insensitive cursor or jumpy on a touchpad

Similar Questions

• Jump 8 windows cursor when the finger on touchpad

  Just bought a 1015E Asus laptop.  The cursor jumps around when a finger is on the touchpad when the finger is stopped.  I tried the sensitivity setting and increase pointer is selected.  Problems continues if I change the sensitivity and if I deselect enhance pointer.  I think that it is driver related. If I take my finger on the touchpad or the finger is in the lower left or lower right click typical of the areas of the touch pad it keeps jumping around.  Thanks in advance.

  Hello

  
  
  
  
  Thanks for your posting in Microsoft Community
  
  
  Concern seems to be a hardware
  This type of isuse happens chipset and energy management and the touchpad is not properly installed or defective hardware
  Some laptops may have a button around the touchpad or an icon in the system tray that allows you to temporarily disable the touchpad.
  
  
  If you have other devices of entry as a mouse, keyboard, graphics tablet, etc., try to unplug these devices to ensure that they are not the cause of your problem.
  Make sure that your laptop has the latest Bios Update
  
  
  
  
  Please contact asus team or visit the website to download driver download above driver and install
  If the same question post here for more information
  
  
  OR TRY THIS
  
  
  1. Click Start and select Control Panel.
     
  2. Double-click the mouse control panel.
  3. Click on the large icon of the Touchpad that is in front of you.
  4. In the main menu of the Touchpad, click on the button of device selection.
  5. Place the Stick pointing to Disable radio button.
  6. Place the radio button buttons pointing to Disable.
  7. Click OK.
  8. In the main menu of the Touchpad, click the button of the Touchpad settings.
  9. Uncheck the tap click checkbox.

     Note: You can move the sliders Touchpad speed and tactility to the parameters of your choice.

  10. Click OK.
  11. In the main menu of the Touchpad, click the scroll button & Zoom parameters.
  12. Clear the check box turn on Zoom.
  13. Clear the check box enable the circular scrolling.
  14. Uncheck the enable box.
  15. Click OK.
  16. In the upper right corner of the main menu Touchpad, click the X to close the control panel.
  17. Close the Control Panel window.

• Insensitive cursor

  As soon as I connect as long as my user, my cursor becomes unresponsive. It still works until I click on my name for the connection, and the keyboard works fine. I am now in "safe mode with network" and the slider works. She becomes unresponsive when I connect. It happened all of a sudden while I was using my computer and, to the best of my knowledge, did not change any settings.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  This is the recovery and repair of Vista Forum.
  Your question relates to the hardware and drivers Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• 13 spectrum HP ultrabook: cursor disappeared and the touchpad no longer works. Usable only to touch screen

  When I turned on my ultrabook today, the cursor is invisible. The touchpad is also that no longer respond. I can only use the touch screen. My product number is G1Z94EA #A2N

  Hi @Reem12,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer laptop 13-3003ex of spectrum HP and issues with the Touchpad and the cursor in the process of disappearance. Some say that you could restore the BIOS using factory default values with this. Here is a document that shows you how to restore the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• mouse cursor Compaq evo

  Hi I amstill having trouble with the cursor of the mouse and touchpad it will not move on the side of the screen only upwards and downwards. I tried the ps2 mouse and series it even. bought a laser wireless mouse installed it can move the cursor across the screen put it next jumps as he fixed elastic. I'm running xp pro tried another hd with win2000 is the same so it does not win xp it must be something elsecan someone help.robin

  Hello

  Thank you removed Touchpad to check finds it right blue button was stuck block cleaned and given keys and cursor back to normal. Maybe you can help with my other computer compaq evo n620c laptop it boot in the bios, and then when he tries to load windows it keep restarting or restarting.robin

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• FN + F3 disable the Touchpad does not work. Dell XPS L702X

  Hello, I am new to this forum.

  The function FN + F3 that disable the Touchpad does not work, my laptop Dell XPS 17 (L702X)

  I googled my problem and the only thing I found was this: http://en.community.dell.com/support-forums/laptop/f/3518/t/19454265.aspx

  I think that my problems with the touchpad started when I plugged a mouse into the USB port. It didn't work (it worked well before), and in material-sound-mouse control panel, the system asked me to uninstall a driver or other. I do not remember, but later the mouse worked.

  After this weird thing with the mouse, I noticed that the touchpad was malfunctioning. While I write, the cursor moves without touching the touchpad, it is annoying because it makes me write bad because he is moving in the middle of writing, as I write so it's a mess.

  The second oddity, the Fn + F3 does not disable the touchpad, the orange light come on (the led on the top of the touchpad), but the cursor can be moved in any case, with or without a connected mouse.

  I checked for driver updates, perform an audit of the system, checked for viruses, spywares and I don't know what I could do. I don't know if the problem with the mouse had nothing to do with the function Fn + F3 problem.

  I have not formatted or re installed windows 7, never.

  In Device Manager I have this:

  -mouse and other pointing devices:-Compatible PS/2 mouse

  Help, please. Thank you.

  DOH! Problem between Chair and keyboard...

  C:\dell\drivers\R289237

  Run the executable file of Synaptics.

  Download of extracts only the program on your disk. You must manually install the driver for the Synaptics touchpad with its own executable.

  FN + F3 now disables =)

• Running for some time, firefox 'hangs' every 7 seconds 3 seconds, typing, scrolling, navigate... all functions to follow the cycle of 7 seconds break. Why?

  This problem does not appear to exist until "free" download of Windows 10 installed. I've waited too long to return to 8.1, now stuck with the $ @# @ 10 software. Using a FF browser "synchronized" to work (win 7) I have no problems with the cyclical lag during typing, scrolling, etc. Be totally irritated with win 10, I tried once again to try Linux (Mint) and noticed that the SHIFT does not seem to be there when you use FF in Linux, which has installed from their 'package '. This shift occurs every 7 seconds to 3 seconds of insensitive cursor, typing keystrokes, scrolling action... whatever. Suspecting some 'supplement' to go funky, I have removed ALL addons... no improvement. This forum works on 64-bit, 2 gig memory, relatively new machine that had no question to win 10.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select the Options under Windows or Preferences on Mac or Linux.

  2. Select the Advanced Panel, then on the general tab.
  3. Uncheck the use hardware acceleration when available.
  4. Restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  Thank you.

• Satellite U840T - mouse disappears on the right of the screen and down

  I have a problem with my Satellite U840T screen

  The mouse disappears on the right of the screen and the background in the black bars at the top and then the left side of the mouse cannot go to bars.

  In the display settings, everything is good, I think.

  Thank you for your help

  Hello

  I confused m.
  Your question isn't described very well.

  What do you mean exactly by: mouse disappears on the right of the screen and the background in the black bars at the top
  Do you mean the touchpad or the cursor?
  The laptop's touchpad supports the (multi-touch) gesture control feature, and this feature could be configured in the settings of the touchpad:
  + Control Panel-> mouse-> device-> settings settings tab.

  You will also find the option called shots of edge which opens the charms, app Switcher bar and toolbar Application simply by moving your finger between the edge of the touchpad to the centre.

  In this case the cursor is not visible.

• Windows 8 start not

  I have a windows system 8 G500 and my windows that I don't know what happened, but when I start it, it displays the windows logo and then a black screen appears with the cursor, the cursor will move along the touchpad, but windows does not show anything else on the screen. So, windows begins nor (I guess that the movement of the slider) is suspended.

  I thought to reinstall or repair windows from a windows disc 8, but can not enter in the boot menu.

  Can someone please help...

  Got his solution to the microsoft forum.
  The drivers installed were not compatible with the operating system.

  They told me to remove the battery and start the laptop the power cord only. It worked. and my laptop works fine now. I downloaded new drivers from lenovo Web site and its all good now.

• Windows - Slideshow__ Photo Gallery

  No problem to start the slide show, but I am unable to see my cursor (with the mouse or touchpad) on the screen, for example, change the "Theme" or use any other control

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello - is it that someone / Irfan here? !!!

  =================================
  No guarantee, but it might be interesting to try to uncheck
  "mouse pointer trails.

  Start / Control Panel / hardware / mouse

  If this does not work...

  You might have a problem with your video driver... If
  you reduce the graphic hardware acceleration as
  According to the instructions in the following article... you can
  See an improvement. If... Yes, you need to update
  your video driver. (improvement or not... do not forget to)
  return to full acceleration after the experience)

  How to change the graphics hardware acceleration
  setting in Windows
  http://www.geocities.com/bearwindows/263391.htm
  (Scroll down to: on a computer that is running Windows Vista) John Inzer - MS - MVP - digital media experience

• BSOD SYSTEM_POWER_STATE_FAILURE 9f

  Dear community,

  I meet a BSOD with DRIVER_POWER_STATE_FAILURE (9f) on a new laptop running Windows 8.

  Time randomly when it interacts with the laptop, is the following:

  1 mouse cursor disappears

  2. the Touchpad no longer works

  2. touch screen no longer works (this laptop has a touchscreen)

  3 minutes later the BSOD appears.

  The crash dump can be found here:

  https://www.dropbox.com/s/wz3tw48t1eiat8h/042715-21125-01.dmp?DL=0

  Tried many things:
  1 reset the unit to factory settings and reinstall my software there (Nothing esoteric, just from Visual Studio, GIT, etc..)

  2. run the check disk etc. No software of balance sheet not found problems with the system.

  3. after speaking with Dell customer service, they sent me a replacement laptop. It has the same problem. Therefore, the question should be on the software side.

  Help, please! Thanks in advance,

  -Britta

  BR

  This phenomenon was linked to you video drivers (nVidia).  I remove the current driver and install the latest driver available.

• I accidentally disabled my mouse/touchpad? (on another laptop... Sony Vaio) I can't move my cursor. How it back on?

  I accidentally disabled my mouse/touchpad?  (on another laptop... Sony Vaio) I can't move my cursor.  How it back on?

  Hi Jakes,

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you are not able to move the cursor with touchpad.
  Let us move forward and help the issue.

  If you could answer a few questions that would help us resolve this problem:

  "1. What do you mean by" ","I accidentally disabled my mouse/touchpad?

  2. where did you make changes in the computer before the show?

   

  We invite you to check out the link and follow the steps in the article:

  What if the touchpad is not working properly, works without touching, functions intermittently or erratically or is completely insensitive?
  http://www.Sony.co.in/support/FAQ/409262

   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Touchpad cursor gets hard to control "woozy"

  Recently, I went back to using my Mac Pro 2009 after using a Macbook to the past two years for most. I upgraded to El Capitan first, and I decided to start a new account because I've been migrating the same account for 20 years. So all is cool enough for most.

  I had used a magic with the MacBook Pro touchpad because I hated the portable computers clean touchpad. Having become accustomed to the use of the touch pad, that I decided to use it with the Mac Pro. I use the touchpad, even for the last two years.

  Here's the problem: I have not yet identified which triggers it but what is happening is that the slider will frequently and suddenly become what I can only describe as 'under the weather', and I hope it makes sense. It becomes slow and its response and tends to overcompensate sometimes I have to be very careful and precise and slow in my movements when it's like that because if I use my hands the way I would normally be the cursor will overshoot.

  It does not have it for long periods of time, but he does not often. And it makes me a little nuts. Any ideas?

  Really?  No one has an answer here?  I'm going crazy... and now my stylus is dead, so I am forced to use the touchpad! (I can't use a mouse because of repetitive stress injury)

  If anyone has any ideas, please share!

• Satellite Pro U300: the cursor of the touchpad does not respond

  Cursor does not respond

  Hi dude

  Have you checked if the touchpad is probably disabled?
  You can enable and disable the touch pad by pressing FN + F9.

  In addition, it would be interesting to know if you can use the USB mouse properly.
  If more information is needed