installation fails; CC Connect records as installed

Similar Questions

• OfficeJet 6600 Gets the message of Network Installation fails when you try to install

  Hello

  I have the worst time setting up my new printer wireless Officejet 6600. I work with a wireless-N router that was purchased less than a year ago. I have other wireless products that work well with the internet, so I do not see there is a connectivity problem.

  The test of the printer indicates that everything is OK:

  Wireless on - PASS
  Wireless - PASS work
  Signal quality - very good
  Connected - PASS

  etc, etc.

  I ran through all the troubleshooting I can find and nothing works. I have disabled the firewall, unplugged my router and modem, disconnected the printer, tried to implement on its own IP address. The installation wizard finds her and tries to implement, but I only get the message that it was a "network installation without success.

  Has anyone experience this problem?

  Any new ideas on troubleshooting are welcome.

  Thank you
  Liz

  Hello

  Thank you for your comments. I didn't expect such a quick response, which was great.

  I move the printer to get a signal 'excellent' and tried the other steps you listed.  Through some googling more, we discovered that we needed to do the following:

  Go to the control panel

  Select Printers and faxes

  Right click and select Properties

  Select the Ports section

  Add the port to the IP address of the printer displays

  Not sure if this is the ideal way, but of course, it worked and I am now a happy customer. Hope it helps someone. I'll still Bravo for having responded so quickly.

  Thanks again!

• Windows Updates Installation fail when connected remotely

  I looked at a lot of articles but all VPN users have failures when updates are pushed and must come in local offices to complete.  SCCM is used and it detects the pc and announces the update/s required, but when they download and install there is no progress and eventual failure.  Windowsupdatelog gives no particular reason. Internet settings are the same for in and out of the office.  What can I get? Thank you

  Hey T1961,
   
  Why not post in the TechNet forum? Your message will be more suitable than this problem relate to the VPN.
   
  Here's the link from TechNet: http://social.technet.microsoft.com/Forums/en-US/categories

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• First Elements 13 - Installer fail to initialize

  Hello

  I get an error "The Installer failed initialize", when trying to install the first 13 items.

  OS: Windows 8.1

  I tried the below, but did not the program on the list to uninstall when I get to the list of Control Panel programs.

  Please check the help below document:

  Error "Setup could not initialize". Install desktop application | Windows

  
  

  ANY advice would be really appreciated.

  Thank you

  O'Briain
  

  O'Briain you indicated that you had no other Adobe Creative previously installed software.  If this is the case there should be no previous installation of Adobe Application Manager.  Please use the Control Panel programs and features to ensure that all Adobe Creative Software are removed.

  You will then want to use the available CC cleaning tool to use CC Cleaner tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html to ensure that all entries have been deleted.

• I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I have already

  I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I already had a free annual subscription to cc through my new canon camera, but I installed for my mac already. No phone number to call, adobe contact to say amazon, what do I do?

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» PLEASE DOWNLOAD A

  Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?

  first of all uninstall cc on your computer.

  Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe

  If that translates into the same initialization error:

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Adobe Flash lost the connection @ 30%. Mac installation fails.

  I'm seeing this anywhere in the forums without anyone find a solution. I tried everything suggested in Safari or Firefox, including a clean install 3 times! Even after uninstalling and deleting the files flash in the library, when I try to download and install it immediately starts at 30% and then I get the error message "the connection interruption. Trying to connect... "it hangs a little bit and then I get"the connection has failed. Could not complete the installation. "I go to their link for assistance when the installation fails but the link which they suggest to download directly from the final step is"not FOUND ". See here: Installation problems | Flash Player | Mac

  This same link appears in several forums for a solution. I don't know what else to do. I write this option to add many others with the same question in the hope that Adobe will solve this problem! I'm on a MAC OS 10.9.5. Never had this problem before with flash updates!

  Solution found on another thread. Download the installer here offline: http://fpdownload.macromedia.com/pub/flashplayer/current/support/install_flash_player_osx. dmg

  I downloaded and was able to install Flash correctly. Make sure you do a clean just to be safe installation.

• I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  I downloaded Sierra.  Installation failed saying corrupted download.  App Store still says downloaded, but there is no button install and I can't download it again.

  What should I do?

  Hello volvoxc70,

  I understand that you have downloaded macOS Sierra, but are not able to install it, because you are told that the download was corrupted. In a situation like this, the next step would be to remove existing installation application download and re - download.
  

  Applications downloaded from the App Store: click on the Launchpad icon in the Dock, hold the application icon until all the icons begin to jiggle, then click on the button to remove the application. If you later want the app, you can reinstall it on the App Store.

  OS X El Capitan: install, update and uninstall applications
  https://support.Apple.com/kb/PH21867

  If you do not have Launchpad on your Dock, you can access your Applications folder in the Finder menu reach > Applications. Once in the application, find install it macOS Sierra app, click once to select it, open the file menu > move to the trash. You will need to enter your administrator password to perform this operation.

  See you soon!

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• Whenever I try to install the printer Lexmark Professional 6600 series wireless, but each time said the message of the printer installation failed.

  Tonight, I tried several times installation/connection to the wireless Lexmark Professional 6600 series printer but every time the printer message said installation failed.  Why?  What should I do to connect to this printer?

  Title: original printer Installation failed

  Hello

  Sorry for the late reply.  I find the user guide to use this device.  Check page 128 for troubleshooting wireless.

  http://www.Lexmark.com/publications/pdfs/2007/5600-6600/en.html

  What version of Windows are you using then I can move you on the appropriate forum?

• Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

  I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

  Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
  I can't find info list of video drivers of HP being a security risk.
  Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

  Version: 2.00 Rev a.
  October 16, 2008

  There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

  If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
  MowGreen Services consumer safety update

• Cannot install Silverlight: "Installation Failed".

  Original title: trying to watch movies from Netflix on my Windows XP PC, but I cannot because Silverlight is not installed properly...

  I'm watching movies from Netflix on my Windows XP, computer at home, BUT I can't because Microsoft SILVERLIGHT will not install correctly on my computer, WHY? I have all of the necessary "requirements" for Silverlight, but every time I try to install, I get this message damm: "Installation Failed" generic: ID

  Hello BMWUSMC,

  It can be split to components in a previous installation, try to uninstall the first Silverlight components. There is an article which includes a fix to uninstall Silverlight, give this a try.

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  I hope this helps.

  LD

• I can't install the update of security KB2724197, get error installation failed

  The yellow ball advising me that there is an update to install, appears where it's always on my windows XP PC.
  When I click on the ball, continue to the next step which says it's install, but then I get a message that the installation has failed.
  I tried to install the update of security KB2724197 at least 10 times without success.
  I rebooted, tried again and also checked for viruses and always without success.
  The yellow ball continues to appear.
  What is my next step, given that my PC is vulnerable to attack?
  Joseph

  Hi JosephR,

  In some other threads that I saw about problems with this particular update, the problem has been resolved with one of two things.

  First of all, I suggest you reset your Windows Components update.  Please take a look at the article below with the Fixit to do it for you:

  http://support.Microsoft.com/kb/971058

  If this does not help, the issue could also be caused by a rootkit on your system.  Please take a look at the similar thread below where the poster was able to resolve the problem through Taupo Tech by removing the rootkit:

  Cannot install Windows Update KB2724197, error FFFFFFFE

  I hope this helps!

• now, I have no audio device, tried to download the realtek drivers but failed: class installer has refused the request to install or update the device?

  Original title: the class installer has refused the request to install or update the device?

  now I don't have a device audio, reinstalled windows xp with recovery disk, tried to download the realtek drivers but failed.

  Hello

  1. What is the status of the sound card in Device Manager?

  The following article might be useful: no sound in Windows

• How to install XP SP3 when installation fails repeatedly?

  Have tried to install SP3 and failed repeatedly. The installation is not complete. Does not seem to matter in the way everything went, so I don't care. However, to have just spent 2 days trying to install McAfee Antivirus Pluss 2011, of which 4 chat sessions and session 1 phone with McAfee representatives, only to discover that my machine must be updated tp SP3. Help.

  Start here:

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717