Cannot re - install the multimedia center for think offerings

Similar Questions

• Cannot install the Solution Center for HP Photosmart C4780 in win 8.1 64 bit

  When I tried to install the full software from HP, the installantion hung an i had to stop. Since then, I get a runtime error:

  Program: C:\Users\(my username)\AppData\Local\Temp\7zS0615\Setup.exe

  This application has requested the execution to terminate in an unusual way.

  For more information, contact the application support team.

  I contacted HP support and the technology has been able to help me to install the base of the printer driver, but I can't use the complete featers (scan, for example).
  I tried to use the HP Installer on site, he acknowledged the printer in my network (wifi) and indicated that there was a prolem and I needed to install the complete software, he then download s/w but to try to run it, I got the same error again once. Help someone?

  Thank you!

  Hello

  Try the steps below to uninstall the existing entries to printer and software.

  Note: Make sure that the printer is not connected to the PC by USB.

  1. Press Win + R to open a window to RUN.
  2. in the window RUN, type %temp%
  3. Opens a window of time, and you will see a list of file names starting with 7z...
  4. Open who has the printer name in it, and then look for the name of the folder UTIL > CCC,
  5. then search for uninstall L3.bat and double-click it to run it.

  Once the uninstall is complete, reboot the PC.

  Now run the HP printer Installation Wizard to install the printer s/w.

• HP Laserjet 4350dtn-can not find the driver or install the right driver for Window 7 Pro or Windows XP Pro

  I was able to use a network 4250dtn printer, but can not connect another 4350dtn to computers with Windows 7 Pro or Windows XP Pro.

  I bought a new Lenovo desktop computer and it cannot find/install the correct driver for this printer refurbished.

  Help, please. Thank you. The Hoang

  Hello

  It's correspondence, that HP has HP Laserjet 4350dtn

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=412170&lang=en&lang=en&cc=us&cc=us

  See you soon.

• Cannot install the Solution Center in Windows 7 for HP7310

  I have a HP7310xi AIO that works very well until recently.  I've recently updated Win/XP to Win 7 32 bit and the printer software will not be installed correctly.  I downloaded and tried all the diagnostic tools that I can find on this site, nothing helps.  I can print but cannot scan due to lack of Solution Center software.  I want this to be a device connected to the network and part works very well with the printer, but I repeat, it will be no scanner - is network or USB accessory.

  I downloaded (several times) the file of the AIO_CDB_Net_Full_Win_WW_130_141 software, which is supposed to install the necessary software, but IS NOT INSTALL the Solution Center.  I tried HPPIW for installation and also HPHNDU and HPPDU for the diagnosis of the printer, and who work very well.  I also tried HPPSdr (who works for the printer, but not scan) and HPSDU, which does not at all.

  I still have my original installation CD and I tried, but of course it does not work with Win 7.  I also tried to uninstall the entire software package and then try to re - install, also without success.  It seems that the uninstall process is incomplete, or at least that's my guess.  I tried running also uninstall batch since the original installation CD files (the files to \util\CCC\Uninstall, Uninstall_L1, etc.) and they seem to work, but still the re - install subsequent does not install Solution Center.

  I recently ordered the customers a new installation CD, expecting a full installation CD for Windows 7 and receive.  The label of the CD says it's for "HP Officejet 6300, 7200, 7300 all-in-One-series", and also that it is "Version 13.1.0" and "Windows 7" and "Multiple languages"  It is the number of piece CB744-10003 and seems to be exactly what I need.  HOWEVER... This is ACTUALLY ON THE CD!

  Usefully, the label gives the following instructions:

  Insert the CD in your CDROM drive

  All Windows operating systems:

  (a) click on 'Start' in the task bar, then click on 'run '.

  b} type d:\Setup and click OK (where "d" is your CD drive letter"

  This is exactly what I expected to see on an installation CD; BUT there is NO "SETUP" FROM THE CD FILE!

  The content of the CD is exactly TWO FILES:

  AIO_CDB_Net_Full_Win_WW_130_141.exe, and

  AIO_CDB_Net_Full_Win_WW_130_141.MD5

  The first file is the same as I've downloaded several times on your website and many, tried several times to install.

  THIS CD DOES NOT CONTAIN WHAT THE LABEL SAYS WHAT IT SHOULD CONTAIN.

  I spent a lot of time on the phone with 'Technical Support' (telephone number 1-800-474-6836) and just got a huge evasive.  The best suggestion they could offer was that I should 'upgrade' my printer!  I know the printer is old, and I know that the printer itself is not supported.  However, I expect better than that of a software package that is supposed to take care this device on Windows 7 AIO.

  If I can't get this resolved successfully, I'll upgrade my AIO - but it WILL NOT BE ONE OTHER DEVICE HP!

  Hmm...  I have an Officejet 7410 similar, I used the same configuration file to install and have used it for a few years on my Windows 7 system.  A few questions:

  You have the printer connected by USB or network?

  You said that you had upgraded to Windows XP.  Was this a clean install on the XP machine?

  Are there any error messages during installation?

  There are a few things to try: If the printer is connected with USB, unplug it before you continue.  Navigate to the folder folder (open the Explorer and folder type in the address bar), look for a directory starting with 7z and a date corresponding to when you tried to install the printer.  Go to the util/ccc directory in the 7z... directory and run uninstall_L3, uninstall_L2, and uninstall_L1 files.  (This is the program of uninstalling the version of Windows 7, it might be more effective than the XP uninstall program).  After you run each file three batch restart the computer and log in as a user with administrator privileges.  At this point, run the Setup program.

• Windows 7 Enterprise N - cannot install the Media feature for 64 - bit Pack

  I tried to install the package of multimedia features for Windows 7 N, but it keeps saying that it is not applicable to your computer.  Why?  I search high and low and cannot find an answer.  I tried to download windows media player, but I can't find a version for Windows 7.  More something what I don't have IIS 7.0.  Whatever it may be.

  Can anyone provide steps to help me install the 7 business N Windows Media feature pack?  Service Pack 1 is already installed and updates are all up to date.

  Download x 86 Edition-> Windows6. 1 - KB968211 - x 86 - RefreshPkg.msu
  Download x 64 Edition-> Windows6. 1 - KB968211 - x 64 - RefreshPkg.msu

  Make sure you try to download and install the version appropriate for your operating system.

• Satellite A50-109: cannot install the latest driver for card ghraphic

  Hello

  When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
  THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
  Please help me
  my graphics card: Intel 82852/82855 GM/graphics controller GME

  Please help me

  Hi Milad,
  Did you get the new driver from the web site of Toshiba or others.

  The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

  HTH

• I installed iLivid and now FoxTab media but cannot listen to the live football for a reason any.

  Need help with streaming pls

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  I installed iLivid and now FoxTab media but cannot listen to the live football for a reason, get really really bored, I wud appreciate all help pls, thanx

  Hello

  You must contact that third party software developers and check for known issues or updates for compatibility to the version of Windows you are using.

  Concerning

• Satellite M60: cannot install the latest driver for my graphics card

  Can not install the latest driver for my graphics card
  Satellite M60
  GRAPHICS ATI MOBILITY RADEON X 700

  Hello

  First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

  Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

  When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

  I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

  Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

• Impossible to install the audio driver for Vista for Satellite M100-152

  Hi people,

  I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFile Realtek HD Audio.
  Sound works when headphones are connected but no sound to the speakers.

  Someone at - it an idea?

  Best regards
  Hannes

  Post edited by: hannesgpunkt

  Post edited by: hannesgpunkt

  Hello

  where did you downloaded the driver? On the toshiba Web site? Maybe you should try the driver from realtek home page because they are native and absolutely clear things from other manufacturers. I think you should try "www.realtek.com" and install the driver downloaded from there, once you have uninstalled the driver for your machine.

  Welcome them

• Problems to install the Solution Center

  HP Photosmart C6380, later Center of HP solutions web site lists as compatible Windows 8.1.

  408 PS_AIO_4_C6380_NET_FULL_WIN_WW_140_: this file will not be installed Solution Center, only drivers, even though it claims to have installed all the software.

  Is there a way I can get the software suite to a .iso file so I can burn my own installation disc? Then I might be able to navigate the disc and try to install the Solution Center in itself.

  Thank you

  Dave

  Hi Dave49,

  I'm sorry to hear that the final stages has not solved the problem. The next step would be to complete an uninstall of level 3. I've included the steps below for you.

  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  4. open the file 7z
  5 open the util folder
  6 open the folder of the ccc
  7. double-click on the Uninstall_L3

  Once the uninstall is complete, you will need to empty the temp folder. To do this simply follow the steps,
  1. press the Windows key and the letter R
  2. tap folder
  3. press enter or click OK
  Once you are in the temp folder, you can remove all entries listed. Note that not all entries will be deleted, because some programs are open. For these entries, you can click on ignore. Next, you need to empty the trash. After the Recycle Bin has been emptied, you will have to perform a clean boot. I've included the document "How to perform a boot in Windows". If your computer does not request it, restart your computer.

  Once restart is completed, you will need to download and install the software again. I have included a link to the ' all-in-one HP Photosmart C6300/6324 Printer series full feature software and driver '.

  Please let me know if you are successfully able to install all software.

• Install the Runtime Error for ATK Hotkey driver drivers for SL500 on Windows 7

  Hello

  I recently installed Windows 7 on a new hard drive and had a few devices not recognized in Device Manager that ThinkVantage Toolbox also could not solve. Now I am manually install these device drivers and have a few problems.

  (1) the shortcut keys (key from Lenovo, volume up/down, mute) do not work.

  (2) for the power manager battery indicator displays "Battery not installed" rather than the remaining battery time.

  (3) install the device driver for ATK Hotkeys gives a runtime error.

  (4) the Device Manager still contains a device that is not recognized and cannot install the drivers for.

  I tried almost all combinations of installation/uninstallation of different drivers, even the drivers beta, keyboard shortcuts, Manager of power, ATK hotkeys, etc, but can't get the drivers to install correctly. I have even the old drivers for my old installation, which at least gives me a scenario where I can get the battery indicator to work, still generates an error whenever I start up Windows associated with "ACPI ATK0100". I can go back to the State where the error goes away, but then the battery indicator stops working, by uninstalling the Lenovo_ATK_Package.

  Again, this is a new installation with a big mess of 8 hours of installation/uninstallation of drivers. Anyone have any ideas?

  Hi and welcome to the forum!

  You can post links to the drivers you have tried or installed on your SL500? e.g. Hotkey, ATK, and Power Manager?

  Try the following drivers: -.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-74261

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4GXPEG

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70024

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-70478

  Be sure to install the C:\Driver\ driver... If necessary, reboot the system after installation.

  It will be useful.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

  I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
  I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

  Hello

  You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

  Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
  Sat Pro L10
  Satellite L10
  Satellite A50 and A80 (6.14.10.3943)

  Good bye

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor