Laptop does not see additional RAM memory

Similar Questions

• R50E installed new hard drive, laptop does not see...

  Hello

  Just installed a new hard drive, one old man went beyond repair, the disc is out of the package, I format, partition, but the laptop does not see...

  I wonder how I can do... I do not have the recovery disks, but I can get them if it will solve the problem

  Thks

  Thks for yr reply

  But the problem is solved, it was a hard drive defective, even if she was new out of the package, returned to the shop, tested found inoperative, replaced by another that everyone ok

  concerning

• laptop does not see the disk of works 9

  I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
  My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
  It works on my desktop which has windows xp system opp on him.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.

  See you soon. Mick Murphy - Microsoft partner

• AAE does not see my RAM?

  When I start the EFA it says 5% used 2.0 GB

  When I have 4 GB

  I thought that maybe there they were broken, but my directx diagnostic tool shows all 4 concerts

  as well as my startup screen

  So what is wrong? when im same ram realized it says like 58% used 2.0 GB and I don't know why he can't see the rest

  any help?

  Impulse fire wrote:

  I don't know why he can't see the rest

  Be assured that AE sees all your RAM in the boundaries of the operating system imposed. RAM allocation is dynamic, in any case, off what EI options offers in his memory and the performance of the panels, there is no way to enforce more consumption of RAM. And you wouldn't want it that way, so as long as your operating system does not act funky when AE is running, there is nothing to worry about.

  Mylenium

• I can play most cd or dvd is ' s.laptop does not see an installed dvd

  I can't read cd or dvd. Auto-start is selected.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Laptop does not see the cd drive

  My laptop can't see my cd drive.  I did some troubleshooting and he said: he can't install the driver.  How can I fix it?

  From Internet Explorer

  Original title: cd player

  Hello

   
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. what troubleshooting steps you already performed?
   
  I suggest for the link and follow the steps in the article:
   
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060#top
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry
  How to back up and restore the registry in Windows
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• has running kill disk, vista has disappeared and my laptop does not see my dvd/cd drive

  I installed ubuntu to see if I could change my cd drive letter ther beginning could not understand. If someone could help iid appriciate it. I'd like to reinstall windows

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.

  E710 OfficeJet 6500 a Plus

  Laptop Dell Windows 7 64 bit version

  The printer is set to work wireless.

  I have the printer set in place.  I could print my wireless test report and have determined "That I have successfully setup my printer wireless."  But when I try to configure the printer on my computer and it asks IP... I give the IP address and it did not recognize the "Can't find printer" looks like I have witnessed this process again and again today.

  I disabled my firewall by following the instructions.

  I used the tool for "troubleshooting your connection to a network printer" stage 5 "

  Then he told me to go to the HP support forum.

  Help, please.

  Thank you

  DB64

  I had charged down the bad print driver.  My printer is a more... years had loaded the wrong printer driver.

• Why my laptop does not see my cable modem?

  I am trying to fax to e-mail, but my computer can't see my cable modem

  Hi Ateam_03,

  This problem is related to the ISP that is why you may need to contact you are internet provider (ISP) for assistance.

• Satellite A200 - 23 c does not see the 2 GB Memory Stik Duo

  For me for laptop Toshiba Satellite A200 23 C. I

  t does not see memory card 2 GB Memory Stik Duo. I changed operating systems that did not help.

  All devices to see this card but on my laptop is not present.

  Other maps of working memory. How it can be a business.

  If possible, write in Russian and in English not absolutely understand that.

  Thank you

  First of all in this forum, you can post only in the English language. Other languages are not tolerated.

  Back to your question;
  Have you checked if your laptop Satellite A200 - 23 c supports this type of card?

  I ask because not all cards can be used in the slot of the card reader!

  As far as I know this laptop supports:

  -SD Card 8MB - 2 GB
  -SDHC 4 GB card
  -16MB - 2 GB xD Picture card
  -Memory Stick 8 to 256 MB
  -Memory Stick Pro 256 MB to 2 GB
  -MultiMediaCard 8 MB - 1 GB
  -miniSD (with SD adapter) 32 MB - 2 GB

  The Memory Stick Duo is NOT supported!

• Pavilion dv6: computer HP pavilion laptop does not start and I do not see the screen because it's broken

  I have the HP pavilion computer laptop windows 7 and I broke the screen about a year, I can't see the start menus. I have been using an external monitor and it has always worked well, but now I can't see how to fix my computer to boot.  I did a hard boot but nothing happened, and with a broken screen, I can't see any of my options on how to fix it.  It does not start.  Looks like it is, but because I don't see the menu F8 or Boot, I can't call themselves that the screen can be done.  Help, please.

  Hello @SPKaler,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post on the issue with the laptop won't start does not and wanted to help you!  I understand that the screen is damaged and you are using the external monitor to view the screen.  However, now that the laptop does not start, you can see is more of the external screen to see what is happening.

  From my understanding, you should not be able to see an image on the external monitor, until you start the operating system.  You can try to perform a system restore by using this document:

  HP computers - performing a recovery of system HP (Windows 7)

  You may be able to follow along, long enough until the image is displayed on the external monitor.  Otherwise, you can contact HP support by phone, for additional options.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• Satellite Pro C850-1HE does not receognize new RAM Micron modules

  Greetings

  I have a laptop Toshiba Satellite C850. I bought it on amazon UK and it came with 2 GB of RAM.

  I'm really happy with it, but 2 GB of ram is no longer enough.

  Last week, I bought 2 GB more RAM.
  The packaging said KomputerBay, but the manufacturer is in fact "Micron". So I installed and activated on my laptop, but my laptop does not recognize the memory of Micron.

  The bios says I have "2048MB" of ram installed, instead of 4096 MB. Therefore, Windows and Linux can recognize only 2 GB of ram.

  Then, I removed the ram original samsung and pressed the power button with only the Micron ram installed. Unfortunately, the computer has not yet shown any image on the screen.

  I have already tested the Micron on an old laptop Toshiba Satellite L650 module and it works like a charm. Thus, the ram is not defective. In addition, the ram is placed correctly because CPU - Z it detects correctly:

  http://i.imgur.com/DMROayG.PNG

  Also, I've updated the BIOS and I use recent toshiba Web site orders. Is there anything I can try to make this ram works on my laptop?

  > Is there anything, I can try to do this ram works on my laptop?
  I don't think so. For me it's the compatibility issue. Send it back and buy 100% compatible module for your laptop model.
  Your laptop model can be improved up to 16 GB and compatible RAM modules have tracking numbers:
  2 GB DDR3-1600-PA5037U-1M2G
  4 GB DDR3-1600-PA5037U-1M4G
  8 GB DDR3-1600-PA5037U-1M8G

• iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  iTunes on my laptop does not recognize my iPhone 6. My laptop, it is just the iTunes is not working.

  If you do not see your device in iTunes for Mac - Apple-Support - https://support.apple.com/HT203979

  Device are not not immediately after the upgrade - https://discussions.apple.com/thread/6573744 - try to restart

  You don't say anything on your computer.  I don't even know if it's a Mac or a PC. This may apply to you:

  iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher.  Update of the system only checks the updates for the current version of the system you run, but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM.  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion

  Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Satellite A30 does not see other devices in the wireless network

  I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?

  I have a laptop of Satelite A30 1 GB ram 60 GB HDD.

  Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.

  Is this a driver problem?

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.

  Hello

  If the wireless network adapter is properly installed if you have not configured you.
  I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.

  I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.