"ink cartridges appear 2 b ordamaged missing" shows after clearing jam transport impression. Not fixed type

Similar Questions

• Problem cartridge Photosmart C6380 ink cartridge appears to be missing or damaged

  When I installed a new cartridge black HP, after the existing black cartridge HP showed no black ink on paper, the message on the screen says "Ink cartridge problem - the following ink cartridges appear to be missing or corrupt" and indicated that the black cartridge was at fault.  I tried an another new cartridge HP black and had the same result.

  I can't use the print head clean installation/tool while the message remains.

  I have reset the printer (several times) by unplugging the power cord from the printer, while the power was on, wait at least 30 seconds and then reconnect the power cord to the printer.  All to nothing does not.

  Any help you can give me would be much appreciated.

  Thank you.

  After having tried many suggestions from the Forum, including cleaning the printhead twice, I abandoned all hope and withdrawn for all connections of my Photosmart C6380 and instead, began to investigate other (not HP) printers.  A few days later (I'm slow nine material selection!), I thought I would connect my printer to my computer for one last try.

  AMAZING RESULT!

  The printer has recognized all the cartridges HP 5 as he had already said that the (new) black cartridge is missing or empty.  It then proceeds automatically to clean and align the cartridges, taking more than 10 minutes in the process, and finally it print a sheet showing that the printer was working again.  I had to restart the computer before I could print normal leaves.

  It seemed to me that the printer for a long period of isolation meant the printer lost recorded "information" and so had to start again.

• Ink cartridge problem C310a: the following ink cartridge appears to be missing or damaged.

  Error message on the printer for the second time in a month. Ink cartridge problem: the following ink cartridge appears to be missing or damaged. (Blue ink) Refer to the printer Documentation. This error message came in January so I replaced the blue ink cartridge (I use genuine HP cartridges) it is now once again, so it takes the printer not the cartridge. There is nothing about it in my "documentation" and nothing relevant came in "troubleshooting."

  Hi there JanePr, welcome to the Forums!

  I understand that you see an error message on your Photosmart C310a on the ink cartridge is missing or damaged. The print head may have a problem that could trigger this error. I have a troubleshooting guide that I recommend that follow you, however, if you have already tried no steps, ignore them, as the replacement of the cartridge.

  Guide to link: http://support.hp.com/us-en/document/c02255339

  If you follow the steps and the question remains, I would recommend then call HP Technical Support to see other options for you. If you call in North America, the number is 1-800-474-6836 and for all
  other regions, click here:
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Take care

• Ink cartridge appears to be missing or damaged

  I have a Photosmart Premium C309a printer.  I just installed a magenta cartridge and this message appears.

  ' The following ink cartirdge (s) appear to be missing or damaged. (pink square symbol) refer to the printer documentation. »

  I looked in the manual and cannot find any soluations.  It's very frustrating, because I can't use the printer!

  Hi Castletonway,

  Welcome to the Forums of HP Support! I see that you have recently replaced your Magenta cartridge on your HP Photosmart C309a printer and now get the error "the following ink cartridges (s) appear to be missing or damaged. (symbole carré rose) refer to the printer documentation ", I understand your frustration and I would you start here:

  "Ink cartridge problem: following Print cartridges appear be missing or corrupt"Error Message is displayed on the computer.

  Please complete all the steps in order and let me know the results, I'll watch for your reply.

  Thank you

• C310 ink cartridges appear to be missing

  I just changed cartridges and now I get a message that all are missing or damaged. What is the cure?

  Hi Jackshows,

  Try the steps listed in this document:

  http://support.HP.com/us-en/document/c02255339

  Reply back if none of them work, and we can try to go deeper with your problem.

• hpC4480 oneprinter: incompatible ink cartridge appears on the screen after each draw

  I replaced a cartridge of ink three colors and recharge them the new black cartridge 75; after they are put in the printer, the incompatible cartridge message appears on the screen, I followed the instructions on youtube andgot to work. However whenever a printing will be done, I have to repeat the process for the printer to print again.

  Student thanks to honor jdm; I called the dealer who has filled the cartridge and he told me it was probably damage, perhaps because it has been used after the printer showed the message "low ink".

• Even if I put new ink cartridges in the windo continues to show low ink I can do to fix this?

  How can I change the view of low ink even though I put new cartridges in?

  Hello

  What is brand and model printer?

  Method 1: Run the fixit

  Diagnose and automatically fix the problems of the printer and printing http://support.microsoft.com/mats/printing_problems/.

   

  Method 2:

  See the following Microsoft article:

  Resources for the resolution of the printer in Windows XP problems

  http://support.microsoft.com/kb/308028.

  Method 3: Update the drivers

  a. click Start, click runand type devmgmt.msc and press enter

  b. right click on the device driver you want to update

  c. click put to update driver and follow the instructions in the wizard.

  If the problem persists I suggest you please contact the manufacturer.

   

• Missing toolbar after upgrade FF. Instructions to fix the failure.

  A few days ago I received a message that there is an update of FF, so I allowed the upgrade. Immediately after, he lacked my Roboform toolbar. I came here and found the article on the screw - up with Add-ons. I followed the instructions, which said to level again. I was told that I already have the latest version.

  Now what?

  Try to install Roboform last 7.5.6

• I have " access denied " which tent to open CBS.logs SF/scannow confirmed I have a missing or corrupt file system he could not fix

  I can guess that relates to all the questions that I have as follows; These are being administratively and come in last in the top seven, they are not here in perfect order I jumped on a couple. I understand that these contained the most critical news. All this seems to have started when I changed my host - public to private network network and then to the public, including the computer name change. I also added 1 GIG GIG 3 original RAM and virtual memory increased minimum size of about 4.5 GIG. My apologies in advance because I know it's a mess, I can only hope recoverable solutions and realize there is probably more than one root cause\factor\event _ name of the journal: Source system: Date of Microsoft - Windows - DistributedCOM: 18/08/2011 14:05:52 event ID: 10016 task category: no level: error keywords: Classic user: computer SYSTEM: Diane Description : the application-specific permission settings do not authorization for the application with CLSID {C97FCC79-E628-407D-AE68-A06AD6D8B4D1} COM server the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC). This security permission can be modified using the Component Services administrative tool. The event XML: 1001602000 x 80000000000000388080SystemDiane                                                           application-specificlocallaunch{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}NT AUTHORITYSYSTEMS-1-5-18LocalHost (using LRPC)                                   _ name of the log: Application Source: Microsoft-Windows-CertificateServicesClient-registration automatic Date: 18/08/2011 14:05:49 event ID: 64 task category: no level: warning keywords: Classic user: n/a computer: Diane Description: certificate for the local system with imprint 4th 7 54 42 2 a 43 1 c has 20 36 77 0e b2 db FA 58 fb 58 44 cd is about to expire or already expired. XML of the event: 6403000 x 8000000000000035946requestDiane                                                                     local system4 7 54 2 a 42 43 1 c has 20 36 77 0e b2 fa 58 58 44 cd fb db     _ the journal name: System Source: Date of Service Control Manager: 18/08/2011 14:05:05 event ID: 7026 task category: no level: error keywords: Classic user : n/a computer: Diane Description: the next (s) starting or starting system could not load: i8042prt UimBus Uim_IM event Xml: 702602000 x 80000000000000388071SystemDiane                                                           i8042prt UimBus Uim_IM           _ log name: Application Source: Microsoft-Windows-user profiles Service Date: 18/08/2011-14:02:05 the event ID: 1530 task category: no level: warning keywords : Classic user: computer SYSTEM: Diane Description: Windows detected your registry file is still in use to other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.   RETAIL - 1 user handles registry are of \Registry\User\S-1-5-21-640629343-1760377013-3277728807-1000_Classes: 1768 (\Device\HarddiskVolume2\Windows\System32\spoolsv.exe) open \REGISTRY\USER\S-1-5-21-640629343-1760377013-3277728807-1000_CLASSES\Local Settings\Software\Microsoft\Windows\Shell\MuiCache key Xml of the event: 153003000 x 8000000000000035927requestDiane                                                                 1 the user handles registry is escaped from \Registry\User\S-1-5-21-640629343-1760377013-3277728807-1000_Classes: 1768 (\Device\HarddiskVolume2\Windows\System32\spoolsv.exe) open \REGISTRY\USER\S-1-5-21-640629343-1760377013-3277728807-1000_CLASSES\ Local Settings\ key Software\Microsoft\Windows\Shell\MuiCache     _ name of the log: Application Source: Microsoft-Windows-search Date: 2011-08-18 07:52:01 event ID: 3013 task category: unifying level: error keywords: Classic user: n/a computer: Description of Diane: entry in the hash table card cannot be updated. Context: Application, creates catalog Details: a device attached to the system is not functioning.   (0x8007001f) the event Xml: 301302300 x 8000000000000035923requestDiane                                                           context: Application, creates catalog Details: a device attached to the system is not functioning.   (0x8007001f) C:\USERS\DIANE\APPDATA\LOCAL\MICROSOFT\WINDOWS\EXPLORER\ZZZZZZZZZZZZZ.ZZ               _ log name: System Source: Microsoft-Windows-SharedAccess_NAT Date: 18/08/2011-07:42:39 the event ID: 34005 task category: no level: warning keywords: Classic user: n/a computer: Description of Diane: The ICS_IPV6 was unable to allocate bytes of memory. This may indicate that the lack of virtual memory, or that the Manager of memory has encountered an error internal system. The event XML: 3400503000 x 80000000000000387819SystemDiane

  Hello

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Office jet 8500 a after a paper jam, the message of the said printer ink cartridge is missing or damaged

  I had a paper jam, after I got the book out by opening the gate to the front, he said the black ink cartridge is missing or damaged.  I shook my head to feel a little and the message went away.  But now he says that the yellow ink cartridge is missing or damaged.  I didn't do anything the message disappears and it will not be printed.  The yellow cartridge was replaced just a few weeks ago and is still full

  Hello sharonc41,
  Welcome to the HP Forums.
  
  It seems that after getting a paper jam error set, you now encounter a cartridge missing error on your Officejet 8500 a. I will do my best to help you with this question.
  
  "The following document may be useful to resolve the"missing cartridge"error: an error ' ink cartridge appears to be missing or corrupt" Message appears on the printer control panel.
  
  Please read and follow all the steps in the document. I would like to know if he was able to help. If you have any other questions or need further assistance do not hesitate to ask.
  
  Thanks for posting on the HP Forums.

• Printer says I have ink cartridges in the wrong housing but they are not

  I have a printer HP Photosmart 7510 who keeps saying that I have the cartridge in the wrong slot. All 5 are in the correct locations.

  Take a look on the link following which treats problems ink cartridge.  Click here  You did most of these, but do not yet made steps.  The link suggests you clean the contacts again.  Make sure that the cartridges are level with each other.

  If this does not help, I suggest you do a reset of the ink system.  To do this, remove the printhead and ink cartridges.  See this link.  Close the access of transport cover.  Follow the reset instructions in the following link.  Click here  Once the printer rear lights up and indicates that the print head is missing, reinstall the print head.  Close the access door.  When the printer indicates one or more of the ink cartridges are missing, reposition one of them and close the access door until the cartridge shows.  Repeat the process until all the cartridges are reinstalled.  This aid?

• HP Deskjet 3600 series. Initializing ink cartridges? More than 3 partners? s

  Hello:

  I was recently offered a printer HP deskjet 3620 or 3650. I have only the manual for it to 3600 series moment.

  There are 27, 28 & 58 ink cartridges.

  My questions are:

  1} require initialization of ink as many HP printers do or can I use regular cartridges. The original inks disappeared somewhere in transit.

  2} If initializing cartridges are required are they still available?

  3} it is my understanding that this printer has never been created or had it ink.

  y at - there a way to tell if this is true? There is now no cartridge inside and it appears unblemished, even if all the original packaging has been removed.

  4} am I correct to assume that if the ink cartridges installed previously to a point that this printer is useless that the print heads are probably blocked.?

  Please notify.

  I saw this place is around the same time that your other post.  If you just want to know about the initial optimization process of your printer for the best performance?  To install ink cartridges are available and are used to prepare the print head, but are not absolutely necessary.  You don't have to contact HP for Setup ink cartridges for him.  You can call technical support at 1-800-474-6836 (US) or follow this link to get the phone number for your country and ask them to order it.  Or call 1-888-999-4747 HP Home and Home Office, but I don't know if you can get them at the store. Just as a previous tech support agent I know I could order setup of ink cartridges.

  A lack of alignment can occur if you do not use the first time ink installation cartridges, but I doubt it.  There is no way of knowing if she has never had ink in it before without having already inked and install on the computer in order to access the Toolbox and then choosing to print a test page that may have this information on it.  On newer models,'s called it a Printer Status Report.  It will tell you all about his prior use.

  I don't think the printer hangs another ink in there if there is no ink installation cartridges installed the first time.  I don't know the refilled ink cartridges may damage the print head, but I think that you will be sure to use regular ink you'll be safer if you call, your printer is in or out of warranty.

  Here is a nice little document all about these issues and much more.  I hope this helps!

• DeskJet 712C: ink cartridge is stuck in the right side and will not go

  I have an old DeskJet 712C printer which was working fine until today. Strangely, the ink cartridge is stuck in the right side of the printer and will not spend. As soon as I turn on the printer, the red light starts flashing. Does anyone know tricks to get the cartridge to move again? Thank you for your help.

  Hello

  It may be possible to move the cart if you turn the printer off. Unplug the printer and open the cover of the printer.  See if you can move the carriage by hand.  If possible, move the carriage to the Center.  Check that nothing of blocking the abnormal movements of transport - for example the pieces of paper.

  Close the cover and then plug the printer back. I hope this will help.

  I found a YouTube video that shows fixing carriage jam on printers C4200 (I know that they are not the same as the 712 C), but some of the suggestions will be useful if my initial thought above does not help.  the video is on this link:

  http://www.YouTube.com/watch?v=l9x6ZLIYMog

  Once again these tips are not specifically for your printer, but they can help solve your problem.

  I hope that was helpful.

• HP Officejet Pro 8610: HP Officejet Pro 8610 does not recognize ink cartridges

  My printer has ceased to recognize its ink cartridges. In a first stage, the problem happened occasionally and could be fixed by installing and reinstalling the cartridges or just wait a few days, but now it is continuous.

  When I turn on the printer, it immediately gives me an error (without code), saying that it cannot find the cartridges. All four are marked on the screen as not found. I followed the instructions of troubleshooting here: http://support.hp.com/us-en/document/c04090902

  The cartridges are genuine, they are the ones that came with the printer. I removed the, checked the contacts of the four. They look damaged or dirty, but used a cloth to clean all anyway. Put back them, did not help. Checked the latch, it was in the correct position. I even tried the restart without result.

  I tried to replace the cartridge with a new one (again, product HP genuine), but does not replace the printer either. And because all cartridges have failed at the same time, I can hardly belive the problem lies in them.

  I come from Finland, and I've not found a phone number, I could ask for help. Does one exist even for my country?

  Hey @Leathert,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I see that your Officejet Pro 8610 e-all-in-one printer does not recognize the cartridges. I could help you with that, but it seems that you have already found the HP document that will guide you in troubleshooting. Instead, you can contact HP (in Finland) support by clicking this link.

  I hope you get your sorted question and I hope you have a great weekend!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• OfficeJet 4635 cancel the firmware update because my ink cartridges are for older versions of the product

  I was happy with my officejet 4635 until I clicked on ok to apply for the HP firmware update. He said that it would improve my printer. However, demand has not said that my ink cartridges may not work if I installed the update. I clicked on ok and the update has been successfully installed. Now I can't print anything because I get an error message saying the I have ink cartridges are designed for older versions of the product. I do not use the new HP cartridges because they cost too much. I used cartridges refilled abacus in Az. Phhoenix which worked fine up until I did the update of the firmware of HP. I need to go back to the old system, so I can print again. I am connected to a desktop computer HP envy running windows 8.1. I'm furious HP to try and force you to buy their new cartridges with an update of something. I think that whoever came up with this update should be fired. Any help with a solution would be appreciated.

  I was told that there is no way to undo the update of the firmware. HP did send me a few ink cartridges so I could print again, but I am still ticked about the way this has been ensured by HP. They have not told me that my old version cartridges would not more work after updating firmware. I think that it is simply dishonest on part of HP and I am sure that other customers have been captured by this update of the firmware. I am sure it was a HP effort going to force you to use their new cartridges. I'll be very careful on the acceptance of the updates from HP in the future.