Installation of equipment prevented by strategy

Similar Questions

• Installation of equipment

  I can not install hardware on my computer, he continues to ask the windows disc. Windows is already installed on the computer.

  Hello

  ·        What material you are trying to install on the system?

  ·        Have you managed to install the equipment before on the system without any problems?

  ·        How you try to install the hardware and hence?

  ·        When you get this error message? During installation or at the beginning of the installation?

  Please provide details so that we can help you in a better way.

  I suggest you follow the steps mentioned in the article below.

  With the help of add hardware

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_start_hardware_wizard.mspx?mfr=true

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy 17 t - 3200 CTO: malfunction of the system equipment preventing startup. What material is dead?

  Got a HP Envy 17 3200 CTO LOADED at the time. Quad core, Radeon HD 7850M, etc.
  
  Well the other day something blue screened but froze during this process and seeds of graphs in this screen. Corruption and blocks appeared and disappeared. I was forced to close during the blue screen as something bigger was not working for the crash dump process, it stood at 0%.
  
  To restart the device display lights, and no noises are made beeps indicating a problem. The Bluray makes his usual preparation sounds it does every time you start upward. He's sitting with a white screen which seems not even to be turned on. The only other indicator is the key caps lock flashes several times and turns off, then blinks several times and turns off, repeating this sitting here...
  
  What part is probably dead on this sucker? CPU? DRAM? Motherboard? Graphics card? How badly can I turn if he doesn't...
  
  While he sits there, various lights keyboard are on as said... Caps lock flashing.
  Power LIGHT on. In my view, that the wireless light too... The light HP envy on the hood is also on...

  Come here to get advice because I do auto repair. No guarantee. I'll buy the requested Party and auto install like I always do for my laptop.

  Hi @woggles,

  Thanks for posting HP forums!

  I read your post and wanted to help.

  I understand that your laptop has crashed with blue screen, and after the forced shutdown, it starts with the white screen and some LEDs + flashing.

  You can check the link for the LED codes: HP - computer laptops does not start and Emits a LED or beep Code

  

  It is best to follow the steps on this link: HP Notebook PC - computer won't start (Windows 10)

  Let me know how it goes.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• my window is vista home basic and am having problem installation update that prevents me to download programs.

  the error message I give is 8007000 b and I did using the window's type fsutil resource setautoreset true C:\ said. at the command prompt.

  0x8007000B
  -2147024885
  COR_E_BADIMAGEFORMAT
  The format of the DLL or the executable being loaded

  Download the update and install the same maybe manually.

  You can download the updates from the catalog.
  http://catalog.update.Microsoft.com/v7/site/home.aspx TaurArian [MVP] 2005-2010 - Update Services

• Flash Player installation stuck at 25 - 30% ("Download" in the Download Manager)

  I am trying to install the latest version of Flash Player on Mac OS X, but not one of my machines is able to so. All are running Yosemite 10.10.2 and in any case, I can download the 'install', but when I run it it gets to the stage of "Download" (25-30%) and produces no other.

  It also appears that are installers is more regular in the FTP://FTP.Adobe.com/pub/Adobe/Flash , so what are my options? How am I supposed to update Flash now?

  
  

  
  

  Furthermore, if anyone from Adobe happens to read this, what is the point then download an "Installer" which is actually just a Downloader for the REAL Installer? And why I still need to download it at all when I put Flash Player automatically updated (and have asked-so every time it is updated?). If you want Flash ever be taken seriously again, then we need an automatic real update that works simply; users should not have to continue running manual pseudo-installateurs just to prevent their blacklist browser Flash to be up-to-date.

  @MFC_0809,.

  Thank you for posting the screenshot, which confirms what Installer (there are several) is problematic.

  Please try the installation program offline posted at the bottom of the Installation problems | Flash Player | Mac page, in the section "problems".

  Haravikk horse,

  You register Flash Player?  This isn't a public download for Flash Player URL, so curious to know where you got this URL from.

  --

  Maria

• The VMware Tools installation cannot be started manually while Easy Install is in progress.

  When I try to install Vmware tools I agree... "" The VMware Tools installation cannot be started manually while Easy Install is underway "and I can't find out how to disable the easy installation and I am sure that its even not used because the operating system is in place and working well.  I searched the forum and google, but in vain :/  I'm running Ubuntu 9.10.

  If you have autoinst.flp in the VM directory - rename

  If you have autoinst.iso in the VM directory - rename

  where these files are present and/or configured in the vmx - the virtual machine will be launched in automatic installation mode that prevents the connection files iso vmware-tools

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• ESXi on HP BL460C to EVA SAN, Installer does not see the disk non - ESX(I) Although not

  We have a BL460C with qlogic (QMH2462), talk to an EVA 4400 SAN with LUNS = 1 presented for a boot disk and LUN = 2 for the data store.

  San switch is Silkier, if all the paths are visible.  We have installed ESX 3.5.0 u3 on this blade to the same LUN.  The goal is to support an environment entirely multichannel without interaction of zoning, so far all porous bones have been configured to work fine until we tried ESXi

  When we try to install ESXi 3.5.0 u3 for the same logical unit number, the installer décompacte, starts, appears to find the discs and stops with an error "device cannot find support to write... on the image for.

  Is there a driver/known compatibility issue with the ESXi installation program that prevents installation in a multi-channel environment?

  I don't think that ESXi supports booting from SAN.  This is perhaps where the fuse box is.

  You must use the local storage, or possibly a 1 GB (or more) USB stick to boot from.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

• Why so many (6) "Password set out" Dialogues?

  I use Thunderbird on Win 8.1 with master password password manager. I'm also under Lightning and provider for Google Calendar. I get 3 calendars of mine over a few general calendars. When I run Thunderbird I sign on 6 times. It sounds ridiculous. Why have a master password if other add-0ns cannot use it?

  It should be a simple matter to define an indicator if the user has entered a master password. If the flag is set, the Add-ons know they can use their passwords stored without worrying about the user.

  What Miss me?

  Hi Zenos,

  First of all, thank you very much for pointing me to startupmaster. This is the type of behavior I was looking for.

  Re: version, I'm under 31.4. The week last, to try to see if the residue of prerequisites installs a TB prevention work properly, I have done a complete uninstall, restart, deleting all files of TB and profiles, another reboot then reinstall. I came back just as I mentioned in my original post. It has not been set

  Once again, thanks so much.

• Satellite A665-14R - drivers not available for Windows 10

  Hello
  I tried to search Toshiba A665-14R drivers but drivers are not available for Windows 10, if I'm looking for the section Drivers on the toshiba Web site and select my computer model A665-14R then no driver rises, I think toshiba assuming that A665-14R cannot install Windows 10 rather I have 8 GB of RAM & CPU Intel i7 with a 3D graphics card! Its not like my laptop is old and cannot load windows 10, Microsoft has already tested and approved my laptop to window windows installed 10, since I have installed 10 my laptop works fine but I am not able to install TOSHIBA PC Health Monitor, Synaptics Pointing Device Driver, installation of equipment TOSHIBA TOSHIBA value added package Etc Etc

  Its really annoying that I can't scroll down pages because the Synaptics pointing device has no update
  Any help please?
  Thank you

  This model is quite old and has been supported for Win7. I can just say... no luck. A lot of older machines may well work with newer operating systems, but they are not officially supported.

  What should do? Try to check if the drivers, tools and utilities for a newer machine with similar hardware can be used on your laptop Satellite A.

  I had the similar problem in the past with Vista and no supported Win7.

• Satellite A200-1TS (PSAE6E) freezes

  Hello world

  First of all, my English is very bad, so I hope someone can understand me. In any case thanks for the effort.

  I have a Toshiba A200-1TS I bought 10 months ago. I have two problems that I don't know how to solve. One of the problems is that Vista SP1 starts very slowly, it takes about 4-5 minutes before I can use any program. I have a long startup list, but many of these startup applications come from drivers Toshiba so I guess they can't be disabled. Here is the list I have...

  http://www.imageflux.NET/ver.php?v=774738startup.jpg

  As you can see, I added 3 applications, Comodo Firewall, Antivir Personal Edition and Driver printer HP4380. I installed these applications on my other computer and I don't think they are the reason for the slow start. The boot process is fast until I see the office, then the volume, network and battery icons are loaded, and after that I have to wait 2 minutes see the Comodo or Antirvirus icon...

  I am very disappointed with that because my computer have never started quickly (my sister has a computer with a slower processor (NOT T7500) and does not have these problems). After 10 minutes of my Toshiba becomes what it takes 'Ferrari' (sorry jeje).

  The second problem is more serious. I can't use any of the Fn keys(F1-F12) because my computer hangs when I press the fn (the one which is near the CTRL key). I noticed this problem two months ago (my work leaves me not a lot of time to solve this problem) and I decide to reinstall with the CD of factory two weeks ago.

  Everything was fine, I use no problem for 3 three days and after a Windows Update, I noticed the problem again. Then I formatted my HARD drive and I installed a clean Windows Vista SP1 version (thinking that might be a problem of Factory Settings CD so I spent money for nothing), I installed the drivers from the website of toshiba europe, everything seemed OK, but once again after a Windows Update, I can not push FN key because my computer crashes.

  I don't know if it could be a Windows problem. Yesterday when I went to sleep, worked the keys Fn and hardware configuration. I accept the updates of windows and does not check after the process.

  Today, the computer crashes when I try to load the installer of equipment, or when I press the FN key, so can't change brightness, turn off the touchpad or use the zoom utility (use of flash-cards with the mouse is OK, but I prefer to use the FN keys).

  Thank you in advance.

  Hello

  I also put t that this could be a hardware problem, due to the fact that your machine and the FN keys worked properly after installing new Toshiba DVD recovery.

  I recommend you to download the new VAP Toshiba Toshiba European pilot page and reinstall.
  You need to remove the old VAP first. Then clean the BONES and the registry using the CCleaner (it the free tool) and after a reboot reinstalled the VAP.

• Outage map mother Toshiba P10 - 504

  I recently had a major problem with my Toshiba P10-504. I have no idea how it is happened, but according to the Toshiba people who are setting the motherboard has failed. This meant that when trying to turn it on all I got was the blue light and noise from the fan and eventually the HD spinning round and not display at all. The cost of fixing, it was quoted at around £450 and it will take a couple of weeks. As you can imagine I have never wanted to meet this problem again and would really like to understand how it happened. Any information would be great. To help here's a list of everything I did and didn t before it crushed that may be useful:

  Before the crash
  (1) installed a new module of memory: 1 GB DDR333 SODIM (brand pqi?) - I have installed the module a week before that the system failed and it was working fine. I m worried of course re - install the module when the laptop is returned (tips?).

  One the day of the accident
  (1) set processor scheduling to basic services to increase performance of audio software
  (2) turned all power and all patterns always found hibernation modes these boring
  (3) set the swap file for virtual memory to about 1.2 GB just to experiment with different performance settings, although this was probably a bit excessive.
  (4) after the three things above do I simply close the lid, no request was running and the system had not yet been arrested and was running on batteries. That s the last time it worked.

  The laptop had not known physical damage.

  Thanks for reading through it all - I hope that m make sense. Any comments would be greatly appreciated.

  Chris.

  Hi Chris

  Looking at the list of things you've done I don't see anything that could damage the computer.
  Installation of equipment (memories, PC cards and so on) is always a 'risk', but as long as you keep the standards and use your head instead of force, you should be pretty safe.
  Since the memory was running in your machine for a week, it seems very unlikely that it can be the cause of the problem.
  My long experience with the mobile equipment service tells me that I have but a very few cases have seen software damaging hardware. It is possible in theory, but in real life - this is the last possibility on my list anyway.
  Stuff in the breeze computer most of the time for no reason visilible - means that he does not want to break because of misuse, improper handling or bad software. He breaks everything.
  Looking at the number of "parts" 1 computer have inside (besides just motherboard, memory, hard disk and so on but counting of connectors, transistors in the large chips, welds on big and so chips suite) I (my personal point of view) feel sometimes that it is lucky that they do not break.

  So to answer your question: just take care of your computer normally, stick to hardware options that are made for your computer (prefer original Toshiba) and you did your part of the deal :)

  BR

  Tom

• Re: Satellite U500-17 t Ducati - cannot start the BIOS update tool

  Brief description of the problem:

  I got by Satellite U500-17 t Ducati with Vista on board and he downgraded to XP Pro SP3.

  Everything works fine, but I can't start * [self-extracting tool Windows BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 4 & d = yearuploa & monthupload = & dayupload = & useDate = null & mode = Chinas allMa & search = & action = search & macId = & country = all & lectedLanguage be = 13 & type = 4 & page = 1 & ID = 73306 & DISO =-1 & driverLanguage = 42] *. It works simply and nothing happens.

  For my previous experience of Toshiba laptops I remember that I have to install some tools Toshiba to make possible update BIOS, so I installed * [common Module | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 93 & ad = yearuplo & monthupload = & dayupload = & useDate = null & mode = g machines & search = & action = search & macId = & country = all & electedLanguage s = 13 & type = 93 & page = 1 & ID = 71037 &] DISO = 10 & driverLanguage = 42] * and * [Hardware Configuration | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 855 selSho rtMod = 887 & language = 13 & selOS = 10 & selType = 259 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 259 & page = 1 & ID = 71076 & DISO = 10 & driverLanguage = 42] *. Well, installation of equipment installed OK and really works with the BIOS, but steel Toolbox update does not work.

  So the question is - what to do to run the Windows-based update of the BIOS?

  HW: Satellite U500-17 t Ducati (PSU5EE-01G029ND)

  OS: XP Pro SP3

  Can you please tell us why you want to update the BIOS of your laptop?
  You may have noticed a problem that must be fixed with a BIOS update?

  Is WXP SP3 you use original Toshiba recovery image?

• Time Capsule loses connection to the internet every day

  I have a time Capsule airport of 5th generation TB 3 (802.11 AC, A1470).  For the past year, I lost the connection Wireless to the internet once a week or more.  In recent weeks, he has taken place more frequently and often now also 3 - 4 times / day.  During the internet cut, the light on the Time Capsule still green watch, but none of my devices are able to get to the wireless (3 iPhones, iPod Touch, iMac and 2 MacBook Air, Bose Speaker).   I can restore internet connectivity by cutting and then by restarting the power of the time Capsule.    All phones and computers are running the latest software updates.  Airport Time Capsule is running 7.7.3

  We do not know if you have a service provider problem, a problem of modem or a matter of Time Capsule.

  Provider number... check with your service provider to ask them if they are experiencing loss of momentary service due to new installations of equipment on their service. They will most certainly say that their service was perfect and the problem lies elsewhere, but it does not hurt to check.

  Modem question... If the modem loses its connection to the service from the provider, even just for a moment, then the Internet will go down and the time Capsule which landed.  Unfortunately, there is no easy way to test the modem.  All you can do is connect a computer directly to the modem for a few days and check the connection from time to time to see if it fell.

  If so, this indicates that you that you might have a problem with the son of Internet that come into your home to the wall outlet, if you do not want your provider to send a technician to check and test the line to come in your House.

  If the wiring checked out OK, then you may have a problem of modem and the modem will probably be replaced... regardless of his age. If the modem is more than 4-5 years old, then it really must be replaced at this point.

  If you have not replaced the Ethernet cable from the modem in a few years, it would be a great time to do this.  There are some modems that just don't get along well with Apple routers... Motorola 6121 SB, SB 6141 and SB 6183 come to mind.  What is the number and model of your modem?

  Matter of Time Capsule... If there is no connection drops during your modem 2-3 days 'test' with a computer connected directly to the modem, then the time Capsule becomes the suspect.  About everything you can do in this case is to reset the device back to the default and then put settings in place again to see if this will help the issue. If you don't want to do it... and you have an Apple Store close to home... you can take the time Capsule to them and make them run tests on the Time Capsule.

  As you can imagine, 99 times out of 100, no problem you will find when you take the Capsule in the Apple Store because the drops intermittent are by far the most difficult problem to resolve.

• HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

  Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

  Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

  I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

  I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

  I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

  Has anyone seen this problem before or a solution?  Thank you for help.

  What follows is my computer information system:

  Name of the Microsoft® Windows Vista™ Home Premium operating system
  Version 6.0.6002 Service Pack 2 Build 6002
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer HP-Pavilion
  System model RX885AA-ABA a6000n
  System Type X 86-based PC
  Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
  Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.0.6002.18005".
  Username
  Daylight saving time from the centre of zone
  Physical memory (RAM) installed 2.00 GB
  1.87 GB total physical memory
  Available physical memory 775 MB
  Total virtual memory 3.99 GB
  2.49 GB available virtual memory
  Page file space 2.17 GB
  Paging file C:\pagefile.sys

  HP Pavilion a6000n specifications

  Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

  First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

  Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

  Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

  I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

  After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

  Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

  Thanks for the reply and assistance Erico.  Installation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

• acquisition of signals from multiple cards simultaneously

  Hello

  I am trying to acquire the signal of my cards OR PXI simultaneously but having some difficulties to implement which.

  Here is my configuration:

  Installation of equipment:

  (1) chassis NI SMU-1071

  (2) map of NI PXI - 4461-2 I / P and O/P 2

  (3) map of NI PXI - 4492-8 I / P

  Here is the acquisition code I wrote:

  

  The problem is that when I use the I / P channels on the same card (4461 or 4492) then, the code works well, but if I use the channels of entry on two simultaneous cards then I get an error message:

  "

  200106 error occurred at DAQmx Read (analog 1 Wfm NChan NSamp d) .vi:

  Possible reasons:

  Property must have the same value for all channels on the device.

  Property: RefClk.Src

  "

  I tried to set the clock reference to "The clock on board", but I still get the same error.

  What should I do to reslove this problem?

  Thank you

  Ritesh

  Hi Ritesh

  Have you tried to import a common clocks ref for 2 boards? This is not supported by all devices, but for those that you combine, this should be confirmed as you can see on page 44 of this document.

  WenR