install RAM in HP Pavilion 15 - p055TX

Similar Questions

• Installing ram in hp Pavilion p017tu

  Hello everyone

  I have a computer hp p017tu laptop preinstalled with 4 GB of ram. I want to install more than 4 GB of ram. Could someone help with procedures to enter the slot of ram on this laptop?

  Suv96 wrote:

  Hello everyone

  I have a computer hp p017tu laptop preinstalled with 4 GB of ram. I want to install more than 4 GB of ram. Could someone help with procedures to enter the slot of ram on this laptop?

  Through this Manual by Page 3, 116, 117

  You need to mother pto major dismantling to do this, contact nearby guys tech or HP

  Concerning

  Visruth

• HP p6245d gives error beeps after installing RAM

  My HP Pavilion p6245d desktop computer that has a motherboard of Foxconn H-I41-Μatx gives an error beep code of a short and a long beep after that I installed a 2 GB 1333 MHz DDR3 DIMM on it. The code of the RAM is KVR1333D3S8N9 / 2G, manufactured by Kingston. My system has a 2 GB installed RAM origin, but I would like to install an another 2 GB as it says that the motherboard can support up to 4 GB of RAM. I tried to clean the slots, reseatting RAM, reset the CMOS, etc., but not from their work. I also checked through the internet and I found out there a lot of people have the same problem. Hope someone can help on this issue. Thank you!

  P/S: Operating system is Windows 7 Ultimate 32 bit.

  Hello..
  I would like to ask you something.
  
  The motherboard gives you a beep sounds when the original RAM is installed on the other slot?
  
  If your answer is Yes, then the slot is faulty.
  
  It has only two instances when your PC gives you a beep sounds when the memory stick is plugged.
  
  1. when the memory stick (live RAM) is defective.
  2. his slot memory on the motherboard that is defective.
  
  Find a stick of memory work on all locations on the motherboard. And mark that on which working memory is to give tone to the PC.
  
  It would prove the functionality of your memory locations.
  
  If you have any other questions or if this does not correct the problem, ANSWER.

• computer laptop dv6-612tx of hppavilion: size of the installed ram

  I am Agnes... .i am using a computer hp pavilion dv6-612tx laptop... I have a size of ram of 4 GB of origin with the product... but today, recently I gave the lappy to a store aimed a cleaning after I got my lappy when I see the system information in my computer that I could see that the installed ram is 2.45 only...? My question is will show 4 GB ram ram of 4 GB installed or 2.45 only? Please tell me quickly

  Hello @Hemanth17,

  Welcome to the HP Forums!

  I read your post about the size of the memory installed showing incorrectly on your dv6612tx Pavilion laptop and wanted to reach out to you.

  At the right amount showing before you had the system cleaned? What's the memory installed value that is incorrect or available memory?

  If the system displays 4GB but 2.54 GB usable, the system recognizes that the memory is installed, but retains little memory for the physical operations.

  It is possible that the maximum memory is enabled. To change this, you need to go into the System Setup and check the Advanced tab startup options.

  You can also try the tests for a hardware problem or remove and reinstall the memory using the procedure described in the Service Manual (page 53) If you feel that there is a problem of physics with the memory.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• How to install XP on HP Pavilion DV2710US... Please help me

  Hi all!

  I tried to install Windows XP on my laptop HP Pavilion DV2710US but no success.

  Please help me, how to install XP on HP Pavilion DV2710US.

  Thank you all

  HP Pavilion DV2710US

  -

  CPU AMD Turion 64 X 2 Dual-Core Mobile Technology TL - 60 2x2.0ghz
  (2 x 512 KB of cache L2, 1600 Mhz FSB)

  -

  RAM 2048 MB - up to 4096 MB

  -

  HARD drive 160 GB SATA 5400 RPM

  -

  LCD display 14.1 "WXGA high definition BrightView Widescreen Display (1280 x 800)

  -

  VGA nVIDIA GeForce 7150 M - up to 799 MB

  -

  Optics: Support of X drive with Double layer LightScribe Super Multi 8

  -
  -

  3 x USB 2.0, VGA, TV, RJ-11, RJ-45, IEEE 1394 firewire (4-pin) out
  Camera + microphone Built in

  -

  "Dimensions: 13,15" (L) x 9.33 "(W) x 1.02" (min H) 1.54 "(maximum H)"

  -

  Weight: 2.0 Kg

  -

  PIN: 6cel Li-ion

  -

  56K modem, NETWORK card

  -

  Intel 802.11abg wireless

  -

  OS Windows Vista Edition Home Premium

  Message edited by hoannh on 06/09/2009 09:16

  Dear Alex!

  It comes from overheating while using Vista. But no self closed.

  How to try to use the cooling package when installing XP.

  Currently I use XP SP2 CD to install. What version of MS for DV2710U? (SP1, SP2, SP3)

  Thank you for your support

• HP Pavilion dv6 Notebook PC: maximum supported RAM to HP Pavilion dv6 Notebook PC

  Hello

  I wonder about how much ram can support my pavilion dv6 because I want to upgrade the RAM.

  The specifications are the following:

  Product name - HP Pavilion dv6 Notebook PC

  Number of product-XV699PA #ACJ

  Processor - Intel Core i5 CPU M 460 @ 2.53 GHz

  The operating system Microsoft Windows 10 Home 64-bit

  Motherboard / Motherboard-144 has 65,38

  Current installed ram - 4 GB (2 x 2 GB)

  Chart AMD Mobility Radeon HD 5000 Series

  Can anyone tell me about how much RAM my laptops support?

  Kind regards

  Otmane

  Hello

  Your computer is a HP Pavilion dv6-3123tx. It supports 8 GB RAM max from the #2 of the Service Guide and Maintenance page:

  Two SODIMM slots for customer-accessible/extendable
  DDR3 PC3-10600 1333 MHz memory
  Supports dual channel
  DDR3/1333 MHz and DDR3/1066 MHz (only computer models equipped with the Intel Core i7-840QM 1.86 GHz processor, the Intel Core i7-820QM processor, the Intel Core i7-740QM 1.73 GHz processor 1.73GHz the processor 1 .6GHz Intel Core i7-720QM to DDR3/1333 MHz and all other computer models to / DDR3 1066 MHz)
  Supports up to 8 GB of memory system in the following configurations:
  Total system memory to 1024 MB (1024 MB x 1)
  Total system memory of 2048 MB (1024 MB x 2, dual-channel)
  Total system memory of 2048 MB (2048 MB x 1)
  Total system memory of 3072 MB (1024 MB x 1 + 2048 MB x 1)
  Total system memory of 4096 MB (2048 MB x 2, dual-channel)
  System memory total 6144 MB (2048 MB x 1 + 4096 MB x 1)
  Total system memory of 8192 MB (4096 MB x 2, dual-channel)

  Source: Manual 1 from the following link:

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/4247579/model/4339853/manuals

  Kind regards.

• How to install RAM

  Hello

  I have a HP Pavilion elegant book 14 b 010 - we and it came with 4 GB of ram expandable to 8 GB. I have a new ram of 4 GB ready to install, but the back of the computer does not come off. For theis particular model, you know how to install RAM?

  Hi g3,.

  Rats.  If you can get your laptop to a local repair shop, ask how much it will cost you for having done that.

  Be aware of your warranty. do not take the computer in an authorized shop.  The procedure is simple for a trained technician to do this kind of thing, and the cost should not be prohibitive.

  Compare the benefits that you will get the upgrade against a time cost to achieve.

  For more security, have backups of your data to an external source before doing anything of this nature, if you do the work yourself OR you send/take the system to someone else.

  If you have not done your recovery disc, it would be a great time to do so!

  Creation of recovery disks or saving a recovery Image on a USB drive (Windows 8)

  HP - backup of your files (Windows 8) computers

  Good luck!

• How much is the max RAM on my Pavilion dv600?

  Hi, what is the max RAM on my pavilion dv6000?  is the dv6308nr, it has vista-32 bits, but I want to move to 7-64 bit, thanks a lot. Hugo

  Hello:

  .. .and make sure that if you want to update the BIOS, do it before installing W7, or you will be brick the phone if you Flash the BIOS thereafter.

  Everyone sees this release note, after they install Windows 7, and they Flash BIOS.

  System requirements:		Operating systems Microsoft Windows XP Home Edition Microsoft Windows XP Media Center Edition Microsoft Windows XP Professional Microsoft Windows Vista Home Basic 32 Edition Microsoft Windows Vista Home Premium 32 Edition Microsoft Windows Vista Home Basic 64 edition Microsoft Windows Vista Home Premium 64 edition
  Exit the:		2010-04-06
  Version:		F.43
  Compatibility:		Microsoft Windows Vista, Microsoft Windows Vista (64-bit), Microsoft Windows XP
  Fix/development:		-Fixes an issue where a message that says to replace the battery is incorrectly displayed when upgrading the operating system to a Microsoft Windows 7 operating system.

  The good news is someone who is flashing the BIOS on a dv6000 and dv9000 notebook after installation of windows 7 doesn't have to worry about the problem of fake battery error more.

  The bad news is that they need a new notebook PC.

  Paul

• Pavilion x 360-13-s102tu: how upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and what ram module supports this laptop?

  Hello, can someone help me to upgrade ram on HP Pavilion x 360-computer laptop 13-s102tu and also if anyone is familiar with how many slots there and what ram module supports this laptop?

  Hello

  Please use the part number and procedure on page 38 of the following guide:

  http://h10032.www1.HP.com/CTG/manual/c04825536.PDF

  (Note: same procedure for s1xx machines).

  Kind regards.

• What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234

  What ieee 1394 pci card Fireware should I install to my hp pavilion h8 1234?  I need to run a Nikon Super Coolscan 8000 Ed currently using Windows 7.

  Thank you

  2Wander

  A PCI Express x 1 card that is compatible with the operating system installed. You can find one at NewEgg.com or another provider online. Use Google or Bing to find the one you need.

• Upgrade RAM on HP Pavilion?

  I was wondering what kind of RAM I should get for my HP Pavilion g6.

  Should I still take the RAM if there is a way? Or should I just not. I have 4 GB of RAM on my Pavilion.

  -Sacred

  G6-1D01DX.

  Here is a 8 GB kit that will work very well for you:

  http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=756A8B9FA5CA7304

  • Package: 204 pins SODIMM
  • Function: DDR3 PC3-10600
  • Specifications: DDR3 PC3-10600 • CL = 9 • unbuffered • NON-ECC DDR3-1333 • 1.35v 512Meg x 64 • •

  For most computer users, 4 GB is a lot but 8 GB seems to be the new sweet spot, that everybody wants and power users have 16.

• Pre-installed RAM in a R60

  I bought my R60 about two years, with 1 GB of pre-installed RAM. Is there a way to check how much RAM is in each Bay without opening the device? (i.e. 512MBx2, one in each 1 GB, with an open Bay or Bay;)

  Well, you really don't fix the RAM sticks... just replace them.

  Even though I already know that some people would disagree... but that's how this issue is treated in most cases.

  I hope this helps.

• I installed RAM from 1 GB to 8 properties but system says 3.5 GB.

  I have a xw4400 workstation HP with Windows XP and I installed RAM from 1 GB to 8 but properties system indicates 3.5 GB. Why do we say not that there are 8GB?

  If you are running win XP 32-bit, it cannot "see" more than 4 GB, your video card is to eat the rest.  Only way to use the 8 GB is upgraded to 64 - bit
  
  If you have 64-bit check the setting of memory max msconfig.sys (not sure if it is called the same in XP, I used it for a decade)

• Installed RAM 16 GB, only 4 GB in BIOS - Precision T5400

  Hi all

  I'm at the end of the roll, trying to make the best of my memory upgrade.

  I am running Windows7 64-bit on Dell Precision T5400 single quad-core Intel Xeon E5405. Card mother 0RW203. BIOS version A11

  Has obtained eight identical sticks of 2 GB of ram (for a total of 16GB) and installed on all the places available. Noticed on the properties of Windows - installed RAM 16 GB (4 GB usable). Tried to play with the allocations of virtual memory, but without success.

  BIOS enabled and it showed all 8 locations occupied with 2 GB of ram, but the installed memory is 4 GB. Don't see any options for tweaking the settings of the BIOS for it to recognize all of the 16 GB of ram.

  Checked each stick individually and all play nice and the CPU - Z reports installed as well, removing the issue of housing or the motherboard. I suspect that it is a BIOS problem, and I would be grateful to anyone who can suggest a solution.

  I'll be happy to provide the additional information requested. I inherited the machine, so RMA and returns are out of the question.

  Ok

  Here is a temporary workaround

  on my example

  Initially, I had installed 4 GB / 4x1Go in slots 1-4 (white)

  I wanted to move to 16GB / 8x2Go

  And obviously had a same problem as the topic starter

  But I managed to work the memory following the path:

  1. Install memory old back and let the bios not recognize
  2. restart and shut down pc
  3. install the new memory (16 GB / 8X2Go)
  4. After turning on, you will see the message "memory size has changed.
  5. strike the F1 to continue and just forget about the existance of the BIOS, because as soon as you go, chances are that your memory will be reduced

  Clearly, this is a bug in the BIOS.

  I use A11.

  For DELL it would be really good remedy finally

• How to open the Pavilion g6-2210us laptop computer to install RAM?

  I have a HP Pavilion g6-2210us laptop PC running Windows 8.  He came with the bar of 1 to 4 GB memory and has a foul slot up to 4 GB of RAM.  I bought another 4 GB module and intended to install today, but I don't know how to open the bottom of the computer to install the RAM.

  I have a Compaq laptop that was new in July 2007 and he has a sign on the bottom that covers the compartment memory and a separate panel that covers the hard drive.  Each of these panels can be removed by loosening a few screws and pulling the top of the Panel.

  But with this new HP Pavillion-2210us g6, I see a big sign which applies to sites of memory and hard drive.  And there is only one screw.  Everything simply loosen this screw does not allow the Panel to be raised.  So I suspect the slides Panel stop someway.   Can someone explain how the Panel is removed?

  Hello

  See Page 49 of your & Maintenance Guide.

  Kind regards

  DP - K