Infinite Boot loop - no CD/USB

Similar Questions

• Nc6400 entered the restoration infinite boot loop

  Hello

  a friend gave me a NC6400 to format and install w7 Ultimate SP1 x 64.

  I know that this model does not support W7 (not), but I managed to find a solution to this.

  The problem is that after the installation of any windows update, he's going directly loop start of restoration and it will not solve the problem.

  Safe mode doesn't work at all (same thing)

  I already reinstalled w7 like 5 times. All is well until I install the updates.

  Even if I only install the language pack to win put to day and nothing more that it will be the same result.

  On first installation, I noticed that the problem was the registry.

  On my last attempt the fundamental problem was the driver of 3d drive guard. That been said, I can't connect to uninstall so I can fix it.

  I checked for defects of material and everything seems ok.

  Before the last accepts it matches the installation I used Disk Sanitizer from the BIOS in order to have a HARD drive completely clean.

  Any suggestions will be appreciated!

  Best regards

  Miltos has.

  Hello:

  I think the problem is with W7 Ultimate only.

  And Yes, the nc6400 will work 100% using combinations of drivers from the support pages and pilot nc6400 and 6910p (there's some W7 drivers and software on the 6910p page that work the nc6400).

  See this related post... it's for desktop PCs, but the problem is probably the same...

  My W7 Ultimate dc7800 having done the same thing as yours... Infinite boot loop.

  http://h30499.www3.HP.com/T5/business-PCs-Compaq-Elite-Pro/DC5800-Win7-x64-and-problem-with-restart/m-p/6173175#M95369

  My solution was easier... I installed W7 Pro and had no problem later.

  I can tell you that W7 Pro x 64 works 100% fine on a nc6400 because I had one and this OS is installed.

• Rebuilt again drive with the original image, goes into infinite boot loop

  Hello

  I'm going crazy!
  I have a laptop (abook), with a new disk in it, because the former was getting bad sectors. I managed to save the data, including the RECOVERY partition. Now, I'm trying to rebuild the image of the factory of this partition on the drive to get a clean computer.
  To do this, I try to use imagex.
  However, whenever I install the image on an own C: drive, I get infinite loops of starting, with repair system errror messages varies, but is noosloader. Startup Repair or BCDedits does not work.
  To make things worse, I ordered the laptop with Windows 7 64 bit edition Home premium ed, but the original image contains Vista Home premium.
  What should be my plan of action? I tried to reformat and install the image several times and am hard to run out of ideas.

  the recovery partition to reinstall vista operating system failure, not a disk failure lasts

  a disk failure hard it is why the computer manufacturer would recommend to make recovery disks

  I told you what to do

  If you are not satisfied with my advice:

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• Satellite L50 - A - 1 6: "boot loop" at power on

  Hello world.

  I have a Satellite L50 - A - 1 6 (just bought). I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward).
  After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop here is summerized: + logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC. +

  The only possible operations are:
  -to power the laptop off (by turn off by pressing the key)
  -to access Bios (by pressing the F2 key)
  but later, the laptop comes back still in boot loop.

  I also tried to set up an order of boot device for the use of tools like "live recovery cd" or similar (also USB)... but nothing... He always goes in the city "boot loop".

  Any suggestion to have the correct start of my laptop?

  Thanks in advance.

  Hello

  >. I changed the HARD drive partitions in order to better utilize the space. Then I tried to create the recovery from the preinstalled recovery partition disk (However this was not changed!), but it did not work. It was posted this message: "the recovery partition was not found.

  This does not surprise me. You have changed the partition table, and therefore the partitions of HARD drive will be more found.

  > So I tried to restore factory settings (as explained in the guide, press '0' at the beginning upward). After that, my laptop computer goes into "boot loop", and it continues to go in the boot loop every time I turn it on. The boot loop is summerized here: logo (leading to innovation) toshiba-> error message (.. .has been detected a problem... etc etc)-> black screen-> logo toshiba (leading to innovation)-> ecc. ECC.

  This does not work for the reason that I mentioned above. The disk HARD recovery isn't possible now!

  I recommend you to use stop force switch:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

• Iconia A1-810 taken in Boot Loop in any case to get it out?

  OK I admit it in a previous post, I was looking at getting the root privledges on my A1-810, I asked how to go in the Devolopers Options.

  Although I had put up to open the Options Devolopers and activation of Usb Debugging Options as well.

  But before I had the chance to do another thing my wife needed me to do something for her, so I stop my Tablet thinking I would come in a little bit and pick up where I left off.

  Evil

  When I started the shelf upward, he went through the usual boot process, but when he got to his home screen, stop immediately, started again and stop again.

  I went through this during about half an hour until I found a post on the forums that said.

  DO a Hard ReSet and will arrange the problem cause something got the Boot Mbr obstructed upward, and while I would lose everything on the shelf she set it to plug the factory and repair Boot Mbr.

  Well I preformed Hard ReSet.

  But it does not solve the boot loop in what it is.

  While he did reset it on specifications of the factory, I could tell that he began to return to the Welcome screen that guides you through the Setup program for the first time.

  You guessed it, he got to the home screen about 3 seconds later it restarted, and restarted.

  It went like that for well over an hour until I stopped him, with that alone be able to do using the reset button.

  A few times as it has been rebooted it came Android OS is upgraded software.

  Short saying I'm "VERY MAD".

  I can't quite understand what has happened.

  I never did anything, but go in the Devolopers Options.

  Short of sending new in Acer to be looked at.

  ANY IDEAS?    Anyway thanks for all the ideas in advance: Ricky

  If the unit is still under warranty, I suggest strongly back the seller as soon as possible, and it will become a problem Acer. You did nothing wrong, there is a software failure, and we all know that Android 4.1 and 4.2 are more than obsolete, so there is probably nothing you can do.

  I'm also stuck with serious problems in my Iconia B1 with 4.1.2 Android and there not there an even a chance that Acer will provide updates anytime soon, at least not in this life.

• Boot Loop iPhone 5 c problem

  So that's how iphone got a uppdate iTunes, but after she got into a boot loop.

  The phone can be switched on using the on/off switch, but it can be disabled by using only the power on + combo home buton!

  Powers on but right phone at the apple logo, it stay there for 3 seconds then the apple logo fades to grey (like an LCD) broken then there restarts... and that on and so on... until the battery is empty.

  The phone goes into DFU mode, itunes acknowledged, but after itunes launch the iphone in dfu mode, itunes says "waiting for iphone", the phone restarts, but instead to continue the restore procedure, it penetrates into the same loop and after 10 minutes, itunes gives error.

  The phone is out of warranty, and I want to record just because it seems perfect, no sign of use!

  Oh and another thing, I tried to put another apple original battery (I hade a new brand in hand 6!) did not work...

  So guys I came to you for your review. Be free to say what you think that will fix this poor iphone!

  I was about to say to make an appointment at the genius bar. They would try to restore it for you free of charge...

  Then I saw your mention of trying to put a new battery in there... If you have physically opened the phone upwards, it is technically unbearable and completely untouchable by Apple. I couldn't hurt to consider anyway and see if they can get it to restore, but you can kiss all hopes for a farewell to replace security exit.

• iMac 27 stuck boot loop

  my 27-in. Imac is stuck in a boot loop.  It goes to the start screen, I see the Apple logo and progress bar, then the screen has a line go overboard and it restarts. Attached picture to show you the screen, any help would be great. Thank you!

  Try to start in safe mode, try safe mode if your Mac does not commissioning - Apple Support

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• 3490CT: is is possible to boot from the CD USB drive?

  While I read in this forum that it is not possible to start a ct 3049 since an external USB CD drive, I read elsewhere on the web (I can find is no longer the link) it is possible to boot from a USB CD drive as long as it's an Iomega brand player.

  Can anyone confirm on deny for me please?

  Hello

  You can boot from the external USB CD drive, but you need a supported drive.
  Please also check this topic on the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=944&MessageID=2086#2086

  Good bye

• Portege 3480: is it impossible to boot from a key-USB-cd?

  I would like to install win 2000 on my portege 3480. However, I have a lot of difficulty getting to boot from external cd readers. I tried with a Cd Player and a LiteOn DVD drive iomega. None of them works. The two drives are connected via the USB port. I read somewhere that we can start using pcmcia on the 3480 cd players - can that really be true?

  Hope someone can help out me.

  Thank you

  Steffen - Denmark

  Yes, it's true
  Generally it is not possible to boot from the external USB CD/DVD drive.
  You need a compatible PCMCIA reader and supported.

  Please check other messages of the forum in this category:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18540
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18417

• SA30-414 boot from the floppy USB drive

  Hi all!

  I'm tryin to get my my satellite A30-414 to boot from the floppy USB drive and enter the dos mode, but all I get is a black screen (without a slider, of course!), and then the windows XP login page directly. Can you tell me if this model has a boot device menu shortcut keyboard?

  Also, I may be permanently changed some configurations of starting (to know by pressing F12 at startup, then press F2 to try later) with my attempts to get the machine to boot from the floppy drive: now even when the floppy drive is not connected, I get this black screen awkward and then, after a few seconds, the logon windows page. How do I access the Setup menu and check?

  Thank you in advance for your help!

  Hello

  You can access the start menu by pressing the F2 key during the boot process. This will take you in the "setup" menu where you can change the order of selection of boot device as well as the other BIOS settings permanently.

  Kind regards

• IX2 - DL does not start after the firmware update and now in boot loop contant with double red lights

  I just applied the update to the latest firmware 4.1.208.33789 for my IX2 - DL and it took an extremely long time to reboot - flashing white light for 20 min on the right.

  Shooting and by unplugging power did the same result.

  I hold the reset button hardware pin and now he's in a boot loop throw up double red lights and then attempt to restart with flashing blue white and strong.

  Help! don't know what to do next.

  Hello steveappcity,

  I recommend a support incident, opening the only way I can support an imager is if she is officially released:
  https://Lenovo-na-en.custhelp.com/app/ask/

• Re: Satellite L650/07C-boot-loop after memory upgrade

  I have a Toshiba Satellite L650 / 07C - PSK1JA-07C017.
  To get a little more life out of it, I've updated yesterday with a SSD and 8 GB memory.

  The SSDS works perfectly and I have installed OS and all the drivers and software.
  However, the memory causes a boot loops. I returned to the standard 2 x 2 GB memory at the moment.

  With the new memory installed, the computer startup-loops. When you try to start Windows, the computer will appear at the stage of loading Windows (the boot animation) and then restarts.
  I tried to start with the recovery discs, and it arrives at the stage of loading of Windows Setup, and then restarts.
  She will continue trying to start, then by restarting (then repeat), until I turn it off.

  The memory I installed is Corsair CMSO8GX3M2A1333C9 (2 x 4 GB):
  http://www.Corsair.com/cmso8gx3m2a1333c9.html

  For me, it looks like the same specifications that the modules of memory Kingston 4 GB listed on the Toshiba site as being compatible with my laptop:
  http://www.MyToshiba.com.au/products/Accessories/memory/KTT-S3B/4G/accessories

  I found the specs of memory recommended here:
  http://www.LASystems.be/PDF/Kingston/246787/KTT-S3B4G.PDF

  If I go into the BIOS, I see that the memory is detected as 8192KB. The Toshiba site says that this laptop is expandable to 8 GB.

  Is there something I'm missing?
  Is there another step I need to perform when upgrading their memory?
  I don't know why it won't boot with the new memory modules in that I put.

  Thanks for any help you can offer.

  I assume you have the Australian model is not easy to find info on the hardware upgrade. What I can say is that model European uses DDR3 1066 MHz memory modules and 4 GB of RAM compatible a part PA3677U-1M4G number.

  It must be exact model described by microcens.
  I recommend you use the tested and compatible memory modules.

• Satellite L300D has decided to go a sort of boot loop

  My laptop decided to go sort of boot loop where it load and displays Toshiba screen, you can press F2 (for BIOS) or F12 (for the boot sequence) then shows a screen saying "Windows is loading files...". "with a progress bar and once who reached 100%, it restarts. Its kind of like the operating system does not recognize the HD. You can not press F8 to boot into safe mode or anything.

  Its a L300D Satellite from Toshiba with Vista

  I replaced the hard drive about a year on the computer and reinstalled vista OS with recovery disks and its been working very well. Ive tried reinstalling several times, ive also tried another hard drive and the same results with it also. I took the disc out and put it in a cage of external hard drive and can see everything ok. So I don't think it's a problem with the disk that initially, I thought it was.

  Ive also tried to format the drive (via the external hard drive cage) and resettlement, repair of vista, which dates back to the last know good configuration etc, but I just get the same results. I also downloaded and tried all the options with recovery of neosmart disk. And I can browse the hard drive at the command prompt ok, which lead me to think of the boot partition has been corrupted somehow. I thought the full format would be cured it but no luck. It comes down to the boot loop.

  So I'm running out of things to try.
  Any suggestions would be appreciated.

  Hey Buddy,

  Which disk you used exactly?
  Have you tested the Toshiba Recovery disk?

  If Yes, and the same problem exist, it appears to be a malfunction of the equipment. So, I would contact an authorized assistance service provider.

• Cannot boot from disc or USB on Ideapad Z710

  I try to install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can not even my laptop to boot from an external support. InsydeH20 Setup utility, I have so far disabled Secure Boot, set the boot in UEFI, compatible USB Boot, Mode a PXE on LAN boot enabled and set my EFI boot to the EFI network order) 1 0 for IPv4, network EFI 2) 0 for IPv6, then (3) no other options) Windows Boot Manager. I'm not actually trying to boot from a network, I want to just start from the built-in DVD player or my DVD USB drive. When I boot with these settings, I get the error: network EFI 0 for IPv4 (...) initialization failed, and a similar one for IPv6, then it starts with Windows. Why I can't boot from DVD or USB?

  Another thing I tried is affecting Boot Legacy Support and Boot Priority to first legacy Mode (with Secure Boot disabled) which translates my computer laptop startup in directly to Windows even when ODD USB appears first in the boot order.

  Please tell me how to start on a Linux DVD or a USB on this machine! It's a major purchase for me, and if I can't install Linux on it, this laptop is completely useless for me. Please answer.

  Try this:

  1. fix the disabled startup.

  2. set start on Legacy Support Mode.

  3. start first priority inheritance

  4 Save and exit.

  5. stop computer.

  6. Insert your usb pendrive.

  7. press on Novo.

  8. Select the Boot menu

  9 select your USB key, and then press ENTER.

  Note: USB Boot must be enabled.