install windows 7 on pavilion g6 2346-nr

Similar Questions

• Desktop HP Pavilion p6310y: need standalone Serial ATA Drivers to install Windows Vista on Pavilion p6310y

  I bought your desktop Pavilion p6310y on eBay, and I really like it. I installed Windows 7 Ultimate on it without problem. For the purposes of running the software (in particular, Microsoft Virtual PC 2007), I also want to install Windows Vista Ultimate on it, on another partition.

  I was under the impression that Windows Vista Home Premium 64 - Bit was originally installed the operating system when this system was released, however, when I start the installation support Windows Vista (which I created from a downloaded ISO), it requires additional drivers (no doubt, Serial ATA drivers) before instalatio, also no hard drives appear in the drive list. Anyone know where I can get these independent Serial ATA driver files? The controller is a NVIDIA nForce Serial ATA controller. I do not have the recovery of original installation disks and don't think that it would be possible to get to this point, this system is no longer supported by HP.

  Any help would be appreciated. TIA.

  Mark W. Stroberg

  Hi, Mark:

  I compressed upwards and tied the driver for the sata raid controller, you require to the nvidia chipset, that your PC has below.

  The best way to install the driver is as follows...

  Extract (copy) the files on a USB FlashDrive without any folder.

  With the flash player and the support of Vista installation in the machine, boot from the Vista installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that Vista will install.

• Install Windows 7 on Pavilion dv6000

  I have a HP Pavilion dv6000 laptop with a hard drive is partitioned.  A partition contains the recovery program, which will install Windows XP should I ever need to do.  I recently installed Windows 7 on the other partition and think it would be wise to install Windows 7 on the recovery partition, whereas if it is still necessary, it would be to reinstall Windows 7 rather than Windows XP.  How can I accomplish this?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  You cannot create a Windows 7 recovery partition. The HP Recovery provided on your computer partition is specific to the operating system that is installed at the factory and the original software. The only way to reinstall Windows 7 is to use the same Windows 7 installation media and key you used this time. You can also create a backup Image of the system Windows on an external hard drive and the recovery of the computer at this point, if you ever have a problem.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• How to install windows 7 HP Pavilion

  I want to buy HP Pavilion laptop 15-E015TX (3rd Gen Ci5 / 4 GB/1 TB / Win8 / 1 GB graphics).

  I want to know that can I install windows 7 on it...

  You can install Windows 7 on your system. I gathered the necessary drivers to this unit, which can be downloaded from the following link:

  FTP://Win7:9RO * [email protected]/Notebook/Woody%201.1.zip

  The size of this download would be about 1.7 GB.

  If you still need the missing drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

  I searched on the web, without success, to find how to solve this problem.

  I recently installed Windows 7, 32 bit, on laptop HP Pavilion dv6748us to my wife. Now its internal microphone does not work.

  Have got some advice "roadside" use a Windows Vista driver; Have no idea what is the driver or how to get it.

  Have found information about uninstalling driver realtek audio and reinstall an earlier version; Have no idea about it no more.

  Would appreciate an answer with a positive result.

  Thanks for any help.

  Hello:

  Looking at your system information, you may have one of two possible audio cards:

  Conexant HD audio or the RealTek HD Audio

  The fact that you could not install the RealTek HD audio driver tells me that you don't have a sound card RealTek. Check your device manager and look at your sound card and check what sound card you have.

  Here are the Vista 32 bit driver for the Conexant sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-63949-1

  Here are the Vista 32 bit driver for the Realtek sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-59516-1

  If you have the Realtek audio card, I would download and install the driver of more recent, HD directly from RealTek site:

  Accept the agreement, download and install one on the list. Maybe it has been updated to solve the problem you are experiencing.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• Cannot install windows 8 on Pavilion Elite M9600T (KX745AV-ABA) with Vista 64 BIT

  I can't install windows 8 on my computer. I contacted Microsoft and he has worked for three hours and said I had a problem of graphics card driver. I use a Nvidia GeForce 9800GT, which came with the computer.  When I try to upgrade to the latest driver (306.97) located on the Microsoft Update site and also on the Nvidia site, the screen says no signal and falls asleep. I worked with a rep from Nvidia for a week now and he says this isn't their driver that is causing the problem and I have to contact HP. I don't know what else to do. I deleted the working driver Nvidia (SP41066) also and tried to install windows 8 and received the same message "Windows installation was not successful" and me back to Vista 64-bit. I don't know what else to do. Can someone please, or am I just out of luck. Thank you

  Gene

  I changed the graphics card to a GeForce GT 630 and that solved the problem. Thanks for your help

  This could be closed on 23/04/2014

• Install Windows 7 on Pavilion 500-297C

  Hello, I tried to install Windows 7 on my Pavillion 500-297C.  In the first screen to select Select language setting, time and keyboard, keyboard and mouse do not work.  Is that the problem of no drivers for the keyboard and mouse?  I thought in General, Windows Setup supports the generic keyboard and mouse.  Is - this particular to HP PC?  Thanks for your help to help me diagnose the problem and direct me to where I can get the driver for keyboard and mouse.

  HP provides drivers 64-bit of Windows 7 If you want to install first, but if they will work for the Windows 7 install, I'm not sure.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=6743755

  Why the keyboard and mouse are not recognized on installing Wiin 7 is a mystery.

  You may need to get help from HP technical support.

• problem installing Windows on HP Pavilion m 8070uk

  Hi I have a HP Pavilion m 8070uk with windows vista home premium, service Pack2, 32 bit, when I try to install a new program I get (the windows can not access the service install) my computer came with windows pre-installed vista, any help would be much appreciated, please note that I am no computer expert. Thank you, kev.

  First check if it is available in the services. Go to the start menu and type services.msc. If she is not there, chances are it also went in the registry. You will then use another computer with the same Windows Vista to get the file.

  On the other computer Windows Vista:

  1. go to start and type regedit and press to enter.

  2. in the registry editor, navigate to HKLM\SYSTEM\CurrentControlSet\services\msiserver. Right-click on the msiserver and then choose on export and then save it. It will be saved as a .reg file

  3. move the file using a reader flash or any other removable media to your computer.

  On your computer:

  1. double-click on the file.

  2. click on Yes to the next prompt.

  3. try to reinstall.

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Installed Windows 7 on HP Pavilion 23 AIO - Wireless does not

  Hi, I installed windows 7 to replace the 8 windows pre installed on my hp pavilion 23 aio PC and network drivers came out. I managed to get lan to work by getting drivers Realtek RTL811F downloaded and installed from usb, but the wireless won't come back

  Anyone know how I can make it work?

  In the Panel, there are several troubled devices - network controller, peripheral pci, pci simple communication controller, sm bus controller and bus unciversal controller

  Hello:

  The drivers of motherboard of this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5265168

  The specific drivers you need are:

  SMBus:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106361-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  USB:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106744-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-116781-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Try this driver for the wireless card. (The page on record your model does not show that it comes with the wireless network card).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106131-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  If this driver does not work, click on the network controller and view the ID of the hardware for it.

  Who can tell me what model wireless card it is, and I can post the link for the driver you need.

  If you don't know where to find the hardware ID, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• HP keyboard mapping inorrect freshly installed Windows 7 / XP on HP Pavilion 500-202eo

  Hello

  After you have installed Windows 7 Ultimate on HP Pavilion 500 - 202eo, I noticed that the HP keyboard connected is incorrectly mapped. I had exact same questions with the mapping of the keyboard with new operating system installs on oher systems as well, but couldn't really find a solution for this. In fact, certain symbols appear to move; While normally, where usually I had to press Alt Gr + 2 I got the sign @, I must now press shift. The? + button now product - character, while pressing on - product button /, <>product button------etc. I tried to put the keyboard in 'Norwegian', which is the layout of my keyboard, but nothing helped. It seems that I must be missing some type of a pilot or a patch, which is present on each preinstalled system that I own, but somehow is missing on installed fresh, even if there are no conflicts in Device Manager. I have the same problem on the XP installation. Any suggestions?

  Hello again once, I managed to solve this problem by specifying the correct keyboard language in Control Panel. I didn't need drivers after all.

• No wifi after installing windows 7 on hp pavilion g6

  Hello

  Could you guys help me please with my hp pavilion g6 with the product ID number A4G31AV and pci\ven_1814 & dev_539a & subsys_1839103c & rev_00.  I installed windows 7 on my laptop, but I have all the drivers so my wifi is not workink I can not automatically install the. Please help me as soon as POSSIBLE.

  Thank you very much

  Reka.

  Hi Reka,

  If necessary, download and save the following Installer on another PC, then transfer them to your laptop and run them.

  First of all, download and install the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this has completed, restart the laptop.

  Then, download and install the WLAN driver from the link below.

  WLAN Driver - Windows 7.

  All drivers for your laptop can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311 #n300

  Kind regards

  DP - K

• Does anyone has installed Windows 7 on a laptop Pavilion DV2175

  If anyone has installed Windows 7 on a laptop Pavilion DV2175 and if so it is 32 or 64 bit

  Hello:

  There is an unofficial update guide to windows 7 for the series dv2000.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-upgrade-guide-for-DV2000-models/m-p/186936#M28141

  Given that the maximum amount of memory, that you can install on your laptop is only 2 GB, I'd go with W7 32 bit, as a 64 bit OS requires more memory and disk space to run a 32 bit OS only.

  Not double, but more.

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• Pavilion dv4: cannot install windows 8.1

  I installed windows 8.1, after installation on drive c. The PC reboots and start loading. But he remained at 8.1 windows logo. He drives half an hour. After saying the message "your PC ran into a problem needs to restart. What should I do? My PC information: pavilion dv4
  3 GB ram 32-bit.

  Hi @ismailbadhusha,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and problems with installing Windows 8.1. First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - has begun. Restart the computer after this stage and try to reinstall.

  Your system came with 64-bit Windows. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  If you have an error message could you let me know what it is.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.