Installation HP solution Center photosmart C4385

Similar Questions

• Cannot find an installation package for Solution Center

  When I start my computer, a box comes on the screen saying: Solution Center please wait while windows configures Solution Center.        (On the bottom of the box there)    Cancel
     
  Then another box comes in addition to the one that says the Solution Center OK and cancel (in the upper right corner) the component you are trying to use is on a CD-Rom or another removable disk that is not available.
  Insert the disk Center of Solution and clk OK (at the bottom of this box is a box saying - use source - and another nest box to it with - browse - in.)

  When I click on cancel another box appears.      It said Solution Center X (top right) (there is a small warning sign, then an installation package for the productSolution Center is not found. Try the installation again using a valid copy of the installation package "Solution Center.msi."     OK (bottom)

  I have very good clk and then cancel to get it off my screen.    Is there a place I can get this Package of Solution or a way to keep these boxes appear each time I turn on my computer?

  So the Solution Center probably has to do with your HP printer. I believe that you need it to use all the features of the printer. that is, scanning the computer. Knowing that you have an HP printer let me do a Google search. This is one of the links to the forums of HP that describes a fix (scroll down to the second position of Douglas Leshures):

  http://forums13.itrc.HP.com/service/forums/bizsupport/QuestionAnswer.do?admit=109447627+1239667320346+28353475&ThreadId=1201005

  If you want to see other related links, I used this search term to my search on Google:

  "Center of solutions HP please wait while Windows configures Solution Center"

  If you feel uncomfortable a lot of computer work - and it's perfectly OK to admit it, because we have all our areas of expertise - have a competent local computer tech, come on up. I do not recommend using a type BigComputerStore/GeekSquad of the place. MS - MVP - Elephant Boy computers - don't panic!

• Photosmart C4588: Solution Center missing hp C4588

  Hello

  I recently installed the latest version of the software for my printer from the HP site. Post, the installer HP solution Center disappeared. Please help.

  Kind regards

  Rajat

  Hi Rajat24,

  Welcome to the HP Forums.

  I see that you have a problem with the installation.

  Please click on the following link for "this program might not have installed correctly"

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Why do I get an error on "Solution Center" message when I open my computer

  Whenever I open my computer I get the error "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc from center of Solution and click OK. "It is followed by"an installation package for the product that takes Center cannot be found. Try the aain of installation using a valid copy of the installation package Solution Center.msi".

  The solution center is part of the HP printing software. Put the HP printer installation disc in your drive when you are prompted, and then click 'OK '. MS - MVP - Elephant Boy computers - don't panic!

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• Problem with the installation of the solution Center for a HP Photosmart Premium all-in-one printer - C309g

  Hi people,

  I searched many threads and found some tips to remedy this, tried and had no chance.

  I am running Windows 7.  All updates are underway.  When I bought the printer, I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center has stopped working.

  Uninstalled all HP software to reinstall.  I could only reinstall HP Update.  I was able to load the basic print and scan drivers, but not following any software, including solutions Center.  Installation stops abruptly after "install updates".

  I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.

  What can I do with my printer (HP Photosmart Premium all-in-One Printer - C309g)?

  Thank you

  Alex

   

  Screenshot of the update section:

  

  

• HP ProBook b 6450: Solution Center Software for the range of all-in-one printers, HP Photosmart C4385

  I installed the package full HP printer and it has not installed the solution Center. Impossible to find. Need this to scan documents. What should I do?

  Hello

  You can download the complete software of this site features:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-C4380-all-in-one-printer-series/3221640/model/3221645#Z7_3054ICK0K8UDA0AQC11TA930O2

  Once you have done this, is that you can uninstall before reinstalling the software downloaded?

  This printer model IS USED the Solution Center.

  Let us know how it goes.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

• HP PhotoSmart Prem 310 Series: Installation on PC Windows 8.1 HP solutions Center

  My printer is a model 310 that I bought in 2011.  The DVD accompanying installation supports Windows XP, Vista and 7.  The version number of the DVD is 14.4.0 and I used it to try and install "HP Solution Center" on my new PC for Windows 8.1.  What I get is a picture of a building with a few plants in a pot by the door and and a sign in front of the building that says "close this application".  On the left are the words "select install to begin the installation of your new HP device."  The problem would then be is that there is no click a button "install".  The only button I can click is 'out' and it then closes the installation.  I think I need a Setup DVD update sent to me or instructions on where I can download the installation of HP for Windows 8.1 solutions Center.  I don't have a problem with printing because my PC, the printer has detected and installed the drivers from printert.

  Thanks in advance,

  Ed

  Hi Ed,

  Of you can still have problems, download and install the software from the following link:

  http://ftp.HP.com/pub/softlib/software13/COL59888/MP-143684-1/PS_AIO_07_C310_FSW_Full_Win_WW_140_408-4.exe

  Before installing the drivers do not forget to open the control panel > devices and printers.

  Right-click any existing C310 icon, and then select Remove an instrument.

  Once that icon removed turn the printer off, only turn on once the installation request to connect.

  Kind regards

  Shlomi

• HP Photosmart B110: HP Solution Center cannot run because your device installation is not complete

  Since the recent 10 upgrade Windows HP Solution Center no longer works.  After the initial Welcome screen, it says "HP Solution Center cannot work because your device installation is not complete."

  The following tips on previous discussions and the support centre, I tried uninstalling and reinstalling several times printing software.  I ' v has also ensured that adobe Reader DC is up-to-date.

  Printing and scanning are fine from other programs.

  Any ideas?

  Hello

  Thank you for using the HP Forums.

  Can you try this program to uninstall Microsoft and then reinstall the software features FULL again?

  https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed...

  Download the software COMPLETE features here.

  Let us know if it works!

• Photosmart C4795: Solution Center cannot run because your installation of the device is not complete

  Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.

  Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:

  HP solutions Center can not run because your device installation is not complete.

  I want to set up a wireless printer connection.

  Appreciate your help.

  Jean,

  It was quite a process, but everything seems to work well!

  I just rebooted my laptop, and now I have the HP Solution Center!

  The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).

  The question that light that I see is that the HP Support Assistant is always located on my taskbar.  How can I get rid of this?

  I can't thank you enough, John, for all your help and advice!

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

  I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

  My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

  Thank you.

  Yes,

  You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

  Try following these steps to solve the USB error during installation:

  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• HP Photosmart C4180 printer and HP Solution Center

  Bought new HP 3500 Pro tour MT series to replace the old tower HP Windows XP.  To use the HP Photosmart C4180 printer that I used with the old tower and have available HP solutions Center.   Data has been transferred from the old disk to the new HP Tower.  Then, I downloaded the printer driver and connected using the USB cable.  The printer will now print and scan but I can't find the HP Solution Center software that I used previously during scanning and photo editing.  I do not remember if I made a basic or complete installation install the driver.  If I do a basic installation and is not software for Solution Center, should I uninstall and reinstall the drivers for this function to work?  Would appreciate a step by step help to solve this problem.  Thank you very much.

  Thanks for the info about your operating system.  And no need to apologize!

  It's very strange that you do not see your printer listed in the list of programs (non - it would not be the framework of Solutions from HP Support).  This leads me to believe that your printer is not actually installed.  If that were the case, you should see something like this (note that I have more printers installed as a regular user )

  

  So you do not see your HP Photosmart C4180 listed here, then I would go and try to install the full driver.  The instructions in my previous post would be the same, but since you have Windows 7, it would be the right document to guide you through the steps.

• Installation of device HP Solution Center is not complete

  I have a PhotoSmart C7280 all-in-one printer works as a printer in Ethernet network.  My PC is a HP Pavilion Slimline s5280t running Windows 7 Pro 64 bit.  I had the printer for longer that I had the Pavilion.  I use HP Solution Center at least once a month to copy documents in PDF format for a job that I have.  Yesterday, I tried to use it and got the error "device is not complete.  Uninstall and reinstall HP Solution Center did not work.  I did some research on the forums and found the discussion of «records starting with 7Z.»

  I ran the Uninstall_L3.bat last night. He uninstalled everything.  I then downloaded the drivers on the HP site, once again. When I ran the installation, it failed because "a file is missing.  He has not said what file.  He created a 'solution' for me, basically going through all the steps to make sure that the printer and the router are working (they are) and the printer was on the network (IE).  I then downloaded the drivers AGAIN and again ONCE had a "missing file" error on installation.  And my printer has been uninstalled.  And I have a NEW suggestion from HP that I should reinstall after turning off all my startup tasks and reboot.

  If the driver package for the C7280 is defective and right now I'd bet money that it's telling me to turn off my startup list, which has not changed in the month, will not help.  Because my printer is no longer under warranty (hey, my PC is out of warranty), I don't expect any help from HP.  I hope that some other users will be able to offer something that will work. I'm about to go back on the CD supplied with the printer and install from that.  Help?

  Sorry, you had a difficult time getting the solution center to work.  You have certainly done all the basic steps and advanced to make this work.  I always keep a forum post stored on my computer that supports troubleshooting the solution at a different level of the Art Center.

  -HP - SOLUTION Solution Center installation problems! --

  I recommend reading this post to review the comments and see how to play the stages and how some problems are exposed.  Certainly, it treats missing files that you referenced.

  I usually just scan using paint or Windows Fax and Scan as soon as I can print as it is just a little more easy to work in the registry of a HP computer.  So please be careful if you choose to go in the registry.

  First thing first, I recommend you to create a different user account in the control panel with the admin rights, then by running the installation disk in the second user account before you attempt anything in the post on the forum above.  This will eliminate any conflict from previous attempts on the main user account.

  I really hope it works for you!  Let me know error messages that you get when installing with the disc.

• Photosmart 3310 printer: HP "Solution Center" can't find printer Photosmart 3310 on local network

  Hello

  My printer Photosmart 3310 scanner was working fine, but I recently had to reinstall the HP Solution Center software.

  Now the solution Center can not find my printer on the LAN.

  • I can connect to the printer via its IP address and see all the information about the printer and scan
  • Printing and scanning doctor can find the printer
  • Windows can see the printer and print

  But the HP Solution Center can not find the printer to install it, even when I type the IP address of the printer in the 'wired network' installation part of the Setup program.

  I used the latest version of the HP Photosmart and Officejet full feature software and drivers (August 2015).

  I don't know what else to do to try to get the HP Solution Center to find my pronter, I disabled the firewall, I tried to connect wireless and USB, but nothing seems to get the solution center to recognize my printer.

  Any suggestions?

  Concerning

  Hello

  Published on the website of HP software seem to be evil and not one used for your printer.

  I have notified HP to get this fixed number

  Run the installation once more and select uninstall to remove it from your PC, then restart your PC.

  Finally download and install the following software, it's good:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  See you soon,.

  Shlomi