Ink cartridge HP Deskjet 3915 color does go to the left of the black ink?

Similar Questions

• HP deskjet D1520: incorectly color printing after changing the black ink

  I replaced my color ink the printer was working fine, then the necessary black replaced so I replaced that and now print colors turned off. I did a test on my computer. The upper part is the color on the screen, the bottom is the printed color. Help, please! I removed my devices, Cup of the printer and reconnected, then reinstalled and it still printed in this way.

  

  Hi @sadie731,

  Welcome to the HP Support forum.

  I understand that you have a HP Deskjet D1520 printer that prints wrong colors when sending your computer Windows 8 print jobs. I would like to help with that.

  Page 87 of the HP Deskjet D1500 Series user manual, providing the steps which can solve the problems of print like that quality.

  If it's a matter of print quality caused by the software and printer drivers. It would be better to completely uninstall the software and printer drivers. Here is a video that you can use to reference - uninstalling in Windows 8 HP printer drivers, if needed.

  Once uninstalled, you must reinstall the software and drivers. Here is a link to the page where you can start downloading - drivers and software HP Deskjet full functionality.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• DeskJet 3050 can operate with only the black cartridge?

  I wonder if the printer can operate with only black ink? The manual says that the printer can operate in single-cartridge. My previous color and black ink run out. So I installed a new black cartridge. However, the warning light is still on indicating there is no ink, and he says "door open". Thank you.

  Hi Alice, yes you can use the single cartridge

  Use single-cartridge
  Use single-cartridge use the HP all-in-one with only one cartridge.
  Mode single-cartridge begins when an ink cartridge is removed from the print
  transport of the cartridge. In the mode single-cartridge, the product can only print jobs to the
  computer.
  NOTE: When the HP all-in-one device operating in mode single-cartridge, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

  Have you tried to reset the printer to get rid of the open door msg? See the link below for more details

  http://support.HP.com/us-en/document/c00829896

  Ciara

• Fill color does not have the correct form

  Color is not in the form... I did a color pencil pentool. And the forms filled with color, but it does not seem to have filled the entire shape. As the outline of my tracking does not match the form that Illustrator is filling up. The shape and colour are a bit off.

  Here is exactly what I mean:

  

  Is this version CC 2015? You have successfully updated to 19.1?

  Also: is "Snap to grid of pixels" active in conjunction with effects or "shot of Align for inside and outside?

• HP Officejet 7110e: HP 7110 does not obey the "Black only" Print option. : - result person wouldn't want to buy HP PRINTER.

  HP must discover new such as printer driver software to solve the only black option (6600/6700/7110) means black alone will consume, otherwise no one will buy HP printer. I already suffer from level of ink color cartridge 'only Black' option... feel good too dissapointe. HP hopes will solve as soon as possible to maintain their high position in printer marketing even when... Thank you.

  HPARUN wrote:

  I understand the technical problem on the print head to clog the question, but why not run like 1180c or hp hp 1000 as printer that handles both inks or ink only (black)?

  Deskjet printers 1180c or 1000 have printers IPH - the print head is built into the cartridges.  If the print head is clogged, the replacement of the cartridge will also replace the print head.

  The Officejet 7110 printer has IIC, individual with piping ink cartridges and print heads separated to connect.  The printer running with one or more colors of voids can cause the air in the plumbing and/or damage to the print heads.

• Ink Advantaje Deskjet 3545: printer does not detect the computer

  When I try to scan something, the printer displays a message saying:

  "No found computer."

  Make sure that the printer software is installed on your computer, and that 'send to the computer' is enabled.

  But it is set up correctly, and when I print from the computer via USB, it prints very well.

  @Tuti_Delme

  Update to improve performance of the printer HP Deskjet 3540 series firmware

  http://ftp.HP.com/pub/softlib/software13/Printers/HPDU/DJIA3540_VR6/HPDeskjet3540series_MLM1FN1449AR_x86_000_003.exe

  Then try to run this.

  HP printer install wizard for Windows

   

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  After that.

  HP Print and Scan Doctor

  http://ftp.HP.com/pub/softlib/software13/COL50849/MP-145514-4/HPPSdr.exe

  REO

• Why the menu highlights color does not cover the text?

  Hi, for some time now, creating DVD menu highlight color (all that I choose) was not completely covering the text and looks bad. I have attached a screenshot. The menu was created in Photoshop.

  Thanks for any help

  seanw14574285 wrote:

  Hi Neil, I also thank you for the answer. The ratio is 1300 x 720 (I thought it would be 1280 x 720, but that's what he showed me under the size of the image).

  The highest point is the text, if it is the result of doing what I described in my response to Stan. Right click and select the text, then 'object', "convert to button" allows me to import psd. When you talk using an icon instead, can you give me an example? Does that mean that I could have the text in the chart, but create a circle round beside him in photoshop or similar then convert that circle to a button in again?

  Hiya Sean.

  First problem is the size of the beast - 1300 x 720 is not good for the DVD, nor is 1280 x 720 - you need to 720 x 480 (NTSC) pr 720 x 576 (PAL).

  NTSC widescreen turns a pixel aspect ratio (PAR is something different to the resolution of the image) of 1.2121:1, PAL around 1.4: 1 so the pixels are not square to start by - they are stretched (aka "anamorphosée").

  This will distort the text from the beginning, and if the background uses also text with a climax as the overlay so no one will be the same.

  I gave up with the text for the buttons a return long (it will work in Blu - ray the nature of square pixel addition 256 colours allowed for buttons) because the limit of 3 colors of the subpicture select Layer (the image of the button real itself) really means that at best all overlays of text button will be shredded. I often use a pixel 8 by 4 pixels rectangle, drawn in Photoshop. This seems to properly size.

  Your description of the process is approximately correct in yet. It should work.

• test page prints fine when I send a page color to print any color comes out and the black looks like

  I have a gateway GX 7022E Prod. D945GBI CPU Intel pent D 32-bit PRINTER HP photosmart 7960 OS Windows XP 32 bit

  No error message last week that I could not print in color my documents or on the Web or my camera... If I hit a test in my printer the roadmap page came out perfect with dark black text and 3 color bars, which were veiny any deep color. To the printer directly, it seems to work... From my computer to the printer it does not print in color but is printed in black & white... I spent hours with all the tools of diagnosis HP WITHOUT HELP I downloaded the new drivers, NO HELP

  Anyone can come up with a fix for me. ;. I forgot to mention that I'm a fool

  Thank you very much

  Gary

  Gary Braverman

  First thing you should check is the print settings in the driver.  You must ensure that the driver know that you want to print in color and black and white only.

  To check/change the settings of your printer driver:

  1. From the desktop, click the Start button.
  2. Click on Control Panel.
  3. Find printers and fax machines.
  4. Once your in the folder printers and faxes, find your printer.
  5. Right click on your printer.
  6. Click on Preferences.

  Now you should be in the area to check the layout and paper/quality settings.  Make sure it is set to print in color.  Don't forget to look through the advanced options.  Make sure that it is located and let me know what happens.

• Intuit quicken does not print the black font with Windows 8.1

  When I print the reports from Quicken 2008 on my HP 4500 Wireless printer, only major titles that have shadows and text print.  (the red numbers can also print in red).  Reports printing OK on another printer. This issue was raised only since I changed my computer and operating system went from Vista to Windows 8.1.

  Other assignments you suggest to download another driver, but is there other drivers that are compatible with 8.1?

  Hi Toronto61,

  Thank you for your answer!

  Certainly there is software and drivers available, located on this Web site. Driver and software of HP Officejet full feature.

  Before installing I would recommend to uninstall snack, there are still old software on the computer. Uninstalling the printer software.

  Then I would clean the computer starts. How to perform a boot in Windowsand to use the printer HP install wizard for Windows. If the printer HP install wizard for Windows does not then download software driver full of features with the first link I provided.

  I hope this helps!

• Fonts CSS colors to see all the black square

  I created an external CSS to a template that I designed. When I linked to the CSS, all font colors, that I chose air well in Dreamweaver, but when I saw in the browser, any type that is supposed to be a color appears as black. Help!
  
  In addition, I can not the color of my links to work as I want... no matter how I set the color of the links, they appear as the default Dreamweaver, underscore and all colors.

  Thank you. You are my God for the day!

  Richard

• My HP Photosmart C8180 All-in-One Printer does not scan the black and white film strips or slides.

  This problem occurred recently. Previously, the scanner accepted slides and strips of black and white film and scanned them without any problem. Since I've updated the OS on my iMac (I am currently using OS X 10.6.8), I contacted Applecare because I thought that it was possible that my current operating system might have some incompatibilities with the C8180. 'Expert' AppleCare then accompanied me by a uninstall/reinstall, but it has not solved the problem. AppleCare said then that the problem is no doubt HP hardware failure. I find it quite peculiar since the scanner otherwise Applecare analysis works and there is no problem with respect it print or copy.

  Hi, JAOC,.

  Your C8180 can scan slides or films fixed on the memory card.  This will allow you to test the scanning equipment.

• Windows media player does not detect the black cd in d drive to burn some music?

  I am burning music from my library on a black cd on drive D.I had a ready to burn playlist, I incert black drive up there, where he said burn cd now it says cd, incert black, but I have aready done itself do not know why I can start to "burn?

  Hi natesalgado,

  1. did you of recent changes on the computer?

  2 when was the last time you were able to burn audio CDs with Windows media player?

  3. you have any third-party DVD burning software installed on the computer?

  See the Microsoft articles below and check if it helps.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  How to troubleshoot Audio CD creation in Windows Media for Windows XP player

  http://support.Microsoft.com/kb/306319

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• DeskJet 5550 does not print after I installed new black ink cartridge.

  I recently got a new Dell with Windows Vista 64 - bit OS.  Printer was working fine until I replaced the black ink cartridge.  Print the control page as usual after you install the cartridge, it will not print anything else now.  Not even a test page.  I tried taking the cartridge out and put it back in.  Tried to pull the plug on the back of the printer and plug it back.  Tried turning the printer off and on again.  Also tried to restart the computer.  I downloaded the HP Print Diagnostic report and could not find any problems.  Could there be a problem with the ink cartridge itself?

  Well first of all, I went and bought a different black ink cartridge to remove the cartridge in the problem.  This was not it.  Then I unplugged the printer and cleaned thoroughly and connected plug.  Still did not work.  Then I went into the properties on my printer and started to play with the settings.  FINALLY I FIXED IT!  I clicked on the tab advanced and then click Print Processor.  I then changed to WinPrint and retried the Test Page printing under the general tab and it worked!  Woo Hoo!

• 3636 Deskjet all-in-One: ink cartridge is Deskjet 3636 configuration necessary?

  The black cartridge for installation provided with my printer all-in-one Deskjet 3636 recently bought is defective. My printer does not recognize the cartridge. I followed all the troubleshooting steps, including turning on/off the printer and the cleaning cartridge, however, nothing works. What the configuration required to install cartridge? The color cartridge is recognized and the printer is connected wireless. The only issue I'm having is the black cartridge. Could I buy a regular black ink cartridge and use it for the first impression?

  Yes, you must use cartridges for initial Setup configuration and operation of the printer. The best way to solve this problem is to put the printer in return for Exchange.