Installation failed on SuperMicro H8DA3-2 (Controller SAS LSI 1068E)

Similar Questions

• Model of card mother T7500 and configuration of the controller RAID LSI 1068e

  Hi, I just bought a T7500 workstation I would get around mid-December. Because of current prices for HARD drive storage, I decided to go with the 500 GB basic disk up to HEALING of Thailand. Thus, I am limited to basic integrated RAID controller. Because I am not familiar with the RAID configuration, etc. I wanted to read more before I dive in. The starting point would definitely find what was right for the Precision T7500 motherboard. Surprise! I can't find information anywhere. Even Dell people (3 different sales and support representatives) have not managed to tell me it's the Intel 5520 chipset (it looks that they believe that it is the motherboard model...). Well, I'm stuck. I would appreciate if someone could provide me with the model of motherboard and Special Edition, all information on the capabilities of the controller integrated RAID (LSI 1068e) would help me determine what drives should I plan to buy. In addition, one thing that is not clear to me what I inferred from the configuration on the website Wizard is the issue around disks > 2 TB. Of after I read it, I was not able to determine whether the problem was related to the simple readers > 2 TB or if it was related to the management of a storage space > 2 TB (which could be composed of several readers less than 2 TB). What I have in mind (remember that I do not have the machine right now) is to 4 X 1 TB drives in a RAID 0 + 1 (which I'm not sure that the integrated controller supports) configuration that will result in the storage of 2 GB mirrored. The operating system is Win 7 64 bit. Thanks in advance for any info that will help me to prepare my setup (buy hard drives, if I can find cheap ones) and find information on the configuration of the RAID. MrBricole

  I'm sure the T7500 uses an Intel Server Board (since this chipset is located on the Intel site under its motherboards, Dell is essentially correct, even if they didn't know why), but it doesn't matter in the context of your question, because the '' integrated '' RAID controller is not actually on the Board.  It's a card (called "integrated" only because it has a slot on this machine).  Because the functionality of the RAID controller is not on the Board of Directors, Board info will not help you.  Everything you need to know about your Council and the entire system, you can get the T7500 manual.  SAS 6/iR (LSI 1068e) RAID controller information can be found here:

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  The SAS 6/iR will not support more than 2 TB of drives, or it will support more than 2 TB of virtual disks.

  It will also only supports RAID 0 OR RAID 1 OR both, but not together (not levels no RAID nested as RAID 10 or 0 + 1).

  So with four 1 TB drives, you can easily do two RAID 1 (called integrated mirror in the controller BIOS CTRL-C)... or you can do two 2-drive RAID 0 (Stripe called integrated in the controller BIOS CTRL-C)... or you can run mode non-RAID, with four individual discs in the operating system.  With this controller, those are your only options with four 1 TB drives.

  If you want / need more features RAID (nested RAID, 2 TB of the VFD above, on board levels, cache, etc.), you must upgrade to the PERC 6 / i.

  Do not buy office records class... Make sure you get enterprise-class drives.  If you decide at some point to go with PERC, not only enterprise class disks will be fundamentally necessary, but certified records would be strongly recommended for stability and performance.

• installation fails Xbox controller

  I have a xbox controller, I tried to install it on my pc through plug and play and a message came saying installation fail someone can help?

  Hi Simon,.

  The question you posted would be better suited in the Xbox Forums since we have dedicated to this support; We recommend that you post your question in the Xbox Forums to get help:

  Technical support of the Xbox Forums: http://forums.xbox.com/gfw/default.aspx

  See the following for more information Microsoft article.

  Set up your Xbox 360 for Windows controller

  Hope that the information provided is useful.

• Update installation failed: [0%] fatal error running script 000_start 001_check_models.pl

  try to upgrade to a fire power (formerly sourcefire) DC750 to 6.0.0.0...

  ram upgrade

  5.4.1.6 running

  Get the following error shortly after the beginning of the upgrade.

  Update installation failed: [0%] fatal error running script 000_start 001_check_models.pl

  Hello

  This indicates that the version of the software that you use may not be for this model.

  If you use any sensor series 2 old on this domain controller, which would need to be removed.

  Can you check software 6.0 again to make sure that its for DC 750 and also go in the repertoire/var/log/sf/6.0. Check the content of /000_start and then the tail 001_check_models.pl.log

  It will erase more log details.

  Rate if helps.

  Yogesh

• SourceFire - update Virtual Center of defence 6.0.0 Installation failed

  Hello

  I get the following error when applies the 6.0.0 - Sourcefire_3D_Defense_Center_S3_Upgrade - 1005.sh

  Update Installation Failed: [% 1] Fatal error: error running script 000_start/003_check_DC_memory.pl

  Any resolution will appreciate

  Thank you.

  Hello

  This script verifies the memory available to the centre of defence to use, and 6.0.0 requires a minimum of 6 GB of memory, an increase from 5.x versions.

  -Stop of the DC gracefully from the CLI or WebUI

  -In vSphere, right-click on the domain controller, select change settings.

  -Adjust the Configuration to allow a minimum of 6 GB to the device and save the memory settings

  -Turn on the DC back and resume the update.

  Thank you

  Guillaume

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• Skype installation failed; Code of 1632

  Im making a mistake like:

  Skype installation failed; Code of 1632
  The temp folder is on a drive that is full or is inaccessible. Free space on the disk, or else make sure you have persimission of Scripture on the Temp folder.

  I tried to use different POS and also I tried to install the .msi version but I get page not found error.please help me. I use windows 8.

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/help-need-a-way-to-run-Skype-w-o-install/m-p/38...

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).

• Satellite A300 - value added Package installation fails

  Hello

  I'm running a new Satellite A300, Vista Home Premium.
  I wasn't able to run PC-diagnose and volume button wasn't working so I uninstalled the existing extra value package, rebooted the system and tried to reinstall the latest version.

  The installation failed. I tried about four times with three newly uploaded files.

  Is there anything I can do to get the installation to complete?

  Thank you

  Dave

  Hello

  I'm not very well why you are not able to install the m VAP.
  I managed to install it.

  As mentioned, you should uninstall the old version, then download the new right version of the Toshiba page and run the exe.
  All that s

  In many cases these issues is NOT related to the applications that you are trying to install, but the Windows operating system. especially he confused s upwards and therefore this installation fails.

  In your case, I recommend you to clean the operating system using the CCleaner and if necessary to reinstall the operating system in order to solve this problem.

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!

• Skype installation failed; code 1632 on new disc

  Recently, one of my drives hard due is age, it was my drive "temp files" (which was not my main hard drive), after you remove the diskette and restart the Skype system did not work and there icon disappeared, since my main hard drive is small enough space (64 GB SSD) I do not bother to change the folder for temporary files and simply collapsed using the computer until I could get a new drive.

  Two days ago I had a new hard drive (2 TB, I've implemented 2 divides each 1 to and 'K' and 'L' system volume) I put the folder for temporary files on 'K:\tmp' and 'K:\temp', I'm sure that these folders work like temp files folders, other programs can write and read without any problem.

  http://3.1M.YT/N8DQSHh.PNG

  http://1.1M.YT/AQ4i5Ql.PNG

  And the drive pretty much free space:

  http://1.1M.YT/fxJV_fj.PNG

  Anyway when trying to install Skype I get the error message 1632:

  Skype installation failed; Code of 1632
  
  The Temp folder is on a drive that is full or inaccessible.
  Free space on the drive or verify that you have permission write to the Temp folder.

  I am sure that the drive/folder is accessible and is almost empty!

  I thought maybe it was because of the old installation is corrupted, so I tried unistalling it first, but I got exactly the same error when you try to uninstall! Then I proceeded to uninstall manually (remove the files manually, temporary files Skype roaming/program files/etc and deleted each registry entry associated with Skype manually), after this new attempt but still the same.

  -J' tried with the "SkypeSetup.exe", "SkypeSetupFull.exe", they both give me the same error 1632.

  -J' I tried it with the "SkypeSetup.msi", it gives me Error 2755. http://2.1M.YT/ubP0z2.PNG

  -J' googled tried many, everything what I found on the internet, but I still get the same.

  -L'exe 'extract and replace' the installer msi is not an option since I did not all the files associated with Skype.

  -J' tried to change the temporary files in "C:" folder and install but still the same.

  Some useful information:

  -Windows 7 (x 64)

  -Hard drive: SSD 64 GB in total, 5 ~ GB of free space, system volume "C:".

  -The hard drive temp file: 931 GB, 916 GB of free space, System total volume "K:" (new, total space 2 TB / two partitions)

  Please help me I don't know what to do anymore!

  Create a new folder on the partition of K.

  Download Skype.exe and SkypeResources.dll of the OneDrive site files and place these files in the new folder.

  https://onedrive.live.com/redir?RESID=DB6E69DD03D093C9%21180

  If you intend to communicate with users on Skype for business, then you must also the gtr 4... files.

  Create a desktop shortcut pointing to Skype.exe and tent now start Skype using this shortcut.

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you