Indicator of red bar in Windows Vista

Similar Questions

• How to print a calendar and task bar on Windows Vista

  My calendar prints well but cannot print my task

  Hi Fishxpress,

  You try to print the bar of tasks or tasks on Windows Calendar?

  If you try to print a task in Windows Calendar, then you can choose the option to print style for the day which will display the tasks of the day and check if that helps.

  For more information, you can consult the following article:

  Customize Windows Calendar

  Hope this information is useful.

• Get Windows Vista themes back please READ

  One night, after that I closed my laptop that I forgot to do something on the laptop and when I log in the computer froze several times. After that the Office had the appearance of task bars passed Windows Vista default to Windows Classic. Because it was late, I decided to put it off until the next day. When I opened the next day I was unable to access the control panel and the Customize option when you right-click the screen. When I restarted the computer, I was able to access both, but it took way to long than expected. When I opened the tab customize or properties and go to the themes tab, I was unable to find the default theme of Windows Vista. So now I'm stuck with some ugly theme. I scanned my computer COMPLETELY , used Disk Defragmenter and restarted the computer and nothing is the fix. The same problem of window will also the Internet. After all it the default theme has been well, deleted. Any chance to resume?

  Hello redfalcon67,

  To resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem, then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  To determine which files can be repaired by the System File Checker tool, follow these steps:

  1. Open an elevated command prompt.
  2. Type the following command and press ENTER:
     findstr/c: "[SR] cannot repair the military file" %windir%\logs\cbs\cbs.log > sfcdetails.txt

     Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  3. Type the following command and press ENTER:
     Edit sfcdetails.txt

     The Sfcdetails.txt file uses the following format:

     The date/time SFC detail

  
  The following example of log file contains an entry for a file that could not be repaired:

  2007-01-12 12:10:42, info CSI 00000008 [SR] cannot repair the military record [l:34 {17}] "Accessibility.dll" of accessibility, Version 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_MSIL = (8), VersionScope neutral, neutral culture, PublicKeyToken = {l:8 b:b03f5f7f11d50a3a}, type neutral, TypeName neutral, neutral public key in the store, file is missing "

  
  If the System File Checker tool cannot repair a file, follow these steps:

  1. At a command prompt, type the following command and press ENTER:
     takeown /f Path_And_File_Name

     For example, type takeown /f E:\windows\system32\jscript.dll.

  2. Type the following command and press ENTER to grant administrators full access to the file:
     ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

     For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. Type the following command to replace the file with a known good copy of the file:
     Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

     For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  
  Hope this helps you. Let us know anyway. Make it a great day!
  

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• I am unable to have Firefox remember passwords. The 'KEY' icon which is supposed to be on the left side of the address bar is not there. Windows Vista Ultimate Edition, Firefox Version 9.0.1

  I need to have Firefox remember passwords. When I go to 'HELP' to get the instructions to do this, I am told to click on the 'KEY' icon on the left side of the address bar. But there is no icon.
  Windows Vista Ultimate Edition, Firefox Version 9.0.1
  I could use some help, thanks.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

  See also:

  • http://KB.mozillazine.org/User_name_and_password_not_remembered

• does not start the last bars of microsoft, PAGE_FAULT_IN_NONPAGED_AREA windows vista system

  Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:

  -bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)

  -tried to restart, all options on F8 does not.

  -No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)

  -recovery disk proven system of point of sale without success.

  -every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.

  -System is an ACER EX4630-4126

  -BSOD popped up all while surfing internet

  -is the new software installed spybot s & d

  -can not run memtest because it does not start up vista

  -tried running the memory diagnostic tool but it shut down on me before completing the diagnosis

  Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.

  Ainjel Hello,

  This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.

  You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:

  Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".

  http://support.Microsoft.com/kb/939720

  Do a restore from WinRE system:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards

  Savan Microsoft technical support.

• Why is the Windows Vista Service Pack 2 Installation Progress Bar stuck?

  I downloaded the Service Pack 2 of Windows Vista, so I could install an application on my computer. Is not compatible Windows Vista Service Pack 1. I've been sitting in front of my computer for a while and the green bar progress is stuck at it seems to be 100% or 99%. I was going to complete the process, but I don't want to damage my PC.

  Too bad guys! I had Windows Update running in the background and my computer is automatically restarted on 5 Minutes after!

  Tips:

  Make sure to close all programs and applications that might interfere with the Installation of the Service Pack.

• During an update to Windows Vista, my office has disappeared with the task bar and start menu.

  I can only access my and other programs through the Task Manager.  I have tried troubleshooting, I restore my computer on the eve of what has happened, but nothing helps.  Any ideas?

  Hi cthodges

  Thank you for using the Microsoft Answers Forums!

  I would like to ask you a few questions to help focus in the right direction:

  Are there other specific details that you can provide that will help us understand and solve your problem?

  We can try a few steps and check if it works:

  Run explorer.exe from the Task Manager > new > task. If the start menu reappears, it would confirm the cause.

  We can now perform the following steps:

  Step 1:

  Run an on-line analysis of your PC of malicious software:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  You can also run Anti-Malware on your computer. Follow the steps in this link:

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Step 2:

  To use a boot option, follow these steps:

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  c. when the boot menu appears again, and the words "Safe Mode" appear in the bottom, select the installation that you want to start and then press ENTER.

  If it works fine in safe mode, infer you that all third-party programs are causing the problem.

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  S tep 3 :

  The SFC utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a sfc on the windows vista computer scan. To run a scan suite sfc as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt type sfc/scannow , and then press ENTER.

  See this link for more information:

  http://support.Microsoft.com/kb/936212

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Repair of window Vista - problem starting - stuck scrolling bar load

  Hello

  Looking for assistance here, if anyone can help, I have a laptop LG R410, age two months running windows vista basic 32-bit.

  Laptop used to start and rest the scroll bar loading.  Tried through 'F8' menu to start in "Safe Mode", but wont even boot into Safe Mode, is the last driver loaded:

  Windows system32 drivers crcdisk.sys

  Also, tried "last good configuration" but nothing is.

  Try to repair windows with the repair disk. but no joy once again, by looking at the details of the diagnosis and repair, it shows repair stalled when the event log diagnostic testing.  It will not accomplish this test, even after leaving during the night.

  Also tried to go back to a restore point, but because it is new, it doesn't show any restore points that were to restore the system back.

  No backup available or go to restore.

  Memory Diagnostic test has been successful.

  Ran sfc/scannow to command prompt, is back with "start scanning system.  This process will take time. "A few seconds later says"Windows Resource Protection could not perform the requested operation. »

  A ran Chkdsk C: /f so none of the bad sectors on the hard disk.  Summary says "Windows has checked the file system and found no problem."  But return the following message at the end summary "cannot transfer messages saved in the journal of the events with the 50 State."

  Any help to help solve my problem would be appreciated gratefully.

  Thank you.

  Hi Ashish,

  Thanks for responding.

  Problem solved, or not!  Hard drive is damaged.  As a result of tests with checkdisk and knowing that he is not really do a thorough job.  I checked the hard drive once more with 'SeaTools' of Seagate.

  The hard drive is riddled with bad sectors.  Filed in support of Service today and they confirmed the hard drive is faulty and they will replace it under warranty.

  Thank you for taking the time to answer my question in the first place.

  All the best to you and the team at Microsoft.

  Kind regards

  Scott Connoilly

• After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista

  After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar

  Hello

  Method 1:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: Run SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run system restore by keeping the computer in the boot.
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• Windows Vista: windows could not start error. is suspended from the "Microsoft Corporation" loading bar then black screen BIOS not acpi compliant

  After you have installed the driver for the zune hd, I was asked to restart my computer. After the reboot, start froze on a white screen. I've seen this before and it is usually because of some connected usb components. so I manually powered down the Tower, disconnected the cable from zune and restarted. This time a screen saying that windows could not start, "launch Startup Repair tool" was recommended. Select this habit makes the startup hang to the progress bar from Microsoft corporation, then to a completely white screen. Although strangely, once only a blue error screen appears which says that the BIOS is not acpi compatible. I can't restart with F8 to go into safe mode, "windows error recovery" still appears. "Start windows normally"produces the same results as the tool to restart launch system. " I have a drive to upgrade to windows 7 and a windows XP upgrade disk. the disc of windows 7 hangs at "starting windows" and the XP disc gives a blue screen error: stop: 0x0000007B (0xF78D2524, 0c 0000034, 0 x 00000000, 0 x 00000000)

  I think I have a BIOS problem, but I don't know how I could continue dealing with the repair. I have no success update the bios from usb flash. Any idea is appreciated.
  Update: managed to start with F8, choose to boot in safe mode and loading hangs after "load: \windows\system32\drivers\crcdisk.sys"***.
  the machine is a gateway LX6810-01 (friend motherboard)

  Hello

  1. What is the exact error message when Windows Vista does not start?

  2. you have the disk Installation of Windows Vista operating system?

  I suggest you change the mode of RAMA to IDE in the BIOS. You can contact the PC manufacturer for assistance.

  Note: BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  In addition, perform a check disk in Windows Recovery Mode.

  (a) Insert the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD".

  (c) select a language, an hour and the currencyand a keyboard or an input method, and then click Next.

  (d) click on check drive for errors.

  (e) in the System Recovery Options dialog box, select the drive of your Windows installation and click Next

  (f) to the System Recovery Options dialog box, click on check Drive for errors.

  (g) use the switch/r to run the disk check.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  It will be useful.

• Windows Vista - Bluescreen with text appears after the startup loading bar

  Help! I'm running on Windows Vista.

  I know not ALL the technical features, and I'm really in a hurry to solve this problem, so I'm sorry for the low amount of detail.

  Well, anyway, I pressed the power to force the button stop and now my computer won't start. I should not have forced, but I was rushing to turn it off.

  It starts as normal watch the bar loading for a few seconds, the bar hangs for about a second and then it goes to the blue screen of DEATH. Sound blue screen, with text saying "a problem has been detected and windows has shut down to prevent damage to your computer", etc etc.

  Then, at the bottom, it says:

  ---------------

  Technical information:

  STOP: 0 X 00000024 (0 X 00190444, 0X85B93530, 0XC0000102, 0X00000000)

  ----------------

  The only thing I know about this info which is sound in hexa.

  Other than that, I'm naïve.

  Please help me fast, guys!

  Thank you

  Michael A. (lolwhet)

  Hi Michael has,

  Did you the latest changes on the system?

  Blue screen errors may be caused by the hardware and software issues, and it can be difficult to solve the problem sometimes. Check to see if the following is useful.

  Method 1: If you have installed other programs, check if the problem occurs in safe mode. To do this, follow these steps.

  Startup options (including safe mode)

  Start your computer in safe mode

  Method 2:

  If you do not experience the problem in safe mode with any problem, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• Windows Vista. Icons and bar do not list jobs

  So yes... Let me explain my problem here.

  Yesterday, I created one guest and offline account to another, after that, my screen

  became black and unresponsive to everything I pressed. Even after the reboot of my

  computer, the problem persists.

  Now, I had turned off the guest account, through safe mode.

  But in normal mode, icons, task bars have disappeared, but the background and mouse cursors

  remains. I was wondering if this could have something related to the chart or something.

  In addition, I am not able to go to the Task Manager, it goes black screen after I've done crt + alt + delete.

  I use windows vista x64bit

  Please guys, I need help);

  Hi XYC4,

  • You have security software installed on the computer?

  Method 1

  First check to see if the problem persists using the last known good configuration.

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2

  If you still encounter question then start in safe mode then run demarrer start clean, check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If the previous step fails, then analyze and remove any malware or computer virus infections and check if that helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  You can also use Microsoft Security databases to scan your computer

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Update of Windows Vista has changed format of tools/start bars.

  Updated Windows Vista installed today (Apr 28, 11). After restarting, the tools/start bar bar returned to the old gray Windows (classic?) format. I tried everything but can't retrieve the standard Vista graphics/format. The customization tool said that it is set to the Standard Format.  Antone have a response to that?  Thank you.

  Hi JohnMash,

  I suggest you follow the links provided and check if it helps.

  Why are some Visual elements will automatically turn off?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Solve problems with Windows Aero

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• Windows Vista: I had a bar where I could put programs and other things, it disappeared yesterday

  Windows Vista: yesterday my computer up to date and this bar I have where I could put programs and stuff diapeared. I have no idea where or what it is... pls help. I love him and miss me...

  What is the dock of Dll?

  Go to your Start Menu, all programs. Find the folder "Dell". Open it and click on your Dell Dock.