installation fails Xbox controller

Similar Questions

• Windows 7 x 64: driver problems a wireless Xbox controller

  When I connect the Xbox controller to the computer via micro-USB cable, Windows Update searches for a driver, but no driver is found. When I plug the controller after installation of the failed pilot system, the controller vibrates and the computer says that there is a problem. In Device Manager, the controller is labeled as controller. I looked on the official website of Microsoft for drivers so that I could update the driver manually, but the only free software is of technical manuals.

  Why Windows Update does not find a driver to install, and how could I solve this problem?

  Hi Maverick,

  Welcome to the Microsoft community.

  I suggest you check out the following link. This contains information about the configuration of the wireless controller a Xbox and detailed troubleshooting device driver issues.

  How to connect a controller to wireless an Xbox to a PC

  https://support.Xbox.com/en-us/Xbox-on-Windows/Accessories/connect-Xbox-one-controller-to-PC

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• A doesn´t Xbox controller work on my PC (win7).

  Hello

  I bought a Xbox controller which contained a USB cable and I wanted to connect to my PC. The pilot wouldn automatically install so I tried to install it manually, but it failed. There are two drivers that I tried to install. One was a msi file that wouldn recognize my controller and the others were drivers listed on the microsoft support site, but install the wouldn just file INF. I tried almost everything to make my controller to work and I'm desperate T_T.

  Pls help.

  PS: Sry for my obnoxiously bad English.

  Hey,.

  Please contact Microsoft Community.

  I understand your question.

  As if now I suggest you refer to the suggestion given by Komal in the mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-7-reports-unsigned-driver-for-Xbox-one/9bc9a837-4572-4372-bde9-7cc1538ff088

  I hope this helps.

• Update installation failed: [0%] fatal error running script 000_start 001_check_models.pl

  try to upgrade to a fire power (formerly sourcefire) DC750 to 6.0.0.0...

  ram upgrade

  5.4.1.6 running

  Get the following error shortly after the beginning of the upgrade.

  Update installation failed: [0%] fatal error running script 000_start 001_check_models.pl

  Hello

  This indicates that the version of the software that you use may not be for this model.

  If you use any sensor series 2 old on this domain controller, which would need to be removed.

  Can you check software 6.0 again to make sure that its for DC 750 and also go in the repertoire/var/log/sf/6.0. Check the content of /000_start and then the tail 001_check_models.pl.log

  It will erase more log details.

  Rate if helps.

  Yogesh

• SourceFire - update Virtual Center of defence 6.0.0 Installation failed

  Hello

  I get the following error when applies the 6.0.0 - Sourcefire_3D_Defense_Center_S3_Upgrade - 1005.sh

  Update Installation Failed: [% 1] Fatal error: error running script 000_start/003_check_DC_memory.pl

  Any resolution will appreciate

  Thank you.

  Hello

  This script verifies the memory available to the centre of defence to use, and 6.0.0 requires a minimum of 6 GB of memory, an increase from 5.x versions.

  -Stop of the DC gracefully from the CLI or WebUI

  -In vSphere, right-click on the domain controller, select change settings.

  -Adjust the Configuration to allow a minimum of 6 GB to the device and save the memory settings

  -Turn on the DC back and resume the update.

  Thank you

  Guillaume

• PC wireless to Xbox controller will not sync

  Wireless pc Xbox controller will not work. It installs, but when I sync with the wireless receiver the controller, the controller just flashes and never made a connection, however, when I tried on my brother's computer, it works fine.

  I did search all over the internet I can find about this investigation, but had no luck. Help, please!

  Hello

  Check out the link and follow the steps.

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

• Xbox controller for pc windows

  I have a problem with my xbox controller controller button above the rt pc permanantly stuck and none is functional, this can sometimes be caused by dead skin cells which can cause problems with many devices such as mice and trackballs, but this is usually easily solved with some simple maintenance how ever, it is not possible to carry out any maintenance operation unless you have an extraction device dedicated which is exclusive to this form of material that you can not use a screwdriver preceission possible cross-head with other hardware does anyone know where I can buy a

  
  
  facts on the controller
  There is no profile editor
  on a new installation of windows sys ops even knows if its there it will not be updated or digitally sign at all until you put the original disc of pilots in and at no time ask you to do
  
  
  There is no icon for games in windows, one Panel because he used to be with the versions prior Windows which makes the longer process back to test and configure as go to printers and devices to achieve
  
  
  and although you can activate the game controller by pressing the x key, once you turn off your pc that you can not turn it off using the same button, that you end up with a green flashing until it comes to expiration, or you remove and replace compartment

  Hi robertleedham,

  
  Thanks for posting your query on the Microsoft Community.
   
  
  As it comes with pc Xbox controller gamepad I suggest that post you the same question in the Xbox forums for assistance.
  Check out the link and ask your question.
  http://www.Xbox.com/en-us/forums
   
  
  Hope the helps of information.
   
  Do get back to us and let us know in case you need assistance about Windows.

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Xcode Server installation failed (ssl configuration infrastructure)

  After the upgrade to Server 5.2 today, I am unable to start the service of Xcode as a result of a mistake.

  The first time, I tried to implement the service, after having chosen the Xcode application, I was asked to create a service user account Xcode. So, I followed the guests to create a Xcode Server user account.

  Then I saw a message that Xcode Helper should be allowed to make UI script, to which I agreed.

  Finally, a progress bar appears where, apparently, that was under the service of Xcode configuration.

  And then an error stating:

  Xcode Server installation failed (ssl configuration infrastructure)

  Try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  Given that I had just installed the latest version of Xcode previously, I advanced and checked that Xcode launches without problem, and no message appears.

  Then I went to System Preferences > Security & privacy > accessibility and verified that an entry is added for Xcode Helper, and I checked the box next to it to allow access.

  Also, I have advanced and connected to the server of Xcode user account and used the fast user switching option to return to my main account.

  Unfortunately, trying to start again service results in the same error. I even tried to start the service when you are logged on the server of Xcode user account. Whenever it has failed with the same message.

  Whenever I try to start the service, I see this (or very similar) message sequence struck the system log:

  20 September 15:50:36 servermgr_xcode Server [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 10;

  currentPercentageCompleteRangeMinimum = 10;

  currentStep = 'Xcode stop server';

  percentComplete = 10;

  status = running;

  }

  20 September 15:50:37 Server servermgr_xcode [867]: task completed (State 0)

  20 September 15:50:37 Server servermgr_xcode [867]: stderr output for the job:

  (4 / 6) [START] stop nginx daemon

  (3 / 6) Server [START] stop API

  (1 / 6) [START] stop CouchDB

  (6 / 6) [START] stop builder

  (5 / 6) [START] daemon stop control

  (2 / 6) [START] stop repeat

  (5 / 6) [END - 0.05 S] Stop control daemon

  (1 / 6) [END - 0.05 S] Judgment of CouchDB

  (2 / 6) [END - 0.05 S] Stopping repeat

  (3 / 6) [END - 0.05 S] Stop server API

  (4 / 6) [END - 0.14 S] Stop the nginx daemon

  (6 / 6) [END - 0.16 S] Stop generator

  A successful!

  Total time: 0.32 seconds

  20 September 15:50:37 Server servermgr_xcode [867]: launch/usr/bin/xcrun xcscontrol - initialize - build-service-user xcodeserver

  20 September 15:50:37 Server servermgr_xcode [867]: wait for task to leave

  20 September 15:50:37 Server lsd [961]: LaunchServices: could not store file lsd-identifiers to /private/var/db/lsd/com.apple.lsdschemes.plist

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server sudo [1422]: root: TTY = unknown; PWD =; USER = nobody; /Applications/XCode.app/Contents/developer = / usr/bin/file COMMAND

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: (1/29) checking that Xcode is accessible

  20 September 15:50:37 Server servermgr_xcode [867]: xcscontrol reported progress: running (4/29) xcode-selector - /Applications/Xcode.app

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: integration of control to prepare (9/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (11/29) setting up the config for Redis file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (12/29) setting up the config for CouchDB file

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: launchd jobs (13/29) system configuration

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: (14/29) creative group for users of service if required

  Note : There was a lot of posts like this that I missed:

  20 September 15:50:38 syslogd server [69]: notice of Configuration:

  ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

  These messages may not appear in the standard system log files or in the database of the ASL.

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: configuration record (16/29)

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: users of creative services (17/29) if necessary

  20 September 15:50:38 Server servermgr_xcode [867]: xcscontrol reported progress: infrastructure configuration of SSL (18/29)

  20 September 15:50:39 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "Configuring SSL infrastructure."

  percentComplete = 54;

  status = running;

  }

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  20 September 15:50:41 Server servermgr_xcode [867]: xcscontrol reported progress: FAILED (18/29): configuration of SSL infrastructure

  20 September 15:50:41 Server servermgr_xcode [867]: task completed (Status 5)

  20 September 15:50:41 Server servermgr_xcode [867]: stderr output for the job:

  (1/29) [START] make sure Xcode is accessible

  (1/29) [END - 0.20 S] Make sure Xcode is accessible

  Audit (2/29) [START] version of Xcode is supported

  (2/29) [END - 0.00 S] Check if the version of Xcode is supported

  Developer mode (5/29) [START] if necessary activation

  [START] Running (4/29) xcode-selector - /Applications/Xcode.app

  (29/3) [START] check if the server version is supported

  (3/29) [END - 0.02 S] Check if the server version is supported

  Data directories (6/29) [START] creation by default (if they are missing)

  (6/29) [END - 0.00 S] Creation of data directories by default (if they are missing)

  (7/29) [START] create a symbolic link to the current path of the Xcode application

  Access to the repository (8/29) [START] HTTP configuration

  Integration of control (9/29) [STARTED] preparation

  Access [START] SSH configuration repository (10/29)

  (8/29) [END - 0.12 S] Access to the HTTP repository configuration

  (7/29) [END - 0.12 S] Create a symbolic link to the current path of the Xcode application

  (10/29) [END - 0.12 S] The access to the repository SSH configuration

  (11/29) [START] establishing the file config for Redis

  (12/29) [START] set up the config for CouchDB file

  (13/29) [START] Setup launchd job system

  (5/29) [END - 0.16 S] Enabling developer mode if necessary

  (9/29) [END - 0.23 S] Preparation of control integrations

  (11/29) [END - 0.16 S] Setting up the config for Redis file

  (12/29) [END - 0.20 S] Setting up the config for CouchDB file

  (13/29) [END - 0.20 S] Launchd jobs system configuration

  Group creation [START] (14/29) for users of service if required

  Saving configuration [START] (16/29)

  (15/29) [START] configuration CouchDB to use all cores

  (14/29) [END - 0.02 S] Creation of service if required users group

  Users of creative services [START] (17/29) if necessary

  (4/29) [END - 0.41 S] Running xcode - select - switch for /Applications/Xcode.app

  (15/29) [END - 0.08] Configuration of CouchDB to use all cores

  (16/29) [END - 0.33 S] Configuration of the recording

  (17/29) [END - 0.52 S] Creation of users of the service if necessary

  Configuration of SSL infrastructure [START] (18/29)

  (18/29) [END - 3.03 S] FAILED: SSL infrastructure Configuration

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Total time: 4.13 seconds

  The service initialization error: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  20 September 15:50:41 Server servermgr_xcode [867]: response: {}

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  status = 1;

  }

  20 September 15:50:41 com.apple.xpc.launchd [Server 1] (com.apple.dt.XCSDeviceService [1417]): Service not out 5 seconds after SIGTERM. Sending SIGKILL.

  20 September 15:50:42 Server servermgr_xcode [867]: getSetXcodePathProgressWithRequest: {}

  control = getSetXcodePathProgress;

  currentPercentageCompleteRangeMaximum = 75;

  currentPercentageCompleteRangeMinimum = 20;

  currentStep = "FAILED: SSL infrastructure configuration ';

  error = "Xcode Server Configuration has failed (ssl configuration infrastructure)";

  errorCode = "-1";

  errorDomain = ServermgrXcodeErrorDomain;

  errorLocalizedDescription = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  errorLocalizedFailureReason = "failed to install Service in step: Setup ssl infrastructure";

  errorLocalizedRecoverySuggestion = "try clicking on choose Xcode and selecting a new version of Xcode or upgrade to a newer version of the server.

  errorString = "Configuration of Xcode Server failed (ssl configuration infrastructure)";

  percentComplete = 54;

  status = FAILURE;

  }

  This article is interesting:

  20 September 15:50:41 com.apple.SecurityServer [114 Server]: displaying guest Keychain for Applications/Xcode.app/Contents/Developer/usr/bin/xcscontrol(1421)

  No prompt was displayed at this time. I had to see a real Keychain prompt? In any case, this article seems to be the cause of the problem:

  Failed: could not export the certificate of the server API: error Domain = =-25308 Security Code 'user intervention is not permitted.' UserInfo = {NSLocalizedDescription = User interaction is not allowed.}

  Help to get the Xcode service backup and race would be much appreciated!

  I had this same problem. I typed in the following in the terminal:

  sudo /applications/xcode-beta6.app/contents/developer/usr/bin/xcscontrol--reinitialiser

  After the reset, I tried to enable the server to Xcode from the macOS GUI server and it worked

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

  I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

  Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
  The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

  I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
  As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

  I tried to uninstall and reinstall several times but still get the same message

  Help, what do I do to fix this?

  File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

  Hello

  A question: could you please post you completely portable model number?
  I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

  In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

  However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

• Skype installation failed; Code of 1632

  Im making a mistake like:

  Skype installation failed; Code of 1632
  The temp folder is on a drive that is full or is inaccessible. Free space on the disk, or else make sure you have persimission of Scripture on the Temp folder.

  I tried to use different POS and also I tried to install the .msi version but I get page not found error.please help me. I use windows 8.

  Try this:

  http://community.Skype.com/T5/Windows-desktop-client/help-need-a-way-to-run-Skype-w-o-install/m-p/38...

• DeskJet 3720: Driver Installation fails

  Base driver sw installation fails with the following error:

  Call to DriverPackageInstall returned error-536870329 for package ' < C:\Program HP HP DeskJet 3700 series\DriverStore\YetiV4\hpygid20_v4.inf

  Thanks PCalaminci. I got exactly the same error and same configuration (Win10 x 64 with bitlocker active). The solution is as PCalaminci suggests: temporarily disable the driver signature digital verfifaction (looks like HP delivered a driver with a valid Publisher unknown/no signature that is the cause of the installation of the bomb).

  Note: To temporarily disable checking of driver (on Windows 10) signing it is easier...

  1. In Windows, go to PC settings (you can search for it in the start menu).
  2. Click on 'update & recovery' on the left side.
  3. Click on "Recovery" on the left side.
  4. Click "Restart now" button under Advanced Boot.
  5. Select Troubleshooting-> advanced-> startup parameters and press Restart
  6. Press the number corresponding to the entry 7 "disable driver signature enforcement".
  7. Install the drivers. After your system restarts again once you won't able to install any unsigned drivers until you repeat steps 1-6.

  Above works even if you have your hard drive encrypted with bitlocker (you need not type in your recovery key).

• Satellite A300 - value added Package installation fails

  Hello

  I'm running a new Satellite A300, Vista Home Premium.
  I wasn't able to run PC-diagnose and volume button wasn't working so I uninstalled the existing extra value package, rebooted the system and tried to reinstall the latest version.

  The installation failed. I tried about four times with three newly uploaded files.

  Is there anything I can do to get the installation to complete?

  Thank you

  Dave

  Hello

  I'm not very well why you are not able to install the m VAP.
  I managed to install it.

  As mentioned, you should uninstall the old version, then download the new right version of the Toshiba page and run the exe.
  All that s

  In many cases these issues is NOT related to the applications that you are trying to install, but the Windows operating system. especially he confused s upwards and therefore this installation fails.

  In your case, I recommend you to clean the operating system using the CCleaner and if necessary to reinstall the operating system in order to solve this problem.

• Tecra A11 - VAP installation failed on Win 7 64 bit error 0x8146045B

  Hello

  I need help. The flash on my phone card tool was out of use. I downloaded the value added package in the 1.3.5 version and tried to install. Installation fail after having extracted the Exe file compressed with the error "Setup PVAT error. [0x8146045B] ". I thougt the error may occure while I not remove the installed software before. So I uninstall the value-added package. After reboot and without installation of value added new package the same error.

  How can I install value added package again?

  Tecra A11, Windows 7 64 bit

  Concerning
  TS

  Hi TSAGI,.

  I had a similar problem with the package of added value, so I also removed the previous version first. But after the reboot, I used the freeware CCleaner tool to clean the registry and delete the old keys of VAP. So just download CCleaner and run it, after this restart again and try to install VAP.

  Check this box!