InDesign CC will not open - stuck on "Please wait a moment" Adobe Application Manager.

Similar Questions

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• updated my photoshop in 2015 and now it will not open at all ~ please help!

  I've updated my photoshop - and I also tried to uninstall and reinstall the program, but nothing works! The program will not just open!

  Help!

  Try to manually install Camera Raw. This is 9.2 for 2015 CC: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

  The most recent for CS6 is 9.1.1: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1

• My copy of Adobe InDesign cs4 will not open a regular idml file.

  I opened my document, and said it was "impossible to open the file"Tightsketch_charrette2.idml". "Adobe InDesign may not supported file format, a plug-in that supports the file format's may be missing, or the file can be opened in another application" I tried to open the other idmls that I knew were not corrupt and I received the same message. I checked the plugins, they are all turned on.  I quit all other programs, no luck.  I rebooted the macbook, no luck once again.  I could receive assistance?  My Indesign cs4 is fully updated and Im having all these problems.

  I have good news and bad news.

  The good news is that the file opens correctly here in CS5.5 and CS4. The bad news is that this means that there is a problem with your CS4.

  I would start by trashing preferences. It's quick, easy to make and not too destructive, and if you're lucky, it will be able to solve the problem, but I would not put the chances of success more than 50-50. See replace your preferences

  You have a Time Machine backup? If you do, the next thing I'd like to try restoring the application folder InDesign from a time before the problem started.

  If all else fails, it's probably time to bite the bullet and get out of the installer. First try to run an installation to 'fix' on top of what's there. If this, too, goes down, then I would like to uninstall CS4, run the CS5 own tool (which can also clean up to CS4 - see resolve installation problems with the cleanup of CS5 tool), and then restart the computer and reinstall. If you have any custom stuff you must make copies of things like shortcut games and workspaces that you can replace as explained in the thread about resetting the prefs.

• Hi, I asked this question beforebut could not copy the answer. I can't attach documents desk top to my emails it will not open them ideas please.

  Cannot open attachments to emails from the desk top

  Hi westland.

  The first thing I would do is make sure that all of your plugins are up-to-date:

  https://www.Mozilla.org/en-us/pluginCheck/

  Many e-mail providers use a flash interface to attach documents. If this does not work, you can try from Firefox Firefox to solve the issues in Safe Mode. There could be a plugin/add-on which interferes. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

  You can also try to create a new profile.

  Hope this helps!

• I'm not able to download Illustrator. I get Adobe Application Manager quit unexpectedly.

  I just very monthly Illustrator and now I am not able to download. I have closed and restarted my computer. I use an iMac, and operating systems, etc are up to date. Appreciate it really certain direction.

  Thank you!

  You can download directly if using another browser also fails.

  If you follow the 7 steps you can directly download a free trial here: http://prodesigntools.com/adobe-cc-direct-download-links.html

  and activate it with your serial number.

  If you have a problem downloading, you follow the 7 steps, or your browser does not accept cookies.

  the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  Unable to obtain the cookie translates into an error page displayed after clicking on a link on prodesigntools.com

• try to download photoshop and adobe application manager opens and then closes

  I am trying to download photoshop CC that I just bought and when I click on the download button, the icon of adobe application manager opens and then quickly closed saying the adobe application manager quit unexpectedly you want to reopen. I click on reopen and it closes. Any help would be appreciated, thanks!

  uninstall your application, cc, clean and reinstall by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Firefox does not. Have done all troubleshooting but still does not. It will not open again now. Help please.

  After all the troubleshooting suggestions and also uninstall and reinstall Firefox, it won't always work. First it fades and a "does not" review appeared on the letterhead, with the pointer regarding the timer but nothing did. He was recently working fine for ages and I have not added anything, or deleted, so does not understand why he should stop suddenly work.
  I followed all the troubleshooting tips and disabled the plug ins, also removed a lot of the add - ons, did not always work. Then I uninstalled and re-installed.
  Now, it will still not open. A window pops up saying: he's fallen down and giving me the opportunity to re - start or leave. If I click on start, it only re - start.
  I even started it in SafeMode but which will not open either, it opens for about a minute then just closes.
  Please help, I really want to use any other search engine.

  If you have submitted reports of incidents, so thanks for posting the ID of one or more reports of recent incidents that have a prefix 'bp ':

  • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

  You can find the ID of the status of recent reports of error on the page "help > troubleshooting information" (topic: support).

  • Click on the "All incident reports" button on this page to open the Subject: hangs page and see all incident reports.

  If necessary, you can open on: pages through the address bar.

  See:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter
  • https://support.Mozilla.org/KB/Mozilla+Crash+Reporter

  If you cannot open Firefox, see:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
  • http://KB.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
  • https://developer.Mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

• My Instagram app will not open it keeps saying: "pending". I have tried to delete the app, off my phone and still nothing! Please help thanks

  My Instagram app will not open it keeps saying: "pending". I have tried to delete the app, off my phone and still nothing! Please help thanks

  You said that you tried to delete the app

  If you have not been able to

  Settings - general - storage - Storage - find the app - delete

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  Then re download the app

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Help, please! Captivate 9 Properties window will not open! WTF?

  I rebooted app, restarted my computer, re-installed Captivate, tried on new documents and still the Properties window will not open!

  I click on the Properties tab - it opens and closes immediately. Sometimes, opens and closes several times. How can I use this software with a bug like that?

  Does anyone else have this problem? I have a deadline for the future. I need this job as soon as possible.

  Any help would be appreciated

  Thank you

  You can go for Expert UI, much more control on the panels: check the option «Enable custom workspaces...» "in preferences, General settings.

  Preferences can be reset using the CleanPreferences file in the folder utils under the CP installation folder.

• CC 2014 Illustrator will not open, gets stuck on the loading page

  My CC 2014 trial Illustrator will not open.

  He gets stck on the next page to load...

  

  I restarted my computer, out of the creative cloud, done all the updates, but still no progress.

  Suggestions for re - starting my illustrator would be more than welcome!

  Thank you

  Problem solved by session connect. Thanks a lot WENDY for the logon session. I appreciate really.

  The reason was "Duplicate fonts" that have been installed on the machine and fix policies duplicated using the application book fonts from MAC OS solved the problem.

  Kind regards

  Rambour

• The CD/DVD tray on my eMachinesT3616 will not open.

  The CD/DVD tray on my eMachines T3616 will not open.  Solution?

  Hello

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Will not open Google searches

  When I put in a search and then click on a link, the link will not open just a blank page is displayed.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• file extensions will not open

  Some extensions of file, like .ged, will not open on my computer.  Is there a way to fix this?

  Elevlyn,

  Thanks to fully explain the situation. Now, I suggest you try it. reader of GOL.

  (1) make a backup of your file on-line.

  (2) download the reader and run an anti-virus program before running the Setup.

  (3) drive test

  (4) Please report the progress. Which drive OK?