ways to recover files even if these files have disappeared in a secure way.  That's why U.S. Federal agencies requiring a high security have their hard drives shredded into metal fragments when they have access to computers.

• Firewall Windows with advanced security and mmc microsoft management console

  I want to know how to run the MMC snap-in. You load them in the tree of the Console at all times? The center column takes them and then what? This thing is huge and I can't find any questions about it on the community boards. I mean, REALLY, it is complex, and I'm sure that most people do not know how it works. Microsoft Management Console. Snap ins someone explain this - start with - that is meant by the snap ins all about and how to use them. Microsoft has a video to watch? Explain the purposes and uses. And how it relates to Windows Firewall with advanced security?
  I just had a "Nerd" pro retrieves a hacker to my machine. The pirate had resumed MMC and Windows Firewall. I want to learn this now.

  Hello

  Thanks for the display of the query to the Microsoft Community. If I understand correctly, you want to learn more about the Microsoft Management Console.

  You can go through the article and check. Here is another article on the Microsoft Management Console. You can navigate on the article for more information about MMC. Here is some additional information on the addition of the software component Certificates snap-in to an MMC.

  You can also view the request here.

  Hope this information was helpful and let us know if you need help in the future about Windows. We will be happy to help you.

• NEW HP ENVEY Centrino advance 6230 N will not pick UP 5G WIRELESS ONLY 2 g?

  -Can you ME TELL WHY MY ALL NEW PORTABLE HP ENVEY 17 J141NA WITH Centrino advance N 6230 CARD without WIRE DO RAMASSERA not 5 G 2 G ONLY, YET MY IPHONE AND laptops more FORMER PICK IT UP WITHOUT PROBLEM?

  just had virgin on the phone and they tried to reconfigure the router that didn't work so they logged onto my laptop so even though I spent  a fortune on this laptop if you run a cmd command......... netsh wlan show drivers
  
  if it doesn't say 802.11a it means you have 5 GHz capability. If not then you don't have it.
  
  only 7 days old and paid £900 for high spec laptop and not 5g compatible!!! NOT HAPPY HP!!!!!
  

• 33.1 incompatible Firefox with Symantec Endpoint Firewall

  This morning, I received a message from Firefox indicating that a new version (33.1) Firefox is available - so I took the auto-update feature. Since the update, I found that Firefox can no longer connect to the internet. Suspect a firewall issue, I disabled firewall Symantec Endpoint and found that Firefox suddenly worked again. Since it is a working PC, I have to keep the active firewall (and I like to do anyway). Symantec does not seem to have any ability to add individual programs as exceptions. We have the ability to allow all IP traffic, or just IP application traffic.
  The new Firefox is simply incompatible with Symantec Endpoint? Why the version that I had (33.0.3 if I'm not mistaken) would have worked without problem?
  As another detail, I would add that when I click on the handler Extension/add-on in Firefox, I see that protection against vulnerabilities Symantec 12.3.0.3 - 1 is not compatible with Firefox 33.1; I guess that's part of the problem? (And if so, should I contact Symantec?)

  Hello! Thank you for your response. Unfortunately, Symantec Endpoint does not allow the user to set individual permissions for applications (even at the level of the administrator). However I solved the problem! I realized that the version of Symantec Endpoint installed on my PC has been 12.4111.4516, and that there is a version more recent (12.5) available. My server of the company does not notify me of new versions of software available - but after I installed 12.5, everything works again. For the other user who also has this problem, even if you do not have access to 12.5, you can see if you can reinstall Symantec Endpoint to see if it works for you.

• 19 incompatible Firefox with the latest update of Windows

  Running Firefox 19 and Vista/Windows 7.

  My computer has had one of these "updated Windows critical update" and installed automatically. Subsequently, he wouldn't have Firefox. Firefox hasn't crashed - he just never started running in the first place. The more information I could get is that Firefox was now incompatible. Malwarebytes is able to connect to the internet, but not to my browser. I did a system restore before the update and everything works for now, but it's only a temporary fix.

  Any ideas would be welcome.

  Hello Catffs, please start firefox in safe mode (by pressing the shift key, while it launches) & go firefox > options > advanced > general & disable hardware acceleration.

  for some information about this, you can also look at bug #812683

• Incompatible modules with firefox 10.0.

  Why the new update of Firefox (10.0) did half my incompatible modules!

  The issue is not with Firefox, but rather the seller or the company who creates or distributes the add-on. It is the organization or company that is the responsibility of the add-on to keep up-to-date with the latest versions of Firefox browser. If a module is not compatible, you can either way for the company to offer an update that is compatible, contact your company, or find an alternative.

• "Re: Toshiba M10: replacement 7 k 200 with Advanced Format HARD drive" 7 K 750 HDD

  Can we see problems with the replacement of the original Hitachi TravelStar 7 K 200 (200 GB) HDD, that went into my two year old Toshiba Tecra M10 - 11 X, with a so-called 'Advanced Format' 7 K 750 (750 GB or maybe 640 GB) hard drive?

  Like the original, I want to dual-boot the new disk using three partitions:
  * Windows 7 32-bit
  * Data
  * Windows XP
  and would probably clone one disk to another (by increasing the size of the partition!) with the v5 of Macrium Reflect.

  I read up on top of the TravelStar 7 K 750 form, the alignment tool from Hitachi, Microsoft KnowledgeBase article 982018 "an update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with the Advanced Format drives is available" Bit-tech http://www.bit-tech.net/hardware/sto...t-hard-disks/1and so forth, but wonder if anyone has actually replaced the HDD with all original Advanced Format drives and could therefore have a certain experience to share?

  Thank you!

  Hello

  "I put t have experience using this advanced Format ' 7 K 750 HARD drive but in my opinion he should not a problem using this HARD drive.
  The laptop supports the SATA interface and if this HARD drive would also support the SATA controller, the HARD drive should be recognized too

  But of course, it is my personal opinion...

• T500 compatibility with Advanced Mini Dock 2504

  Help please!

  I have a mini advanced docking station 2504 I used with my R61 successfully for a few years.

  I recently bought a T500 and was informed by the sales department that my existing 2504 advanced mini dock would be compatible with the T500.

  When I use the mini dock with the T500 no USB port works not at all?

  All the solutions or do I need a different mini dock.

  they are definitely compatible.

• Noise thermocouple with PCI-6230

  What level of noise should be expected for a K type thermocouple used with an acquisition of data PCI-6230 and a map derivation CB-37F-HVD? I read the data with LabVIEW and Daq Assist module on the setting of the thermocouple and the noise see of +/-1 ° C. For a type thermocouple K 41uV / ° C is 3 times the 6230 noise expected (13 uVrms) runs around 0.2 full scale. I think it should be more stable measures or is this a normal behavior?

  http://sine.NI.com/DS/app/doc/p/ID/DS-31/lang/en

  Thank you

  Dan

  This level of noise is expected. To improve, you can use a card with a noise filter. A dedicated thermocouple module would also work, but this includes a noise filter as well.

• incompatible files with files on your system

  When you try to install KB960714 update for IE7 on Windows XP with SP2 or SP3 on Windows XP SP2 with IE7, I had a configuration error that says that the file I tried to install is incompatible with files on my system. What are the files that would be... SP2, Windows XP or IE7?

  Hello

  
  1. Once you get this error message?

  2. What is the full error message?

  3. have you installed new hardware or software before the show?

  4. are you able to install some other updates without any problems?

  5. who is the antivirus installed on the computer program?

  Method 1: Reset Windows update components and check
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Method 2: Disable the anti-virus software if installed some and check.
  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 3:

  Try to upgrade to SP3 of XP and then try the installation again.

   

  How to get Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/322389 

   

   

  I suggest you provide more information about the issue so that we can better help you.
   
   
  I hope this helps.