View composer does not see the VM images parent after Virtual Hardware 7 upgraded?
I upgraded to 4.0.1 view last month, then there are 2 weeks, we have upgraded to vSphere. After the upgrade, I upgraded to VMware tools of a VM parent, improved virtual hardware 7 and took a new snapshot. When I go to the view admin console I don't see the new snapshot, I made available in the form of default image. It works very well so that the virtual machine is stored virtual hardware version 4, but breaks after moving to 7.
Did I miss a step? Anyone else seen this problem? I'm close to the opening of a case of pension on the issue.
It is an option on an existing pool. Just change the pool and go to either host or a cluster. The box should be at the bottom of the page.
If you have found this device or any other useful post please consider the use of buttons useful/correct to award points
Tags: VMware
Similar Questions
-
Officetjet 4215xi, Windows 7-64.
Try to use the original HP CD-ROM driver was unsuccessfil, message telling him did not meet the requirements. Then, I chose to install the driver directly from Windows 7.
After installing that shows to be successful (the impressions of the printer), I wanted to get the center of HP solutions on the computer and I downsloaded the driver, choose Officetjet 4210 (4215 wasn't a choice available).
It seems that the installation has been done, there is an icon on the desktop but when clincking it says that the printer is not connected.
I unplug the USB cable, restart the computer and replugged the USB at the back of the printer. No results.
How can I work around this problem. Thanks in advance.
Hello
The HP Officejet 4615xy is no longer included with the full functionality of feature for Windows 7.
Any driver you may have used is not intended for your printer and not detect...
You can find the information for your printer below:
http://support.HP.com/us-en/document/c01796879
I'm afraid that plenty of advanced features as the HP solution Center is not available for the operating system...
Shlomi
-
Portege A600-138 with Vista 32 bit does not see the computers in the Group Win XP network
Hello
My Toshiba Portege A600-138 with Vista Business 32 does not see the computers in the workgroup.
In our office, the computers are all equipped with Windows XP.When I connect my laptop to the Local network, I don't see any neighboring computers in Network Explorer.
I spent 1 hour and 40 minutes to talk to a specialist Service of Support from Microsoft, and the only way to have access to local machines, we found it had to enter the IP of the computer directly into the computer browser path field.I hope you understand what I mean.
The man said that he had no this problem with non - OEM Windows Vista versions.
He meant that the problem was with the oem versions of Vista preinstalled on laptops only.
He said that probably the sellers - in my particular case Toshiba - supplied their notebooks with VIsta oem images that were somehow corrupt.Does anyone have an idea of the cause of this problem?
> The man said that he had no this problem with non - OEM Windows Vista versions.
> It meant that the problem was with the oem versions of Vista preinstalled on laptops only.That's nonsense for me
The Vista OS preinstalled Toshiba which is same BONE as full Vista disc from Microsoft.
There is only one difference; Toshiba laptops are preinstalled with Toshiba and pilots tools and drivers and tools are part of the Toshiba recovery image that contains Vista, driver and toolsCheck this box:
http://www.Computerworld.com/s/article/9019179/Teach_XP_and_Vista_to_play_nice_on_networks?taxono myId = 16 & pageNumber = 1You will find information that a problem has to do with the new Windows Vista network map.
Windows Vista uses a new Protocol (Link Layer Topology Discovery).
LLTD is integrated with Windows Vista, this is why they appear correctly in the network map.
But the problem is that LLTD is not integrated with Windows XP, which is why they do not appear correctly.But you can fix the problem by downloading and installing the layer topology discovery responder.
Install it and your PC Windows XP will appear on the network map. -
Version 38.0.1 does not see the passwords stored in previous versions
Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.
Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.
-
Connected to but the Airport utility does not see the time capsules
Hi, I have several time capsules.
I can connect to the web, but the airport utility does not see the time capsules. I tried to restart the time capsules, router, computer, but I still don't see any of the devices on the network.
What now?
Have you tried the airport utility in the iOS version... Download on the App or iTunes store and load... Works better than the Mac version.
Other than what Mac running what OS do you use?
This modem you have and how is the installation of TC on the network.
-
Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?Do you use the original disc from Microsoft of Windows 8?
-
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
-
MAX does not see the devices and interfaces
Hello
Just got a laptop computer to support the lab and installed Labview. For reasons that I don't have understands THAT MAX does not see the com and USB ports in the laptop. The IT Department gacve my rights to admin ID. Any ideas what's happening?
Kind regards
Kaspar
Dennis, as usual, is correct. Please check if you have installed NI-VISA. There is an article in the knowledge base on the way in which com ports are not in MAX unless NI-VISA is installed. The link to this article is below.
http://digital.NI.com/public.nsf/allkb/1FAB687036A2D85B862571490072307A?OpenDocument
-
all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?
If I shut down the computer and plug... he sees the thing then turned back...I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.any thoughts?Hi KK Waddell.
Thanks for posting in the Microsoft Community.
I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.
Before you start the troubleshooting steps, I need the information required.
1 did you changes to the computer?
2 did you receive an error message?
I suggest you to check with the other USB port.
I suggest you to see the links and check.
USB port may stop working after you remove or insert a USB device
http://support.Microsoft.com/kb/817900
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
One or more USB devices may not work when you start your Windows XP-based computer
http://support.Microsoft.com/?kbid=885624
See also:
Hardware devices do not work or are not detected in Windows
-
Windows xp monitor does not display the background image
My windows xp screen does not show the background image. Started when I changed the photos there twice. Now, the background image is only 1/4 of the image on the left 1/4 of the screen. The rest is white for 3/4 on the right side.
Other images, all jpg files, are the same.
Hi edwardo418,
Check that your post office is set to stretch. Perform the following steps.
- Right-click on an empty space on the desktop.
- Select Properties.
- Select the Desktop tab
- Change the setting to Stretch under Position
- Click on apply
- Click OK
Let us know if that helps.
-
Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.
If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it
Unless you disable the AHCI in the BIOS. Or their wake.
Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.
-
Sansa clip + does not see the audio books I have loaded
I got my Sansa Clip MP3 player + for two years and it works very well, so far. I only use it for audio books. Recently, I reformatted the player and loaded new books in. When I went to read, the audio books folder was empty. I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.
I've updated the firmware to the V01.02.16A Version, and there was no change. I tried to reset by pressing the start button. No change.
Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the. What is going on?
That's all! I checked the format of audio files. It is the AAFC, with suffix .m4a.
The Sansa manual says:
"The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats. I guess that AAC is not one of the formats that they support. So I have to convert .m4a to .mp3. I guess there are a lot of tools to do it. Any suggestions about which one is the best?
Thanks a lot for this revelation.
-
HP Pavilion dv9000 - XP does not see the HARD drive, how to install it?
Hello
I try to install XP SP3 on HP Pavilion dv9000, but XP Setup does not see the hard drive.
Can you please point me in right direction - what I do files and how to add them to the XP SP3 installation CD necessary?
I guess that somewhere there is a step-by-step detailed guide.
Thank you
Enter the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.
If you do not have the setting in the Bios, it's the driver sata for your machine: -
system does not see the hard drives as P6000 Windows 7 Pro 64-bit
PC is a little more than a year. About 2 months after installation disk c crashed. Replaced HP drive.
Customer said that she had problems starting and kept restarting. He ran chkdsk and hooked up to 36%
Now the system does not see the drive, but he sees no RAM, etc.
Anyone know what causes this?
Can what information I give to help troubleshooting?
Thank you!
Hello:
Try resetting the CMOS.
If this does not work, I would say that the drive controller in the motherboard is dead.
Clearing CMOS -
laptop does not see the disk of works 9
I have works 9 and I want to install it on my HP laptop with windows vista home premium as a the opp system.
My laptop does not see the cd or one of its files... The packaging says it's compatible with windows vista.
It works on my desktop which has windows xp system opp on him.http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
For any problems with your computer, not reading CD, ask in the Forum Vista Hardware at the above address.
See you soon. Mick Murphy - Microsoft partner
Maybe you are looking for
-
I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?
-
What kind of Ram I can use for S2400-103. Right now I have 256 and go to 512? Thank you. James
-
Qosmio G30-162 - how to handle the dead battery?
I use my Qosmio G30 plugged into the mains. The battery is exhausted, and so I lost the use of the computer. What I need to replace the battery, or is there any method of conversion of the PC for network use only? All advice appreciated... Senior use
-
Import the SPICE model for transistor BJT BFP720F in Multisim
Hello I'm trying to get the SPICE model for the BFP720F transistor provided by Infineon to work in Multisim. I have attached the template as provided by the manufacturer. If I import it as-is, I get error messages "invalid node identifier ''" (I have
-
Office jet Pro 8630: printer storage for 18 months
We are about to travel for 18 months and want to store our printer then out. I have the original box and packaging ploystyrene, if you want some advice on reconditioning safely - I can find help for printers smaller, but not the 8630. Also, should