Install New Modem/dongle

Similar Questions

• Install new modem, now that half of my favorites appear

  Original title: Favorites

  Had to install a new Modem and now only half of my "Favorites" appear.  How to recover the rest of the list?

  not sure why a modem is responsible, unless you are short of memory ram.

   

  in all cases, you should be able to find here: C:\Documents and Settings\ {username}-Favorites

   

  You can click on the links directly or you can try to reinstall your browser.

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "bstader" wrote in message news: 081 7805-fe22-44da-9694-eaa530beefb6 c...

  Had to install a new Modem and now only half of my "Favorites" appear.  How to recover the rest of the list?

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Install HP8600 offline after the new modem wi - fi

  I just installed new modem WiFi of Xfinity.  Two laptop computers and printer HP8600 are on the home network.  Both computers connect to internet just fine and a laptop prints to HP8600 well but other laptop displays printer offline and will not print.  Can anyone help? Thank you

  Danleyde,

  Welcome to the HP Forum.

  One of the things that you might try is to reinstall the software of complete functionality on the notebook where it does not work as expected - the installation process is smart enough and can sometimes clear up problems resulting from the change of equipment.

  Install the full features software - printer

  More detailed help is available for this kind of situation; Please look at the following suggestions:

  Replacement of your wireless router

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to reset AirPort Extreme 10.11.6 OS? How to work with this pinhole? I'm trying to get rid of this flashing yellow light, which began after I installed a new modem from Comcast.

  How to work with this pinhole?

  Usually a paperclip or toothpick or ball pen.

  Stick it in the hole and reset for about 10 seconds until the front led flashes quickly.

  How to reset AirPort Extreme 10.11.6 OS?

  The software method... Unlike the above material method... is to open airport utility and select restore default settings.

  

  Both methods take you to the same place.

  You can also read the manual...

  Reset to a base station AirPort FAQ - Apple Support

• installed a new modem router now I can't access my emails with my usual password.

  I have installed a new modem router, a Netgear D6300, now when I press the messages button get on my email account thunderbird, he invited my password which is normal. But when I enter my password that worked all the time it tells me that it is the incorrect user name or password. Of course, the implementation of my new router has changed something, please help.

  almost all Netgear routers have a firewall. Then log into the router. username Admin and password is probably password. If not these days they printed on the bottom of the router. Check the ports used for mail are not blocked.

• Cannon MG3150 won't print after installing the new modem from TalkTalk.

  Original title: Canon m.g.3150

  After new modem from talktalk, my printer does not work

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Disable new found material pop up - appears after installing a new modem from Verizon

  AFTER YOU HAVE INSTALLED A NEW MODEM FROM VERIZON WITH THEIR HELP, I HAVE NOW FOUND NEW HARDWARE POP UP WHENEVER I START MY COMPUTER.  I WENT INTO MY CONTROL PANEL AND UNDER DEVICE MANAGE DISABLED IT, BUT GO BACK TO A DEFAULT VALUE BECAUSE IT IS ONLY A TEMPORARY DIFFICULTY.  HOW CAN I GET RID OF THIS POP UP?

  I HAVE NOW THE NEW HARDWARE FOUND POP UP WHENEVER I START MY COMPUTER.

  Looks like his driver has been installed by the user instead of for all users, for example by an administrator?   (I don't remember if it is still a feature of the XP.)

  BTW, this is not the best forum to ask for help with hardware and boot, especially for an old OS problems.

  HTH

  Robert Aldwinckle
  ---

• Development in error "Installer.exe has stopped working" while installing the new modem.

  Development in error "Installer.exe has stopped working" while installing the new modem. I try to install the ZTE AC8710 modem on my 32-bit windows vista (home edition) system, but whenever the facility is subject to the full I get the error 'Installer.exe has stopped working' and complete Setup doen't. The same error is hit when I try to uninstall the ZTE modem that is installed intestinal. The installation file has CD/install drivers for windows vista. Information below is displayed in the application event viewer for this error log. Help, please

  Log name: Application

  Source: Application error

  Date: 2010-01-03 02:04:50

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: Monica-PC

  Description:

  Application Installer.exe, version 0.0.0.0, time stamp 0x4b208462, Installer.exe module, version 0.0.0.0, time stamp 0x4b208462, exception code 0 x 40000015, offset error 0x0002efec, 0xadc process id, failed failed application start 0x01cab8b5797299e1.

  The event XML:

  1000

  2

  100

  0 x 80000000000000

  309

  Application

  Monica-PC

  Installer.exe

  0.0.0.0

  4b 208462

  Installer.exe

  0.0.0.0

  4b 208462

  40000015

  0002efec

  ADC

  01cab8b5797299e1

  Hi Tonio saini,.

  Navigate to the location of the programs .exe file and right click on the .exe file, and then select run as administrator to install the modem.

  You can also check the following link, try the suggestions and check if that helps:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/4ce21286-3a77-4A06-923c-889d657f8e33

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot connect remotely via VPN since installing the new modem/router

  Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

  

  Hello Joanna,

  Here are the steps you need to do first:

  1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
  2. Check the IP address because obviously, that changed when you plugged into the router again.
  3. Updated to the latest firmware for the router and NIC.

  For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

  Let us know how it goes.

• Cannot install the Modem Satellite Pro A200 XP driver

  I'm a local network for Newbold College administrator. New mobile A200 and we need XP Pro on some of them. I tried to install the modem driver as one of the last drivers downloaded from the website of European support. I also tried the Canadian site as well.

  The driver installation program does not appear to do anything. I tried to manually install the driver for a Windows modem Agse/Toshiba software modem, but I have com port problems and I can not quire of the modem.

  Can someone help me please!

  Hello

  What to say; I checked the driver Toshiba Europe page and found all the drivers XP necessary and important for the Satellite Pro A200.

  Please note that the European driver Toshiba page provides drivers XP 3 different satellite Pro A200 series! There are PSAE1, PSAE4 and PSAE7 series.
  Please choose the right!

  In addition, you will find a txt file of installation instruction on the page of Tosh.
  In this file, you will find a good and important driver installation order! Please follow these steps!

  I put t know exactly why you get the modem com port problems but I guess a new installation of XP and the driver should fix this strange problem.

  Good luck

• DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

  I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

  I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

  Any other ideas?

  Thank you!

  Hi @newgranny,

  Thanks for getting back to me.

  It is good that the printer has been able to print a diagnostic page.

  Ensure that the router and firewall on the market do not block these ports.

  • About the application firewall

  Ports of printing:

  • UDP ports: 427, 137, 161
  • TCP port: 9100

  Card photo upload:

  • UDP ports: 137, 138, 427
  • TCP port: 139

  The HP device status:

  • UDP port: 161

  Ports of Web Services:

  • UDP and TCP: 80, 443, 5222 and 5223

  Hello Ports:

  • TCP and UDP: 5353 and 5297, 5298

  Unplug the wired network (ethernet cable), restore the default values on the printer.

  Restore the default settings.

  Follow these steps to reset the printer to factory default settings:

  1. check that the printer is on.

  2. press and hold down the button to report Page.

  3 while holding down three times the homepage button, press the Cancel button.

  4. release the report Page button.

  Source

  • Restart the printer.
  • Connect the ethernet cable.
  • What were the results?

  If the problem persists, try the USB connection.

  Please reply to this message with the results. Good luck!

• Why my pc will not install a modem broadband?

  I need help, try installing a modem up flow of cricket, the company couldn't help me more something wrong with my pc, when I connect the modem a yellow window appeared "new hardware detected", then it says that your hardware is installed and ready to use, but no icons, no software to not install, no internet, nothing... I should mention that I used this kind of modem before and I uninstalled the program, I check on "add or remove programs" is not there... what could be? It works perfectly on my sister's cell phone... is so on mine... What do I do? I have a windows xp service pck 3... Help me please!

  Rylie salvation,
   
  -What is the model number of your modem wide band?
   
  Check the device status in Device Manager
   
  To display information about a device driver
  a. click Start, click runand type devmgmt.msc and press ENTER to open the Device Manager.
   
  b. double-click the type of device that you want to display.
   
  c. right-click on the specific device and then click Properties.
   
  d. in the tab driver , click Driver Details.
   
  Check this link for more information:
   

  How to manage devices in Windows XP

  Keep me updated on the status of the issue.

• Windows crashes when I use the new modem.

  I just started using the new modem broadband model Maxis Huawei E1762. After some time using his accident from my window. Varies according to the duration before crashing immediately in a few hours. Help...

  Hi Azmahamd,

  The latest drivers for Windows Vista are installed? Visit the modem manufacturer to check if newer drivers are available, if they are then install them.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• New Modem caused my printer to stop working

  Recently I got a new modem installed and now I can't get my printer to work. I ran the troubleshooter and it still does not receive the signal from my wireless modem. How to reconnect the modem again? If I can't get the new modem to read my printer, I have to reconnect an old, but I would try to get the new one to work first.

  I should mention, too, that before the new modem installed, I had lost the ability to print from the internet (although I could still print documents from my computer). Now I can't even print documents from my computer. Any suggestions?

  Had the same problem when I got a new modem. Had to re - add the printer to the network.

  http://Windows.Microsoft.com/en-AU/Windows/install-printer#install-printer=Windows-7 n

• HP printer will not connect with the new modem

  I just installed a new modem which has replaced a router and a modem.   But now my Printer (Deskjet j310a) HP does not work.  The window of the poster printer 'Wireless is not connected' shows you settings button choice: Disable wireless. WPS; Default values.  I don't know what to do and would like to return printer.  And before I changed modem, there was a small symbol of bluetooth on the bottom of the screen and it is gone now.  Any ideas?

  Thank you.  I'll try that and I'll let you know if it works for me.