Inspiron one 2310 not start - 6 beeps

Similar Questions

• Dell inspiron 530 will not start 4 beeps power black monitor blue button solid yellow lite inside

  I HAV a dell inspiron 530 inter processor duel completely stock w vista... when I push the button to switch the fan to come on the button lights up blue then u hear 4 beeps and inside ther is a yellow solid lite on next to the motherboard no power to monitor usb black fan and s stays lite on the back is green as it should b what is problem It can b fixd can I solve this w taking some1 working inside a computer im alittle above a recruit n do thx mike

  maheisel

  Four "beeps", could indicate a memory problem, if you are comfortable working inside the computer, try to open the case, remove and reinstall all memory modules and see if that makes a difference.

  If you not comfortable working with the removal and the reinstallation of the components, then I suggest that you take the Inspiron 530 to a repairman.

  Is the power button LED, blue constant or flashing blue?

  Every change made to the 530 recently?

  The Inspiron 530 convenience store and the diagnosis Codes are HERE the ADMIN NOTE: broken link has been removed from this post by Dell >

  Bev.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• Inspiron 3737 does not start?

  Hello.

  Can Inspiron 3737 does not start. See the following video.

  Can you tell what happened to him?
  Computer configuration laptop manufacturer is unchanged.
  At first it was a problem some time and he started to run after 2-3 commissioning. The number of switches required for a departure then become higher. Now it does not start at all.

  Hello.

  I got sick.

  Here's the video I mentioned

  www.YouTube.com/watch

  Please help me to identify the problem.

• Inspiron 7537 do not start

  Hi my Inspiron 7537 do not start. No led no noise, nothing. Thanks for the support!

  Removing the battery:

  

• (Redirected) Dell Inspiron N5110 does not start

  Hi, my laptop Dell Inspiron N5110 is now 3 years old. I recently had a hard drive fail, then replaced by a new. Now the machine does not start. I have a boot disk in the DVD player that swirls, but gets no further. I get also is no longer the screen Dell displays (before the windows one). In fact, everything is empty. I tried to remove the power supply by battery pack and power holding down the button for 1 minute then re - again no difference. Is there anything else I can do or is the death machine?

  Thank you

  Daniel.

  Please repost this in the laptop computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Dell XPS 2710 all-in-One will not start, the totally blank screen

  Hello. This is my first post on the forums and I hope someone can help me.

  The Dell XPS 2710 all-in-one I bought for my 10 year old 15 months ago (Yes, that means that the guarantee is expired) will not start. No no post, no beeps, nothing. Just a brief spark of light on the screen, no words, nothing. The machine gets occasional use, and there is nothing to indicate what could have caused the problem. I have not upgraded the BIOS recently, is not as if it was a bad BIOS update, or whatever it is. I tried to hit the F1, F2, F12 keys delete during startup. No results.

  The video works. I know because I can connect my laptop to the HDMI-in port and I can see the desktop of my laptop very well. So the question is NOT the video. My son uses this machine for occasional movies and homework in his room. I want to fix the computer, if I can. I am handy with computers and built several machines from the outset in the past.

  I believe that the most likely scenario is that the motherboard has went wrong; There are several posts around the internet about motherboards 2710 AIO being unreliable. I saw an ad on the forums of Dell from a guy who said Dell Tech Support replaced its motherboard 2710 five times. I see that some of these motherboards are selling on eBay for around $200. I'm toying with the idea of getting a. I watched the service manual for the 2710 and I'm pretty confident that I could replace the Board of Directors.

  Someone had experience with permutation on their motherboard on a 2710 AIO? Or someone has any ideas on what could be the problem with my son's computer? I appreciate all the advice/help anyone could offer.

  OK, I have removed all the RAM from the motherboard (there were two sticks) and unplug the connector on the SATA hard drive. Then I turned on the machine and got two beeps very strong, but still no video on the screen indicating any form of activity of the POST. The sound signals have been first sounds I've ever heard during the procedure of boot on this machine. I put the RAM back in and re-connected the SATA cable. The way he has been, no video, no post, no beeps. I'm a bit at a loss for what I've decided, this means that the motherboard works technically and that another device on the machine is at the origin of the problem? Have I reason to assume that if I hear two beeps, then I should have the certainty that the motherboard was bad? Given that this a sound signal, the solution becomes cloudy, I guess. I can't help but feel that somehow the BIOS on the computer is damaged. Don't quite know how that could happen, however, because I have not updated the BIOS in over a year. I don't remember what BIOS version I have, but he had been working well for a year with no problems. Thanks for any other help/suggestions you can provide.

• Inspiron 1564 does not start

  Hi, yesterday an I tried to start this laptop and he has not started. Because it wasn't me the last who used, I don't know if it was too hot or if she switch off suddenly... my dad doesn't remember... xD

  Symptoms:

  The laptop turns on by AC or battery and: screen stays black. Fan starts to run as normally. HARD drive starts to spin at the first time but then it stop (so it doesn't load the operating system). Power led, hard drive and battery works as it should. DVD and usb also have the power.

  Remove one stick of RAM keeps the system as described above. When two slots are free the mobo make 2 beeps, so that it matches the RAM beep code not detected...

  Beeing, push the power button turns the phone off immediately.

  The problem would be that the two RAM sticks was bad? I thought to try with the stick of an another laptop but Im afraid to break a new too...

  Thanks for your response

  Hi Sunnytours, it seems that your motherboard is fine, the problem is that with the screen, maybe you should try pluggin a tv with a vga or hdmi cable.

  If so you see everything fine on the TV or monitor... just buy another screen and replace it yourself if you can, it's easier than you may think.

  Best regards

• Envy20 d030 than all in One does not start

  A week ago, after I downloaded Win 8.1, I received a notice about the HP updates.  I did the updates, but the next morning, the computer does not start and the ports or the CD player also would not work.  I tried F10 and F12 but got nothing.  I do not remember the specific message there was, but it would not move from the initial start-up phase.  I took it to a repair shop and they told me that the BIOS has been altered, as well as areas of the hard disk; the 4 MB of ram card was also burned (we had a lot of lightning, so I don't know if that had nothing to do with this and no more than technicians).  The MOBO extracted fine.  I replaced the hard drive and let the 2 MB of ram.  Everything seemed fine.

  Yesterday, I tried to replace the features and specifications of the factory.  I was last updated drivers and rebooted the computer to complete the installation of the system, but the computer wouldn't even start.  HP turns on but it then immediately goes to an error message "no boot disk was detected or the drive failed.  F10 and F12 nothing else that the CD player and the USB ports seem to be ok.  I remember that the updates was a BIOS.  When you perform this update there was a message to be formatted a sector of the hard disk (sector F) but has no so I cancelled it.

  Data sheet (current): Envy20 d030 Touch Smart All-In-one

  Windows 8.1

  64 bit

  2 MB of Ram

  1 TB harddrive

  I hope this is enough information for someone to help me.  My questions are; That's happened?  How can I solve this problem?  If I order a HP recovery package that will, as much as there is a new hard drive in the machine.

  I'm very frustrated about that.  Not only by problems and my loss of use of my computer, but also costs I hired.  I have had many computers and I'm pretty tech savvy but nothing like this has ever happened to me before.

  Thank you

  Pat - D

  Hello again Pat-D,

  The recovery disks will be won't on which hard drive you have installed. Your computer comes with a 1 to SATA HDD with a rotation speed of 7200 RPM. If you have another hard drive in there and recognize your computer, you should be good to go.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• (Redirected) Aurora will not start 5 beeps repeatedly sounds

  Hi guys,.

  I encountered a small problem, at startup, that my Alienware Aurora R4 does not start. The screen is often black and is never the whole part of BIOS and the computer gives 5 clear "beeps" followed by a short break. (This is repeated).

  I don't know what is the question, but I read that it was possibly due to a hardware failure or something. You guys could help me please? I'm going to the United States for a short time, so excuse me if I am not able to respond instantly.

  Best regards
  Marc

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• I have a Pavilion a6244n desktop computer. It does not, start just beeps long short 2 and 1. Beep codes HP

  identify the video card. He has a card of Nvidia GeForce 8300GS. Because I can not start the computer, can I safely replace the card with a GeForce 520 and will recognize it and start the computer? It is almost 5 years and I have already replaced the power supply. The computer worked very well all these years and think it can last from several others. Any suggestions? And thank you for taking the time to read this.

  I replaced the video card. New card is a GeForce GT 520 Galaxy. Everything is back to normal.

  Thanks for your advice.

• Inspiron 560 does not start after the new mobo

  just relpaced mobo with nine years of old stock that it does not start in windows 7, just goes into repair options, but will not repair.

  He's trying to start windows, it happens from windows, you see the glance just color logo on the screen, then it restarts.

  Yes, it's the same model mobo.

  TIA.

  Check the operating mode SATA for disks - it must be about the same as it was before the jury was replaced (AHCI, RAID, etc.).

  F2 at startup to check.

• Dell Inspiron 17R will not start

  Hey,.

  My Dell Inspiron 17R laptop 5720 was working fine until today, she won't start now. I had a virus, but Avira seemed to clean it properly, so I thought everything is ok now, but after restarting my laptop I didn't even have the "Dell" screen more. I've been Googling this topic for hours, but no one seems to have this kind of problem. Most of the users get stuck after the POST screen, but I don't yet get there. I just press the power button and that's it - laptop starts, but doesn't show anything. 1 out of 10 times, I managed to start and it works perfectly, even restart Windows it works then, but once disable us it probably will start again for the next 7-8 attempts.

  Things I've tried:

  -Remove the battery, hold the power button / stop for 60 seconds

  -In the course of running Dell Diagnostics (regular and thorough mode) test - it detects no error

  -Commissioning with or without battery

  -Flashing of BIOS (A14)

  -Reinstalling Windows, even tried Linux

  -Remove the strips of memory, trying to start with one stick (I had 2 x 4 GB) - will not change anything

  It looks like a problem that does occur from time to time. It is a hardware or a software problem? Is there anything else I should try before sending it for repair?

  Thanks in advance!

  Hi randomthings,

  I appreciate for all stages of misjudged shootings.

  I recommend you to disconnect all external devices. Turn on the system and check if there are codes of beeps at startup.

  Given that the system turns after several attempts, it may be due to poor nutrition or inadequate food, bad drive HARD or other hardware problem.

  A poor, distressed or inadequate diet is often the cause of this problem. If the hard disk does not have enough power during the first time the computer starts, it will not be able to spin the platters of hard drive fast enough to start the computer. However, if you restart the computer, two, three, or four times, because the platters spin already, he is able to get the drive to speed and able to boot from the disc. Try with an AC adapter / CC known good and control; If the problem continues, I suspect it is a HDD failure.

  Please, remove the HARD drive and turn on the system and check the status.

  Please find the manual for Inspiron 5720 in the following link:

  http://Dell.to/QhAcwN

  Come back to this post for further assistance.

• Satellite M40X-119 does not start - 4 beeps only

  Hello..

  I have Satellite M40X-119
  When I press the power button, the blue light comes on and the fan starts and then only 4 beeps
  (Beep - beep - beep - beep) intreval approximately 1 seconds. and then nothing happens!

  I replaced the RAM with a new one... but still the same

  any advise?

  Hello!

  As far as I know the Satellite M40X has a Phoenix BIOS.

  Phoenix BIOS, there is no code 1-1-1-1 (beep-beep-beep-beep).
  I think it is 1-1-2-1 or something else.
  Here is a list of the different beep codes:
  http://bioscentral.com/beepcodes/phoenixbeep.htm

  If you replaced the RAM, I think that there is something wrong with the CPU or the motherboard.

  Good bye

• Power supply problem with Dell Inspiron One 2310

  Hello

  I have a problem with my computer Dell 2310, as far as I can see that the power supply burned out or something similar. Blue bright lighting supply cable indicates that power delivery is correct, but the power light on the power button does not respond.

  I suspect that the power supply is blown and needs to be replaced, I hope that a replacement is available on the list of spare parts and hits on how to properly check if my preliminary diagnosis is correct. I see no reason to suspect problems with the other componentts such as motherboard, memory, disk HARD etc.

  Grateful for advice on how to check my diagnose some material.

  Kind regards

  Axel

  Hi Axel,

  Sorry, no one answered. This is a user forum. We organise warranty service. You should contact Dell technical support in your country.