Incredibly bad beginning of tutorials

Similar Questions

• Support incredibly bad re: membership fees

  I'd say that Adobe did not properly anticipate the level of support that has a subscription plan.

  I've implemented a cloud creative, but mistyped the email account... If an unusable account has been set up... I called and support set up a new account and supposed to be cancelled first.

  Nope... 2 charges next month... Still called via the online chat... No problem.. that bad... canceled issued refund account once again...

  Next month... 2 cool... Called again... this time to talk to a person... has released another refund... ALLLLLLL accounts cancelled... Well, even if I'm billing every month there is a cancellation fees of $45... Is not serious... This will be the 3rd time I've cancelled the original account.

  Now, good customer service would have waived the $45, because of the absence of problem resolution Adobe has been able to provide...

  It's really a shame how difficult it is, in this day of technology, to really make the service customer who works.

  But I would never recommend dealing with Adobe... that has nothing to do with its products... everything just because my customer service experience was so wrong...

  Viv...

  Dear Viv

  Please accept my apologies for the bad experience.  I will consider it with the teams involved.

  I see that the account under the wrong e-mail address is canceled, and refunds were issued for 2 monthly fees.  I will arrange a refund for may charge as well.

  We do not charge cancellation fees of the other members that you have cancelled.

  Kind regards

  Bev

• Sky of memory over time, bad performance rockets.

  I noticed when I come home from work, my Fire Fox is incredibly bad. Tabs take a while to open, has a time mouse wheel scrolling, etc. You tube video could pause and stutter on video but audio is fine. I started to exercise oversight and it is the fact that my wife will open 10 windows, sometimes with tabs, but never completely close all of them. When I get home, its 1, 5-2, 2 GB of memory used in the Task Manager. I tried everything: memory and cluttered with references to facebook, even if no facebook tabs are open. It can have 1 or 2 tabs for recipes.
  The only solution is to close FireFox all together and then open.
  If I lose its tabs open, she gets a little upset, so I have to kill the exe in the Task Manager, so when I reopen it, it will offer to resume the previous session.
  It is a simple touch of the tedious after a few weeks.
  Is there a different command or something I can do to leave current windows hunting fair and open on all used storage space that?

  Hello, these quantities of used memory can't be normal, even with a few windows open. as a troubleshooting step, you can try to reset firefox (this will keep all the Favorites and passwords): Firefox Refresh - reset the parameters and modules

• HP 15-g069cl - graphics card is bad, I was wondering if I can upgrade.

  The graphics card is really bad at the game, and when I mean bad, it's incredibly bad for its specifications.
  
  http://i.imgur.com/Vf2s7Cf.PNG
  
  In the picture above, it puts me in the 0th percentile, when clearly, I shouldn't be.
  
  _____________________________________________
  
  Other useful info:
  
  http://i.imgur.com/89M7ugm.PNG
  
  http://i.imgur.com/89M7ugm.PNG
  
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us & LC = in...
  
  ____________________________________________
  
  I run really low power these games to minecraft at 24 frames per second. And garrysmod at about 20 frames per second. My old laptop was 4 x less power than my current, but played games at about 40 fps.
  
  I tried updating the drivers, but it has not changed.
  
  Anyone know a solution? Thanks in advance.
  
  _____________________________________________
  
  Personal thoughts on why I think it's this way:
  
  I think it's really bad games running because of the integrated graphics card, but can't be too sure.
  
  _____________________________________________
  
  If I can't fix this way, is there a way I can update the graphics card?
  
  Or should I just return it instead?
  
  _____________________________________________
  
  I was wondering if I can upgrade to a graphics of 8750 m? Is this possible? If yes where can I get one? If I can't do it, is there a way that I can spend on a new graphics card? Or do I jut product return?

  I just bought this product yesterday, I was wondering if I can just return it and get it? http://www.Costco.com/.product.100103603.html?cm_sp=RichRelevance-_-categorypageHorizontalTop-_-pers...

  The part number, the other Member has suggested is for a complete motherboard. If your laptop is brand new that will likely violate the warranty. You really want to go this route?

  If you feel that is worth the upgrade of the motherboard and the video, then you would be better to return the laptop. Buy one that has the features you want rather than take the risk of damaging the laptop during disassembly and reassembly.

  @visruth

  Re: 'for the discrete graphics, power supply unit changes may have to do usually. But since it listed as compatible tips in the user manual, which may not be a problem. "This is not correct. Laptop models with maps installed discrete graphics require a 65 Watt power adapter instead of a unit of 45 w.  Be specific in your statements and your suggestions.

• Faces random restart disaster photos

  For nearly a decade, we have used our iPhoto as screen saver library on our iMac 2008 and identified thousands of faces among our 20 K photos. A month ago, we bought a replacement iMac and Apple just told me to throw all this time spent ID'ing faces if I want to stop the new iMac to restart randomly. He did this on average once a day like us he plugged. So we just put discarded 10s of 1000s of ID on 811 different people that my wife and I have spent years ID'ing. Apple, people say there is a corruption happening with the program faces in the Photos used as screen saver (or maybe not) it's trigger these random reboots, based on the journals of captured data, that I sent them a week ago. I wonder if anyone else has had a similar problem. I also wonder if there is a way to "Rename" all these faces runs to leave everywhere, assuming that solve us the problem of random reboot. Ideas are appreciated. I never realized how good iPhoto was until Apple replaced it with incredibly-creatively named pictures developed but incredibly bad (try googling 'Photos' to help... Apple tells me to Google 'Photos Mac', which only highlights the bad thought behind rename it). Thank you!

  He did this on average once a day like us he plugged. So we just put discarded 10s of 1000s of ID on 811 different people that my wife and I have spent years ID'ing.

  Do you still have a backup of the photo library of until you have removed the names of faces?  I would put the faces identified by writing them to the photos as keywords.

  You could open each of your albums of 811 faces, select all the photos in the album, then announces a keyword with the name of faces. That will make it easier to recreate the names to faces if you remove the tags of faces.

  Yes, there are a few newspapers posted crash here with unexplained and panic crashes happening during playback of albums of faces.  I would not sacrifice named faces, however. At least keep a backup, then you can begin only when the next macOS Sierra will be released this fall. It has a totally different treatment of the faces, and I hope that the new code will no longer have this bug.

  Apple people say there is a corruption happening with the program faces in the Photos used as screen saver (or maybe not) which is the outbreak of these random reboots.

  If the screen saver is the cause, you could avoid using your photo library as a source for the screensaver for the time beeing. Perhaps export just your Favorites in a folder on the desktop and use it as the source of the screen saver.

• It is faster to index an initialized matrix or use a tunnel auto-indexed, both inside a loop - what happens?

  WARNING: MATLAB user here.

  Note: This is a question of LabVIEW, not a matter of MathScript.  I just use MathScript to demonstrate the point.

  This is background to the particular question.

  In MATLAB if you want to calculate decent efficiency then you want previously declared tables and want the built-in functions.

  This means that it's slow:

  ICT

  for i = 1: 10000

  ENTRIES = rand;

  end

  T1 = toc

  (t1 = 0.266, so 37.6 elements/MS)

  and it's faster

  % start before the next loop, but not copy - paste with it because it slows down it waaaay

  Claire x

  ICT

  x = Zeros (10000,1);  % If not the ', 1' and then it overflows of memory to MathScript

  for i = 1: 10000

  ENTRIES = rand;

  end

  T2 = toc

  (t2 = 0.205, items so 48.8/MS)

  In MathScript, it is an improvement of 23% at run time.

  ratio = 100 *(t2-t1)/t1

  (ratio = - 23.3)

  When I use LabVIEW for the same thing, I get:

  

  which leads to a computation time of 269 ms for about 10 000 000 elements in a vector.  (Note that this is literally ~ 1000 x faster than MathScript).  He created elements of k ~ 37 per millisecond.

  If I change out for a created matrix indexing, then the time is strange.

  

  When I run it for 10 elements of k, or about 1000 times less, then he finished in approximately 30ms, or approximately 333 items per millisecond.

  When I run it for 100 k items, or about 10 x more last run and 100 x less than the previous vi, and then it ended with about 5000 ms, or approximately 20 items per millisecond.

  The best construction and replace it is running hundreds of times slower, and it is perhaps running ~ 1800 x slower.

  Here's my problem:

  One of these things is 1800 x slower than others.  Why is it reasonable?  Why is-111 x reasonable?  Here are the simple changes.

  I love that LabVIEW is literally 1000 x faster than MatLab in certain tasks.  I need to understand why, in some cases this multiplier 1000 x falls down to a 2. 4 x DECREASE.  Intuition I have is not only wrong, it's incredibly bad.  He's wasting the 1000 x multiplier of speed that I am very happy with.

  My thought:

  If I did it in assembler to nickname the first loop is as follows.

  I point to the stack, call the random number generator to get a value on the stack, incrementing my counter, check if it's 10 million, update my pointer location and iterate.

  The second loop would be as follows:

  Point battery, I write a zero, incrementing my counter, test whether it is 10 million, update my pointer location and iterate.

  then

  I will return to the beginning of the location of the stack, call the generator of random numbers to get a value on the stack, incrementing my counter, check if it's 10 million, update my pointer location and iterate.

  The report of the runtime for loops would be the time difference of calculation-writing-increment of a (pseudo) random number and THEN a zero against writing incrementing from zero.  I expect it to be somewhere between 2 x and 10 x.

  There are BONES.  Perhaps the algorithm to calculate a random number has many steps, like thousands.  Here is the difference between On-die, L2, RAM and disk.  Given enough items I would expect things to have to go through the bottlenecks and get slow.

  You have to shift registers when using him in place element structure. I don't know why, but it is much faster (and a more exact comparison) when you use the shift register.

  

• "Content generation error. The article exceeds the maximum file size limit.

  We build an application editing simple for our University literary and arts magazines and have no problem image previewed through the adobe Viewer application, but when we try to create a Folio so that we can begin the process of the App Store, we continue this annoying error. He refuses to export a folio.

  The links folder associated with the indesign file is 474 MB.

  The folder that contains all the files associated with the app Indesign is 537 MB.

  Then, how we are exceeding the 1 GB file size?

  Details:

  115 pages in a single article (we converted from the printed version, rather than placing each piece in a section of clean toys. Is this a problem?).

  All the images (about 50) are less than 1 MB png files and videos have been exported to mp4 (total 370 MB of video - have - we need to switch to streaming?)

  Each page contains a link button to the home screen. And at least one, or even two, WHO (for a picture full screen or popup bio of the author.

  3 pieces mp3 audio is not significant in size.

  We have removed the foreign States of the OSM.

  Our PNG files are sized to a maximum width to 2048px.

  The file .indd himself is 58 MB

  Without HTML overlays, but we have 5 or 6 hyperlinks that launch the browser.

  All guess why we are incapable of generating a folio with this article?

  Is it possible to audit our project to see what the problem is?

  We scoured these forums and applied the advice that seemed relevant, so your patience and recommendations would be a great help.

  It is design and incredibly bad practice. Break it up and start from

  zero.

  It's not big a job.

• Tecra Z50 - A - Intel Rapid Storage Technology does not

  Dear Sir

  We bought a lot of laptops Toshiba Tecra Z50 - A with a hybrid HDD (with SSD cache).

  The exact model:
  TECRA Z50 - A
  PT544E-00D01TBT

  We staged and repartition laptops via SCCM.
  However, when you install all the drivers and the Intel Rapid Storage Technology software, I see that only rge WHAT HDD is used and no partition SSD with the Intel RST.

  How we enable this?
  The problem is that the performance is incredibly bad.
  Laptops are very slow, even if the specifications are good:
  CPU i5-4200U
  8 GB RAM
  Windows 7 x 64

  No idea how to turn this Intel RST?
  In the BIOS I find no option for RAID, as must be enabled for the RST to work.

  Thank you

  To be honest I n don't know what you mean exactly the RAID mode. There is no RAID mode.
  The laptop was equipped with a 500 GB SATA HDD HYBRID.

  The part of the HARD drive is used for writing, the SSD part for the reading of the data.
  The performance of SSHD can be placed between a HDD and SSD, but it s significantly slower than an SSD.

  If you have already installed the - Intel Rapid Storage Manager driver, then the service should work

  In the case where it does not run in the background, try to install the latest Intel RST page of Intel driver.

• Downgrade from Vista to XP on Equium L350 - 10L

  Hey guys this is my first post here. I searched everywhere but can't seem to find the information or help that I want.

  Here's the question. I have the * satellite Toshiba L350 - 10L. (PSLB2E) *, I bought last week and I really hate Vista that comes with the machine. I also have XP Pro and I want to put this on the machine instead of use the preinstalled Vista.

  Problem is that I can't find the XP drivers available here to use once I put XP on the computer.

  Anyone know it if they are available and if so where can I get them?

  In addition it is possible to use the drivers vista on XP or if they will not work. I won't try to install XP until I have all the correct drivers. I tried to find this info anywhere and nothing helped. Certainly, demand for XP should toshibe free drivers. I see other people the same questions, but to different machines and I'm wondering are they available for my specific machine.

  In this guys any help would be greatly appreciated, or even advice to if Im barking an incredibly bad tree.

  Once again thanks in advance people

  Hey Buddy

  I was in the same boat with my series of Satellite A. I bought my laptop with Vista pre-installed too, and like most of us, I installed the XP

  The problem was that it had no XP drivers.

  So I ve searched a bit on the European driver Toshiba page and I used the series laptop drivers different

  Still many laptop series uses the same hardware devices and also the drivers would be functions too

  Check just. it worth a try.

  PS: I m ensure that drivers Toshiba of origin should be released in the next time don t lose patience ;)

• Audio fluctuations with Beats Audio on 15p045nd. In the case of any IDT devices.

  Hello

  I got boring fluctuating audio on my new 15p045nd with beats audio. It seems that if there is some kind of current compression. Or its a sort of gizmo "loudness" automatic  Well, what kind of bat 'Optimize' this sucks... I get rid of him? Its incredibly bad.

  I looked in the forum to see if any of the threads audio beats would help me... I have not yet found an answer.

  I read the thread where grand-deku-three presents its solution, but alas, I don't seem to have an IDT... must be because I have different hardware/drivers/controlpanelthingies... anyway...

  Is there a way to uninstall audio beats?

  Can I disable any function for this?

  Thank you!

  Hello support HP Agent.

  No, sorry... did not help. I already said I tried everything.

  I do not have a device such IDT mentioned previously.

  What works however was a conversation with a support agent. We got to the next solution.

  Remove the audio device in the hardware Manager, reboot.

  Control Panel audio always fluctuating, but no more beats.

  Start HP Recovery Manager, go to install the drivers and applications. Select Realtek High Definition Audio Driver and install.

  After this installation and after charging my problem has been fixed.

• Went from T440s to T410 - happier!

  This isn't a question. I just wanted to share my story so that someone could possibly benefit from my experience.

  I am a long time user, a fanboy even Lenovo, uses T-series since when it was IBM. Having to work with a 220 X and a MacBook Air 13 "at home I thought take the plunge and buy the T440s when it was released last year (2013).

  Said and done.

  Already from the go, upon receiving it I could tell that it was not good. The keyboard has been bad, the worst news of trackpad and the screen was bleeding + I thought I could handle a resolution of 1920 x 1080, but I couldn't. Resolution gaffe is mine and not anyone else's fault. There was also (is still) problems with wifi connection - drop every hour approximately. Incredibly bad.

  Also, an intangible, but still, the quality of construction, the sensation if you want, is really off. I just expect more from Lenovo. Also the feeling 'pioneer' to own a computer, which is very scalable and easy to manage if you have a problem like dead or defective pixels keys on your keyboard, is now missing.

  So what I did? Well, I thought to what Lenovo I last enjoyed toally without a "Yes, I like it but..." ", and it's the T410. So I ordered a refurbished 1440 x 900 (Yes, 16:10 rules!) and he got to 1/5th of the price of my T440s and I'm totally in love. That's what a computer must feel.

  So, if you are about to buy a new Lenovo. Think again. Go to a dealer serious refurb and you get a T410. I guess T420 works OK, but I'm not a fan of 16:9. Stay away T430 and T440. I guess if you can stomach the T430 keyboard you have to even less the trackpad WITH the keys. Without them, as is the case on all new useful lenovos of your time, you're really lost.

  I hope this helps someone choosing their system.

  Sincerely,

  Jeremy

  PS. You may ask what I did with the T440s? Keep it docked, use with screen, mouse and keyboard like a desktop computer. Works well.

  I probably try and sell the T440s, although it has value and put it in more T410 "machines" or an actual office.

• I just had the MG5422 and need help. This model is not listed here or anywhere else!

  I did the best I could with the incredibly bad English all install and operate. It connects to my router with no problems. My laptop is connected to my router. After that, there are no instructions. Nor the other sees. Now what? I get only stuck in a loop that says to connect it to the USB cable. IT DOES NOT INCLUDE A USB CABLE! If it is necessary to operate the machine, why it's not listed?

  Hi StormKatt!

  PIXMA MG5422 does not come with a USB cable and I checked, but we have these available to send you or I would do it.  What you need is a USB B cable standard has this implemented via a wireless connection.  If you have a WPS enabled router, then you can use one of them to put in place.  What this means is supported on the the router WPS button.  If you do not have one of them, should be a USB cable.  They are available at your local office supply store.

  Canon took the decision not to include the latter with their printers.  What I will do is pass your message along to my superiors so that they can read them on your dissatisfaction with this.

  They are also available through our sales department.  Our sales department can be reached by calling 800-828-4040.  They are open from Monday to Sunday from 08:00 to 12 a.m. EST (except holidays).  Be sure to choose the option to order accessories to make sure you get to the appropriate Department.

  If you want to that specific instructions on how to put up with WPS and USB, just reply with the operating system installed on your computer.

• RDP-XF300iP dock does not connect

  Someone at - it a fix for the rechargeable dock on the RDP-XF300iP? Both my iPad, iphone, ipod and every family members music source does not charge. The Audio System docking station is plugged into my kitchen counter and has not been moved since I put it there the day it was bought. This pretty much makes this useless device for me since the FM on the radio has incredibly bad static... it it not by a computer, switch light, TV or other electronic device. It is, however, in front of the exit that I tried to plug it into a different plug but still the same response. Not only does the device not load, it captures not Pandora or music on my devices.

  I LOVE or LOVED this system.

  Please read and answer.

  Deborah

  Hello Deborah,.

  Welcome to the community of Sony.

  Make sure the iPod/iPhone/iPad is firmly connected.
  Make sure that the AC adapter is plugged firmly.
  Make sure the iPod/iPhone/iPad is compatible with this unit.

  Ensure that the iPod/iPhone/iPad is updated with the latest version of the system software.
  Extend the antenna on its length and guide to get the best reception.

  Follow the steps mentioned on the link below to fix the problem with static noise from the docking station.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/34979

  If the problem persists, the Docking Station will require repairs.

  You can run the query service from the link below.

  https://eService.Sony.com

  If my post answered your question, please mark it as an "accepted Solution".

• Can anyone suggest a better way to update?

  I've updated a windows 7 32-bit (service pack 1) PC to a new installation.

  I am now on day 3 and still updates are still slow, halt, difficult and not much. I lost at least 8 hours trying several "FixIt" and the windows troubleshooting update just to make things worse, so I had to restore the system and start from scratch.

  There must be a better way to update Windows Update use surely? I can't afford to wait for 3 + days to install an operating system to actually be able to use it safely online.

  Absolutely, it boggles the mind as to how incredibly bad is the whole process.

  The installation process described came from this thread,

  They must be also, and

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Lose the Microsoft optical mouse settings

  Whenever I have reset my computer my mouse wheel to reset to 15 lines/click. I can't imagine that so many users want so high that it become the default, but what I can do to get the system of remember I want the value 1?

  It's a Microsoft Optical mouse.  In addition, a person will have to tell me how to learn more on this subject.  (Yes, I'm clicking on apply and exit properly...)

  I swapped the Microsoft mouse for some orphan one from the bottom of a pile of parts.
  It works very well.

  I am also very happy to get rid of the incredibly bad design from a mouse that has button fronts that record a click when it comes in contact with a corner of the keyboard.